What are the gears of the Jetour X70 Plus?

1 Answers
DiRachel
07/29/25 11:33pm
Jetour X70 Plus automatic transmission gears include Park (P), Reverse (R), Neutral (N), and Drive (D). If it's a pure automatic transmission, there are also Low (L), 2nd gear, and 1st gear behind D. If it's a manual-automatic transmission, there is an M gear with '+' and '-' signs, meaning that after switching to M gear, you can shift up or down by pressing '+' or '-'. How to drive an automatic transmission car: The correct sequence for driving an automatic transmission car is to first ensure the gear is in N or P before starting the engine, and always remember to press the brake when starting. While driving, simply shift to D for normal driving. Shifting for steep slopes: When climbing a steep slope, you can shift to L gear, which stands for Low gear, automatically switching between 1st, 2nd, and 3rd gears based on different needs. '1' and '2' represent 1st gear and switching between 1st and 2nd gears, respectively. In short, L, 1, and 2 gears are only needed when climbing slopes.
Was this review help?
6
3
Share
More Forum Discussions

How to Turn on the Wiper of an Exam Car?

The method to activate the wiper of an exam car is to push the wiper control lever. By pushing the wiper control lever up or down, you can control the wiper's operation modes, which include intermittent, off, auto, and high/low speeds. When the adjustment knob is in the auto mode, you can adjust the sensitivity of the rain sensor by sliding the sensitivity adjustment switch left or right, thereby changing the wiper's frequency. Sometimes, you may also need to activate the windshield washer fluid switch while using the wiper. Simply pull the control lever lightly toward the driver to make both the windshield washer and wiper work simultaneously. If the wiper does not function, it is often due to a blown fuse, and replacing the burnt fuse will solve the issue.
9
2
Share

Is it acceptable not to affix temporary license plates on the glass?

It is not permissible to leave temporary license plates unaffixed on the glass. Temporary license plates must be adhered to the glass as required. Failure to properly affix temporary plates in accordance with regulations will result in penalties from traffic police under the provisions for intentionally obscuring, defacing, or failing to install vehicle license plates as prescribed, including fines and a deduction of 12 points. Temporary license plates come in two copies: one should be affixed to the lower left or right corner of the front windshield inside the vehicle in a position that does not obstruct the driver's view, and the other should be affixed to the lower left corner of the rear windshield inside the vehicle. Temporary plates are region-specific and time-limited, with different types serving different functions. If cross-province or cross-city travel is required, an inter-administrative district temporary license plate must be applied for.
8
5
Share

How to Handle a Car Tire Blowout on the Highway

Methods for handling a car tire blowout on the highway: 1. Do not slam on the brakes. After a blowout, drivers instinctively tend to brake, but in the case of a tire blowout, heavy braking can cause the vehicle to lose balance and veer out of control. Therefore, do not brake immediately after a blowout. 2. Do not immediately release your foot from the accelerator pedal. It is recommended to maintain some throttle for a short period before gradually easing off the accelerator. 3. Try to keep the vehicle moving straight. After a tire blowout, turning or jerking the steering wheel can destabilize the vehicle, causing it to veer to one side. If this happens, stay calm and counter-steer in the opposite direction of the veer to maintain straight-line movement and control the vehicle's motion.
10
2
Share

What are the symptoms of a car lacking engine oil?

A car lacking engine oil will experience insufficient power and excessive oil consumption. In severe cases, inadequate lubrication can lead to piston knocking, causing damage to engine components or even complete engine failure. If the vehicle is running low on oil while driving, it is essential to replenish the oil at the nearest auto repair shop or gas station to prevent further engine damage due to insufficient lubrication and ensure the safety of both the driver and the vehicle. The primary functions of engine oil include: 1. Lubrication: Engine oil forms a protective film between the piston and cylinder, reducing friction; 2. Sealing: The oil film prevents gas and oil leaks; 3. Cleaning: Engine oil circulates and carries away carbon deposits, sludge, and wear particles from engine components back to the oil pan; 4. Rust and corrosion prevention: The oil film on parts prevents contact with moisture and air, thereby protecting against rust and corrosion; 5. Cooling: Engine oil circulates and dissipates some of the heat generated by the engine.
7
0
Share

Differences Between China 5 and China 6 Emission Standards

The differences between China 5 and China 6 emission standards are: 1. Different control levels: The China 5 standard control level is equivalent to the European Stage 5 emission standard; the China 6 emission standard is established to prevent environmental pollution caused by exhaust emissions from compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health. 2. Different release dates: The China 5 standard was released in September 2013; the China 6 standard was released in June 2018. 3. Different issuing departments: The China 5 standard was issued by the Ministry of Environmental Protection; the China 6 emission standard was jointly issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection and Quarantine. 4. Different requirements: The emission standards for diesel and gasoline engine models under China 5 are different; China 6 adopts a fuel-neutral principle, meaning that regardless of the fuel type, the emission limits are the same.
3
3
Share

What engine does the Changan Kuayue V3 use?

Changan Kuayue V3 uses a 1.2-liter four-cylinder naturally aspirated engine. The dimensions of the Changan Kuayue V3 are 3995mm in length, 1645mm in width, and 1910mm in height, with a wheelbase of 2605mm. The drivetrain configuration is mid-engine rear-wheel drive. The front suspension of this vehicle employs MacPherson independent suspension, while the rear suspension uses leaf spring non-independent suspension. The 1.2-liter four-cylinder naturally aspirated engine used in this car delivers 88 horsepower with a maximum torque of 115 Nm. The engine's maximum power is achieved at 6000 rpm, and the maximum torque is reached at 4400 rpm. This engine is equipped with multi-point fuel injection technology and features an aluminum cylinder head and block.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.