What are the hazardous flammable solids in Subject 4?

3 Answers
WillowRose
09/03/25 3:48am
Hazardous flammable solids in Subject 4 include matches, etc. Below is an introduction to the knowledge about the driver's license test: 1. Definition of driver's license: The full name of the driver's license is the motor vehicle driver's license, also known as "driver's license," which is the certificate required by law for motor vehicle drivers to apply for. 2. Definition of Subject 1 test: Subject 1, also known as Subject 1 theory test or driver theory test, is part of the motor vehicle driver's license assessment. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the test content includes driving theory basics, road safety laws and regulations, local regulations, and other related knowledge. The test format is computer-based, with 100 questions, and a score of 90 or above is required to pass.
Was this review help?
17
3
Share
MalachiFitz
09/15/25 5:26am
In the subject four content I learned while getting my driver's license, hazardous flammable solids mainly refer to some common solid items in daily life that are prone to combustion. For example, sulfur, commonly found in gunpowder or agricultural products, becomes extremely dangerous when exposed to heat sources; matches are self-explanatory, as they can ignite with just a touch from a lighter; rosin, used in musical instruments or glue, can catch fire with just a bit of friction; and dry phosphorus, often found in chemicals, can spontaneously combust when exposed to sunlight. These are key points in the driving test because if the cargo compartment is hot or experiences friction during transportation or loading, it can lead to a fire. Drivers must know to avoid them. I remember the mock test included questions on safe storage, such as maintaining ventilation and isolating heat sources, otherwise the consequences could be severe. When driving normally, don't casually leave these items in the car, as even a small spark could lead to a tragedy.
Was this review help?
18
3
Share
Expand All
DanielaAnn
09/15/25 5:28am
In the subject four exam, the knowledge points about dangerous flammable solids are quite practical, including sulfur, matches, rosin, and phosphorus. Sulfur is commonly found in firecrackers or pesticide storage, matches and flint are well-known for being easy to ignite, and rosin is widely used in adhesives, catching fire with just a little friction. While studying these, I wondered why the exam emphasizes them? It's because vehicle vibrations or high temperatures during transport could trigger them. For example, if sulfur is stored in the car trunk in summer with improper packaging, heat generated from tire friction could cause it to catch fire. New drivers are most likely to overlook this, so the subject four exam tests how to handle such emergencies, such as parking away from fire sources and using fire extinguishers. In short, memorizing this list can prevent major accidents. Safety comes first, so checking cargo before driving is crucial.
Was this review help?
7
2
Share
Expand All
More Forum Discussions

Does hitting a tire affect the suspension?

Tire impact can affect the suspension. Hitting a curb with a tire can have certain impacts on the tire, wheel rim, suspension, and shock absorbers. Severe impacts can damage the tire, causing sidewall bulges, blowouts, wheel rim deformation, or even suspension damage, leading to body distortion, unusual noises, and damage to the shock absorbers and steering system. More related information is as follows: 1. Suspension System: The suspension system refers to all the force-transmitting connecting devices between the car's frame and the axle or wheels. Its function is to transmit forces and torques between the wheels and the frame, cushion the impact from uneven road surfaces to the frame or body, and dampen the resulting vibrations to ensure smooth driving. If there are issues with the suspension, immediate inspection and repair at a 4S shop are necessary. 2. Note: Frequently and incorrectly mounting curbs can cause significant damage to the car's chassis, suspension, and shock absorbers. If the driver misjudges the height gap between the curb and the chassis, it can lead to the chassis scraping or even damaging critical components like the oil pan. Long-term parking with wheels on curbs can also cause uneven suspension stress, leading to abnormal wear.
19
3
Share

What speed should be maintained during the sprint in Subject 3?

During the sprint in Subject 3, the speed should be maintained between 40 and 60 km/h, but not exceeding 60 km/h. Here is some relevant information: 1. Subject 3: Subject 3, which includes the road driving skills test and the safe and civilized driving knowledge test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safe and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle being licensed. 2. Test content: The road driving skills test for Subject 3 generally includes preparation before getting on the vehicle, simulated light test, starting, driving in a straight line, gear shifting operation, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, etc. The safe and civilized driving knowledge test generally includes requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and knowledge of handling after traffic accidents.
5
2
Share

What is the Difference Between L and T in Cars?

The differences between L and T in cars are: different references, different power smoothness, and different maintenance. Here are the relevant explanations: 1. Different references: L is the English abbreviation for the capacity unit liter, referring to a car's naturally aspirated engine. T is the abbreviation for TURBO, meaning turbocharging, indicating that the car is equipped with a turbocharging device. 2. Different power smoothness: Models with L, being naturally aspirated, exhibit linear growth in power. Models with T, due to the turbocharging device, experience a sudden surge in power when the engine speed reaches 2000 to 3000 RPM. 3. Different maintenance: Naturally aspirated engines are technologically mature and have lower requirements for maintenance consumables like engine oil. Even lower-grade oil can meet the lubrication needs of the engine, resulting in lower daily maintenance costs. Turbocharged engines, being newer in technology and less mature in craftsmanship compared to naturally aspirated engines, have higher requirements for engine oil, necessitating the use of synthetic oil. Additionally, daily maintenance requires more items, leading to relatively higher costs.
13
1
Share

What is the reason for the decline in braking performance of c1441?

In this situation, if there is no alarm on the dashboard, it is generally necessary to check two areas: first, check whether the brake pads are worn thin, and if so, replace the brake pads; second, check whether the tire tread has become bald, and if so, new tires need to be replaced. More related information is as follows: 1. Automobile braking performance: Automobile braking performance (braking-properties-of-motor) refers to the ability of a car to forcibly decelerate or even stop while driving, or to maintain a certain speed when going downhill. The braking process of a car is artificially increasing the driving resistance of the car, which is carried out with the help of wheel brakes, the engine, or special auxiliary brakes. 2. Note: During braking, the tangential reaction force (i.e., braking force) opposite to the driving direction of the car is generated by the interaction between the braking wheels (usually both the front and rear wheels of the car are braking wheels) and the road surface, which has a decisive influence on the braking performance of the car. Its maximum value depends on the adhesion between the tire and the road surface. The evaluation indicators of braking performance are: braking deceleration, braking time, and braking distance.
10
4
Share

Should a slightly deformed crash beam be repaired or replaced?

Whether to repair or replace a deformed rear crash beam depends on the extent of deformation. If it's a slight deformation, replacement may not be necessary, but if it's a large-scale deformation, it's better to replace it. Here are some precautions to avoid rear-end collisions while driving: 1. Maintain a certain distance from the vehicle in front in traffic: In traffic, try to avoid driving directly behind the vehicle in front. It's best to keep a certain distance and slightly offset from the vehicle ahead. This not only provides early warning but also makes it easier for the vehicle behind to observe the situation ahead, reducing the risk of being rear-ended. 2. Pay extra attention when changing lanes: Changing lanes or merging randomly on the road is one of the biggest causes of rear-end collisions. In accidents caused by forced lane changes, the merging party is usually held fully responsible. 3. Use "tap braking" when applying the brakes: When braking, try to use "tap braking." This not only alerts the vehicle behind but also provides them with reaction time and a buffer distance, thereby reducing the chance of being rear-ended.
2
5
Share

What is the reason for one wiper moving while the other remains stationary?

It may be due to a fault in the wiper motor's wiring. Here is some relevant information about wipers: 1. Working principle: When operating the wiper handle, the demand signal is transmitted to the BCM (Body Control Module), which then sends a start signal to the wiper motor. The wiper motor controls the wiper arm to perform the corresponding action. This is the working principle of the wiper. 2. Precautions: The wiring of the wiper's working principle differs from that of other electrical appliances. Other appliances turn off the positive pole (commonly known as the live wire), while the wiper wiring turns off the negative pole (commonly known as the ground wire or earth wire). This is why the wiper blade stops at the bottom of the windshield when the wiper switch is turned off at any position. Since the switch turns off the negative pole, if the wiper blade is turned off at another position, the C-shaped metal ring on the turbine inside the wiper assembly will still be connected to the car body, forming a working circuit. The wiper blade will continue to move until it reaches the opening of the C-shaped metal ring and stops.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.