What are the German engine brands?

How Long Does Driving a Motor Vehicle Constitute Fatigue Driving?

Driving a motor vehicle continuously for 4 hours constitutes fatigue driving. According to Article 62 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," the following acts are prohibited while driving a motor vehicle: (7) driving a motor vehicle continuously for more than 4 hours without stopping to rest or stopping for less than 20 minutes. Fatigue driving manifests as the driver's physiological and psychological functions becoming imbalanced after prolonged continuous driving, resulting in an objective decline in driving skills. Consequences of fatigue driving: Continuing to drive while fatigued can lead to drowsiness, physical weakness, lack of concentration, impaired judgment, and even mental confusion or momentary memory loss, causing delayed or premature actions, inappropriate pauses or corrections in operation, and other unsafe factors, significantly increasing the risk of road traffic accidents. Therefore, driving while fatigued is strictly prohibited.

5

Share

What kind of car is LINK&CO?

LINK&CO is a brand name, known as Lynk & Co in Chinese. It is a premium joint venture brand between Geely Auto and Volvo Cars. Here is some information about Lynk & Co: 1. Lynk & Co utilizes the CMA architecture, which is a Compact Modular Architecture for mid-size vehicles jointly developed by Volvo Cars and Geely Auto, originating from Geely's European R&D Center. 2. The CMA platform offers flexibility and scalability, suitable for various body styles and vehicle sizes. It supports both traditional and new energy powertrains, including HEV hybrid and PHEV plug-in hybrid systems, and is compatible with multiple powertrain configurations. This enables the creation of vehicles equipped with active safety, intelligent driving, and connectivity technologies for users.

7

0

Share

How to Use the Focus Windshield Wiper?

The method to use the Focus windshield wiper is as follows: 1. Push the entire wiper control lever down one position for a single wipe. 2. Push it up one position for intermittent wiping mode. 3. Push it up two positions for low-speed wiping mode. 4. Push it up three positions for high-speed wiping mode. 5. Pull it back one position for front wiper washer. 6. Push it forward one position for rear wiper washer. Introduction to the Focus: 1. Body dimensions: Length is 4647mm, width is 1810mm, height is 1468mm, and wheelbase is 2705mm. 2. Powertrain: Equipped with a 1.5L naturally aspirated engine and a 6-speed manual transmission, with a maximum power of 90 kW and a maximum torque of 153 Nm.

1

3

Share

What is the tire size of the Jade?

The Jade has two tire size models: 215/50R17 and 225/45R18. The numbers 225 and 215 represent the tire's section width in millimeters (225mm and 215mm, respectively); 50 and 45 represent the tire's aspect ratio; and 17 and 18 represent the rim diameter in inches (17-inch and 18-inch, respectively). The Honda Jade is equipped with Bridgestone Potenza tires. If you want to replace the tires yourself, you can follow these steps: Retrieve the spare tire and jack, place the jack under the vehicle frame near the tire to be replaced, ensuring the jack contacts the metal part of the frame; Raise the jack until it supports the car, making sure the jack is positioned under the vehicle and at a right angle to the ground; Remove the hubcap and loosen the nuts counterclockwise, but do not fully remove them—just enough to eliminate resistance. Keeping the tire on the ground when loosening the nuts ensures that the nuts turn rather than the tire; Turn the nuts counterclockwise until they are loose, repeating this step for all lug nuts, then fully remove the nuts; Place the new tire on the wheel hub, carefully aligning the tire rim with the wheel bolts, then install the lug nuts and hand-tighten them until all nuts are snug. At this point, the tire replacement is complete. In addition to the model, tires also display the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tires. Speed rating: Indicates the maximum speed a tire can carry a specified load under defined conditions. Letters A to Z represent certified speed ratings ranging from 4.8 km/h to 300 km/h. Common speed ratings include: Q: 160 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h. Rim specification: Indicates the rim size compatible with the tire, such as "Standard Rim 5.00F."

14

0

Share

What are the signs before a tire bursts?

Tire bulging is a precursor to tire blowouts. If bulging is detected, it is recommended to immediately inspect, repair, or replace the tire. Below is relevant information: The sidewall of a tire is very thin, with the carcass layer providing reinforcement to the side. Bulging or even blowouts can easily occur at damaged areas of the carcass layer, and such damage cannot be repaired. Situations where tires cannot be repaired include: severe damage to the sidewall, puncture holes in the tread exceeding 6mm in diameter, damaged or deformed bead, rubber corroded by chemicals, tire bulging, or damage from running flat. Situations where tires cannot continue to be used: 1. The tire has worn down to the tread wear indicator marks, which indicate the legal minimum groove depth of 1.6mm. Continuing to drive poses serious safety risks. 2. The tire has suffered severe damage, such as hitting a curb, falling into a pothole, or being punctured by a nail, which can cause significant harm. If the damage is on the sidewall, replacement is advised as sidewall damage cannot be repaired. 3. The tread is deformed or shows obvious cracking. In such cases, a professional repair shop should be consulted to determine whether to continue using or replace the tire.

9

2

Share

How to Adjust the Height of Civic Seat Cushion?

The method to adjust the height of the Civic seat cushion is as follows: 1. There is a handle on the left side of the passenger seat. Lifting it up increases the height, while pressing it down lowers the seat. 2. Generally, the car seat adjustment switch is located on the side of the seat. Seat adjustment switches can be manual or automatic, with the same function and principle, only the control method differs. 3. Extension: The adjustment of car seat height should consider various factors such as the driver's height, arm length, and the distance of the steering wheel from the body. There should be at least a fist's distance between the head and the car roof; the height of the hands on the steering wheel should be about 10 cm below the shoulders.

11

3

Share

What are the German engine brands?

How Long Does Driving a Motor Vehicle Constitute Fatigue Driving?

What kind of car is LINK&CO?

How to Use the Focus Windshield Wiper?

What is the tire size of the Jade?

What are the signs before a tire bursts?

How to Adjust the Height of Civic Seat Cushion?

What kind of engine oil should the Explorer use?

Is it necessary to depress the clutch when braking with a manual transmission?

What is the fault when the EPC light comes on in the Lavida?

How to Start the Hongqi H5 with the Car Key?