What are the gear requirements when passing through school zones in Subject 3?

3 Answers
Braxton
07/28/25 6:33pm
In the Subject 3 driving test, the vehicle speed must be below 30km/h before encountering a school zone, below 30km/h before entering a pedestrian crossing, and below 30km/h when passing through an intersection, with the gear in 2nd. The Subject 3 test consists of the road driving skills test and the safety and civilized driving knowledge test, which are part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safety and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies for different types of vehicles eligible for driving. Additional information is as follows: 1. Road driving skills test content: vehicle preparation, simulated lighting test, starting, driving in a straight line, gear shifting operations, lane changing, parking by the roadside, driving straight through intersections, turning left at intersections, turning right at intersections, passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving. 2. Safety and civilized driving knowledge test content: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and post-accident handling knowledge.
Was this review help?
9
0
Share
SanMackenzie
08/11/25 10:30pm
I paid special attention to this issue when taking my driver's license test. The speed limit in school zones is 30 km/h, so using 1st or 2nd gear is the safest. During practice, my instructor repeatedly emphasized: when you see the school zone sign, you must start slowing down 30 meters in advance, reducing speed to around 20-25 km/h, while shifting down to 2nd gear to pass through at a steady speed. During the entire test, you absolutely must not exceed the speed limit or use 3rd gear, otherwise you'll fail immediately. Also, remember to make your observation movements obvious, but don't turn your head too much. Once when I was accompanying a friend during practice, he forgot to slow down in advance and braked sharply right at the sign, causing the car to shake too violently and the system judged it as unqualified. I recommend familiarizing yourself with the test route, knowing where the school zones are located so you can prepare for gear changes in advance.
Was this review help?
17
1
Share
Expand All
JosieFitz
09/30/25 4:01am
After teaching driving lessons for ten years, I've found that many students fail the exam in school zones. The key points are threefold: First, the gear must be kept between 1st and 2nd; using 3rd gear during the test results in an immediate 100-point deduction. Second, start easing off the throttle and smoothly downshift when you spot the blue school sign from 30 meters away. Third, the speed must remain under 30 km/h—even 1 km/h over on the dial is unacceptable. Don't just focus on the dashboard; simultaneously perform clear left-right head checks. Last week, a student was penalized by the examiner for staring at the speedometer too long after downshifting, failing to observe the road. Truthfully, this section tests safety awareness—control your speed and gears properly, add in the observation movements, and you'll rarely make mistakes.
Was this review help?
11
4
Share
Expand All
More Forum Discussions

What is the function of a car air conditioning filter?

The main functions of a car air conditioning filter are: 1. Provide fresh air. It prevents the car windows from fogging up, ensuring clear visibility for the driver and safe driving; it supplies fresh air to the passenger compartment, preventing occupants from inhaling harmful gases and ensuring driving safety; it effectively sterilizes and deodorizes. 2. Ensure safety and hygiene. It keeps the air in the passenger compartment clean and free from bacterial growth, creating a healthy environment; it effectively separates solid impurities such as dust, core powder, and grinding particles from the air; it efficiently intercepts pollen, ensuring that passengers do not suffer allergic reactions that could affect driving safety. 3. Adsorb harmful substances. It adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air; it has strong and durable moisture adsorption capabilities. 4. Filter solid impurities. The car air conditioning filter fits tightly into the housing, ensuring that unfiltered air does not enter the cabin. It separates solid impurities such as dust, pollen, and grinding particles from the air.
18
1
Share

What to Do If Your Car Fails the Environmental Protection Test?

If your vehicle fails the environmental protection test three times, the first consideration should be whether there is an issue with the catalytic converter. Car exhaust contains many pollutants, with the primary ones being carbon monoxide, hydrocarbons, and nitrogen oxides. Under normal circumstances, the catalytic converter processes these through oxidation and reduction, converting them into harmless carbon dioxide, nitrogen, and water, thereby achieving purification. The catalytic converter is called a "three-way" catalytic converter because it contains three precious metals: platinum (Pt), rhodium (Rh), and palladium (Pd), hence the name "three-way." Solution: Before the test, drive on the highway for a while to allow the catalytic converter to reach its optimal operating temperature before testing. The most important point is not to turn off the engine before the test, as this keeps the catalytic converter at a certain temperature. If this still doesn't work, directly clean the catalytic converter and then retest to see if it passes. If it still fails, consider the following possible reasons: 1. The oxygen sensor is faulty. Solution: Replace the oxygen sensor. 2. The air filter is problematic. Solution: Replace the air filter. 3. The fuel is the issue. Solution: Add half a tank of E10 ethanol gasoline. Ethanol has a high oxygen content, which aids combustion. If none of these methods work, there is basically no other solution.
9
4
Share

What is the one-touch window operation for the Verano?

Operation method for the Verano's one-touch windows: 1. To open the window, press the switch to the first position and hold until the window moves to the desired position, then press slightly harder to the second position, and the window will automatically lower; 2. To close the window, pull the switch to the first position and hold until the window moves to the desired position, then briefly pull the switch to the second position, and the window will automatically close. The Buick Verano is a new compact model from Buick, positioned above the Excelle. In terms of body dimensions, it measures 4718mm in length, 1802mm in width, 1466mm in height, with a wheelbase of 2700mm.
1
3
Share

Which vehicles are included in the rural auto promotion program?

The rural auto promotion program generally does not include models such as sedans, SUVs, or MPVs. Only minibuses, light trucks, and motorcycles are covered. The rural auto promotion is a pro-farmer policy proposed by the State Council in 2009, which not only meets the needs of benefiting and strengthening agriculture but also serves as an important measure to stimulate consumption and production. The rural auto promotion not only provides farmers with rural household registration preferential purchase subsidies and tax reductions but also stimulates economic consumption to a certain extent and revitalizes the automotive industry. For example, the Chengdu Wanyou is a vehicle with high ground clearance, low fuel consumption, high quality, low price, and strong load capacity, making it suitable for regional markets. In terms of engine usage, this vehicle is equipped with the 4L88 engine, a brand-new product jointly developed by Changchai and Great Wall, with a displacement of 2.8 liters and a power output of 65kW. It also comes with a PM injection pump and Bosch P injectors from Germany. The engine's fuel consumption rate is significantly reduced, with fuel consumption below 6 liters per 100 kilometers, showcasing outstanding fuel-saving performance. Chengdu Daxingda Auto: Excellent fuel-saving performance, leading in vehicle length and space volume among similar models. Utilizing the latest technology, it achieves excellent fuel-saving performance with a fuel consumption of only 6.25-6.5L per 100 kilometers. Meanwhile, the vehicle length is 3.868 meters, width is 1.528 meters, and height is 1.848 meters.
19
0
Share

How to Smooth Out After Applying Touch-Up Paint Pen?

Methods for smoothing out after applying a touch-up paint pen are as follows: 1. Smoothing with wet sandpaper. You can use 2000-grit wet sandpaper for sanding. After the touch-up paint has dried, soak the wet sandpaper in soapy water for 20-30 minutes to make it softer, then sand the uneven paint surface until the thickness of the touch-up matches that of the original factory paint. 2. Smoothing with toothpaste. Toothpaste can serve as a mild abrasive. First, squeeze toothpaste onto a soft, clean towel or sponge, then gently rub the uneven areas until the touch-up paint thickness is level with the original factory paint. 3. For better results, you can also use polishing compound for finishing.
13
0
Share

Severe Vibration in Three-Cylinder Engines After Three Years?

Three-cylinder engines vibrate because the moment of inertia cannot ensure balance, leading to jolting. The invention of three-cylinder engines primarily aligns with the trend toward smaller-displacement automotive engines, and today's three-cylinder engine technology has reached a mature stage. The main advantage of three-cylinder engines is their low fuel consumption. Due to their structural benefits, three-cylinder engines excel in fuel consumption control. Engine miniaturization results in a smaller size, higher power density, and improved thermal efficiency. Structural factors also contribute to lower pumping losses in three-cylinder engines. The smaller cylinder block reduces friction losses during operation, and correspondingly, heat dissipation losses are minimized. Powerful performance: Within the 1.0L-1.5L displacement range, three-cylinder engines have fewer cylinders than four-cylinder engines, resulting in larger single-cylinder volume for the same displacement, which delivers better low-speed power. Fewer cylinders mean less mechanical friction, while more cylinders reduce single-cylinder efficiency. Three-cylinder engines exhibit faster dynamic response and stronger performance compared to four-cylinder engines. Reduced turbo lag: Three-cylinder engines experience less exhaust interference than four-cylinder engines. With small-inertia turbo technology, three-cylinder engines achieve better low-end torque and less turbo lag than four-cylinder engines. Compact size and lightweight. Three-cylinder engines are compact and lightweight, which helps reduce overall vehicle weight. Their smaller dimensions also save space in the engine compartment, providing room for electrified components.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.