What are the harms of leaving a manual transmission car in gear when parked?

Where is the production location of Dongfeng Honda?

Dongfeng Honda's production facility is located in the Wuhan Economic and Technological Development Zone. The vehicles produced there include the Jade, Civic, Greiz, Gienia, and Envix. Taking the 2021 Dongfeng Honda Civic as an example, it is a compact car with the following dimensions: length 4517mm, width 1799mm, height 1434mm, wheelbase 2700mm, and a curb weight of 1343kg. The 2021 Dongfeng Honda Civic features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 117PS, maximum torque of 220Nm, and maximum power of 130kW, paired with a CVT continuously variable transmission.

13

1

Share

How to Play Songs from a USB Drive in Lavida?

The method to play songs from a USB drive in Lavida is: Insert the prepared USB drive into the USB port, then operate and play through the central control display. Taking the 2019 Lavida as an example, it is a compact car with body dimensions of: length 4613mm, width 1765mm, height 1460mm, wheelbase 2610mm, and curb weight 1210kg. The 2019 Lavida features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 112PS, maximum power of 82kW, maximum torque of 145Nm, paired with a 5-speed manual transmission.

15

3

Share

How to Repair Auto Body Panels?

Methods for repairing auto body panels are: 1. Dent folding method: Used to repair stretched deformation areas. During operation, create some folds in the stretched deformation area. The folded area will be slightly lower than other parts. Fill it with putty, then smooth it with a file and repaint. 2. Heat shrinking method: Heat the area that needs panel repair. When the temperature rises, the steel plate will expand towards both sides, creating stress on the surrounding areas. When the temperature continues to rise until the metal softens, the surrounding steel plate will restore its shape. Methods for maintaining auto paint are: 1. Wash the car after the engine has cooled down. 2. Reduce exposure to direct sunlight. 3. Clean stains on the car body promptly. 4. Rinse with clean water after rain to prevent acid rain corrosion. 5. Apply wax or glaze.

9

2

Share

Where to Add Windshield Washer Fluid in the Magotan?

Windshield washer fluid in the Magotan is added to the washer fluid reservoir located in the engine compartment. The steps to add windshield washer fluid are as follows: 1. Open the hood and locate the washer fluid filler port; 2. Remove the cap and pour the washer fluid into the reservoir; 3. Observe the fluid level until it reaches the marked line. Taking the 2020 Magotan as an example, it is a mid-size sedan with the following dimensions: length 4865mm, width 1832mm, height 1471mm, and a wheelbase of 2871mm. The curb weight is 1445kg. The 2020 Magotan features a front McPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4L turbocharged engine, producing a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.

12

2

Share

What to Bring for the First Maintenance of Haval H6?

Items required for the first maintenance include: driver's license; maintenance manual; vehicle registration certificate; warranty manual; owner's ID card; vehicle's driving license; vehicle's purchase invoice. Bring these to the designated first maintenance facility for the vehicle's initial service. Important note: Make an appointment with the 4S store in advance. The first maintenance refers to the initial service after the new car has been driven. The specific time varies by vehicle, usually after driving 1,000 to 3,000 kilometers. The car needs to undergo the first maintenance promptly—neither earlier nor delayed. The completion of the first maintenance marks the end of the car's break-in period, allowing it to be driven at standard loads and normal speeds as required. The first maintenance time is calculated from the date of vehicle pickup. There are two indicator values for the first maintenance: mileage and time. Whichever indicator is met first will be the basis. First maintenance items include: oil change, oil filter replacement, cleaning the air filter, checking various fluid levels, inspecting the generator belt and wiper blades for damage, checking tire pressure and inspecting tires for damage or bulges, etc. Time required: Approximately 2 hours to complete all tasks. The most important part of the first maintenance for a new car is changing the oil and oil filter. When changing the oil, the oil filter must also be replaced. The choice of oil must refer to the Vehicle Usage and Maintenance Manual, as different models require different oil specifications. Maintenance precautions: Do not rinse the interior of the car with water: Many people clean their cars during holidays, washing the body with water and wiping it with a cloth. Here, it is important to note that the interior should not be directly washed with water. If the floor mats are dirty, use a vacuum cleaner or take them out, scrub them with a brush and detergent, dry them, and then put them back. There are many drainage holes under the rubber mats on the cabin floor. If water enters, it will not dry naturally but will flow through the holes to areas like the gearbox, causing erosion and corrosion. The best practice is to vacuum clean and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the antifreeze in the car is insufficient, it is recommended to drain the existing antifreeze and refill it with the same brand from the start. Since antifreeze brands differ, their chemical properties also vary significantly. Different types of corrosion inhibitors can corrode each other. Different brands of antifreeze use different corrosion inhibitors, so they should not be mixed to avoid unnecessary issues. Do not lubricate tire bolts and nuts: When the bolts on a moving car rust, they are often oiled to function properly again. To prevent rust on wheel bolts and nuts, some people apply lubricant, but this can pose safety risks. When the car is driven at high speeds, the bolts and nuts may loosen or even fall off, leading to driving malfunctions. Do not press the accelerator when starting an EFI car: The starter of an EFI car is different from that of a conventional car. Its fuel injection control device can automatically adjust the fuel supply based on the starter's temperature and operating conditions, ensuring a smooth start.

1

Share

What are the body dimensions of the Honda CR-V?

The body dimensions of the Honda CR-V are: length 4585mm, width 1855mm, height 1679mm, with a wheelbase of 2660mm. Taking the 2019 Honda CR-V as an example, it belongs to the compact SUV category, with a fuel tank capacity of 53 liters and a curb weight of 1642kg. The 2019 Honda CR-V features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 146PS, a maximum power of 107kW, and a maximum torque of 175Nm, paired with an electronic continuously variable transmission.

11

2

Share

What are the harms of leaving a manual transmission car in gear when parked?

Where is the production location of Dongfeng Honda?

How to Play Songs from a USB Drive in Lavida?

How to Repair Auto Body Panels?

Where to Add Windshield Washer Fluid in the Magotan?

What to Bring for the First Maintenance of Haval H6?

What are the body dimensions of the Honda CR-V?

Is It Normal for the Car to Shake When Revving in Neutral?

Which province in China does the license plate 'Dan K' belong to?

What does 0w20 engine oil mean?

Will restarting the engine after wading definitely damage it?