What are the hatchback models of Kia?

Is It Safe to Leave Your Car at a Repair Shop?

When getting your car repaired, try to avoid leaving it at the repair shop, especially overnight. Car repair precautions: 1. Verify vehicle information: The most critical details are the engine number and chassis number. Before repairs, carefully check these against the numbers on the vehicle registration to prevent mistakes. 2. Inspect repair items: Understand which repair services have been performed and ensure they do not exceed the agreed scope to avoid unnecessary costs. 3. Reclaim replaced parts: Car owners have the right to reclaim replaced parts, so it's advisable to take them back to prevent reuse. 4. Check mileage and fuel gauge: If the car cannot be driven away immediately and requires overnight stay, remember to note the mileage and fuel gauge position to prevent unauthorized use by the repair shop. 5. Review the repair bill: Carefully examine the repair invoice to confirm whether the replaced parts were necessary and if any extra parts were replaced unnecessarily.

10

3

Share

Does the Passenger Seat Have an Airbag?

Passenger airbags are installed in front of the passenger seat, typically above the glove compartment on the dashboard, serving as a passive safety feature. Below is additional information about airbags: 1. Composition of Airbags: Primarily consists of airbag sensors, collision airbags, and electronic control units. 2. Locations of Airbags: (1) On the driver's side, collision airbag devices are located in the steering wheel, while on the passenger side, they are generally installed on the dashboard. (2) Airbag sensors are installed on the left, right, and center partitions of the driver's compartment. (3) The central airbag sensor and the airbag system are integrated with the electronic control unit.

17

0

Share

What is the fuel consumption of the Tang DM-i?

The NEDC comprehensive fuel consumption of the Tang DM-i is 1.2L/100km, and the minimum charge-sustaining fuel consumption is 5.5L/100km. Factors affecting fuel consumption: The driving habits of the driver, road conditions, the weight of items placed in the car, whether the air conditioning is on, and whether the vehicle is in the break-in period, among other factors, will all affect the vehicle's fuel consumption. Ways to reduce fuel consumption: Drive at a constant speed, adjust the vehicle's speed appropriately while driving to avoid sudden braking; do not open windows when driving at high speeds, as opening windows at relatively high speeds will increase fuel consumption; regularly check tire pressure to ensure it is accurate. Insufficient or excessive tire pressure will increase fuel consumption, so it is necessary to check tire pressure regularly.

5

4

Share

What Causes Severe Jerking When Braking to a Stop?

Severe jerking when braking to a stop is mainly caused by excessively worn brake pads that need replacement. Here are methods to determine when to replace brake pads: 1. Judging by the wear condition of the brake pads: A new brake pad typically has a thickness of about 1.5cm, which gradually thins with continuous friction during use. When visual inspection shows the brake pad thickness has reduced to approximately 1/3 of its original thickness (about 0.5cm), the owner should increase self-inspection frequency and prepare for replacement. 2. Judging by sound: When the wear indicators on both sides of the brake pad are directly rubbing against the brake disc, it indicates the brake pads have exceeded their wear limit. If a hissing sound accompanies light braking, this means the brake pads must be replaced immediately.

14

5

Share

2019 Sagitar Brake Noise Issue?

The causes of brake noise in the 2019 Sagitar are as follows: 1. Break-in period for new cars, where brake pad bedding is a crucial part. It usually takes a few hundred kilometers of driving before the brakes feel smoother. 2. Brake noise may occur after driving through water, mainly due to loss of lubrication caused by driving through puddles on rainy days, leading to brake wear or possible rust from water exposure. 3. While driving, very small particles may get between the brake pads and rotors, sometimes causing noise due to friction. This usually doesn't require repair, as the particles will fall out during normal driving. 4. Excessively worn or too thin brake rotors may also produce noise. 5. Missing or damaged brake rotor mounting screws can cause brake noise. 6. Brake system malfunction, which requires inspection and repair.

17

2

Share

What is the reason for the high RPM of the Emgrand GL?

The reason for the high RPM of the Emgrand GL: There is a fault in the intake system, and it should be inspected and repaired at a 4S shop as soon as possible. More information about the Emgrand GL is as follows: 1. The Emgrand GL is equipped with a 3.5-inch TFT color screen trip computer, an 8-inch touch screen, as well as intelligent connectivity systems such as G-Netlink, G-Link, and CarPlay, along with technological features like GPS navigation and voice control. 2. Among the 10 standard features of the Emgrand GL, 6 are focused on comfort and convenience, including keyless entry with one-button start, a multifunction steering wheel, automatic climate control, one-touch up and down power windows with anti-pinch function for all four doors, rear USB charging ports, and a 4/6 split-folding rear seat backrest.

1

3

Share

What are the hatchback models of Kia?

Is It Safe to Leave Your Car at a Repair Shop?

Does the Passenger Seat Have an Airbag?

What is the fuel consumption of the Tang DM-i?

What Causes Severe Jerking When Braking to a Stop?

2019 Sagitar Brake Noise Issue?

What is the reason for the high RPM of the Emgrand GL?

What is the fuel consumption of the Passat 2.0T?

How often should the Tiida fuel filter be replaced?

How to Replace the Battery in an Old BMW X3 Remote Key?

How to Deal with Rust Water Dripping on Car Paint?