What are the general maintenance items for a car?

2 Answers
BraydenLynn
07/24/25 7:28am
General maintenance items for a car include: engine oil, oil filter, air filter, cabin air filter, fuel filter, throttle body cleaning, engine cleaning, carbon deposit removal, transmission fluid replacement, brake fluid replacement, coolant replacement, spark plug replacement, checking for shock absorber leaks, inspecting tire tread for replacement needs, and engine cleaning. Car maintenance, also known as vehicle servicing, refers to the regular preventive work of inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle. It mainly includes maintenance of the engine system, transmission system, air conditioning system, etc. The purpose is to keep the vehicle clean and tidy, maintain normal technical conditions, eliminate potential hazards, prevent faults, and extend the service life.
Was this review help?
16
2
Share
MacLawson
08/11/25 3:09am
Every time I go for car maintenance, it's mainly to keep the car in optimal condition. First, changing the engine oil and oil filter is a basic step to ensure smooth engine operation and reduce wear. Next, the air filter is checked and replaced if it's too dirty; otherwise, the engine will struggle. Tire pressure needs to be adjusted accurately. Since my car often runs on highways, incorrect tire pressure can easily lead to blowouts or uneven wear, so it must be measured and adjusted properly. The braking system is a key focus, checking the thickness of the brake pads and the level of brake fluid to avoid skidding in emergencies. If the coolant is insufficient, the car can easily overheat in summer, so it's important to check the level. Lighting is also inspected to ensure both front and rear lights are working for safe nighttime driving. Cleaning battery terminals prevents corrosion and extends battery life. The cabin air filter is replaced during seasonal changes to avoid poor air quality inside the car. The chassis and suspension should also be inspected to prevent oil leaks or rust. After each maintenance session, the car drives more smoothly and repair costs are reduced. Regular maintenance also improves fuel efficiency, making long-distance driving more reassuring.
Was this review help?
5
5
Share
Expand All
More Forum Discussions

What is the displacement of the Audi Q8?

The displacement of the Audi Q8 is 2.0t and 3.0t. Displacement is a specialized term in hydraulic transmission, referring to the volume of fluid inhaled or discharged per stroke or cycle. Taking the 2021 Audi Q8 as an example, its body dimensions are: length 4986mm, width 1995mm, height 1693mm, wheelbase 2998mm, and minimum ground clearance 218mm. The 2021 Audi Q8 is equipped with a 2.0t turbocharged engine, with a maximum power of 180kw and a maximum torque of 370nm, paired with an 8-speed automatic transmission.
2
2
Share

How to Remove the Seat Belt Buckle?

The method to remove the seat belt buckle is: it needs to be taken to a 4S shop for removal. The seat belt is a device in the car designed to ensure that passengers and the driver are protected and reduce injuries when the vehicle is subjected to a violent impact, providing a fixed cushioning effect. The method of using the seat belt is: 1. Pull out the seat belt and fasten the buckle to ensure the belt secures the body; 2. Adjust the position of the waist belt so that it sits on the hips; 3. Adjust the position of the shoulder belt so that it crosses diagonally over the collarbone; 4. Before driving, check if the seat belt is secure to ensure its normal performance; 5. Hold the buckle and press the release button to retract the seat belt into the retractor, then place the buckle in the storage position.
19
0
Share

How Long After Painting Can You Polish?

Polishing can be done 3 to 7 days after painting. Washing the car is possible 24 hours after painting. Generally, under standard painting processes, the paint surface can be touched after 2 hours, and by 24 hours, the paint hardness reaches about 80%, making it safe to wash the car. The polishing method involves: 1. Washing the entire vehicle with a high-degreasing paint cleaner, avoiding the creation of new scratches by abrasive particles during cleaning; 2. For paint surfaces with defects like coarse particles, fine sandpaper marks, or flow marks, gently sand them flat using water sandpaper wrapped around a small rubber block before polishing; 3. Using a mechanical grinder (electric or pneumatic) with coarse polishing compound to rough grind the sandpaper marks, followed by mechanical polishing.
18
4
Share

Why Does the Motorcycle Make Loud Noise When Throttling Up?

The reasons why a motorcycle makes loud noise when throttling up are: 1. The loud noise may be due to an issue with the exhaust pipe—check for any cracks; 2. If the throttle response is slow, inspect the carburetor and throttle cable; 3. If the motorcycle vibrates excessively, vibration while revving in neutral indicates an engine problem, whereas vibration during riding requires checking whether the bearings of the front and rear wheels are worn or if the mounting screws are loose. A motorcycle is a two- or three-wheeled vehicle driven by a gasoline engine and steered by handlebars controlling the front wheel. It is lightweight, flexible, and fast, widely used for patrol or passenger and cargo transport, and also serves as sports equipment. Motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes.
3
3
Share

What's the reason for the squeaking sound when lifting the clutch to the semi-linked position?

The reasons for the squeaking sound when lifting the clutch to the semi-linked position are: 1. The release bearing is lacking oil and making noise; 2. The release bearing is damaged and making noise; 3. The clearance between the intermediate pressure plate and the drive pins in a dual-disc clutch is too large; 4. The clearance between the driven plate hub key teeth and the shaft key teeth is too large; 5. The driven plate hub rivets are loose. The solutions for the squeaking sound when lifting the clutch to the semi-linked position are: 1. Slightly depress the clutch pedal, allowing the diaphragm spring to contact the release bearing. If a rustling sound is heard, it indicates noise from the release bearing. If the noise persists after lubrication, it means the bearing is worn, loose, or damaged and should be replaced; 2. Replace the pedal spring.
4
2
Share

What Causes Low Low Pressure and Normal High Pressure in a Car's Air Conditioning System?

Car air conditioning low pressure is low and high pressure is normal because: the refrigerant or the air conditioning pipeline is blocked. The solution is: check and unblock the pipelines in the air conditioning system, and then test the air conditioning pressure through a pressure test. Car air conditioning is the abbreviation of car air conditioning device, which is used to adjust and control the temperature, humidity, air cleanliness and air flow in the car compartment to a better state. The functions of car air conditioning are: 1. To provide a comfortable riding environment for passengers and reduce travel fatigue; 2. To create good working conditions for drivers and ensure driving safety. The working principle of car air conditioning is: the compressor compresses the refrigerant into a high-temperature and high-pressure liquid, which becomes a medium-temperature and low-pressure liquid after being cooled by the air conditioning radiator, and then becomes a low-temperature and low-pressure gas after being throttled by the expansion valve.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.