What are the functions of Volkswagen's multifunctional dashboard?

What is the actual 0-100 km/h acceleration time of the Audi S4?

According to official data, the Audi S4 comes with a 3.0T engine and achieves a 0-100 km/h acceleration time of 9.1 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time include: Torque: Torque, in simple terms, represents the amount of force available. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. For example, the BMW 320i has a maximum torque of 205 Nm and a 0-100 km/h acceleration time of 9 seconds. In contrast, the Audi S4 boasts 500 Nm of torque and accelerates from 0-100 km/h in just 4.7 seconds. Transmission efficiency: The transmission acts as the medium for power delivery and inevitably involves power loss. Higher transmission efficiency leads to better acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Audi S4 is equipped with a Tiptronic automatic transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is known as the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. For instance, the BMW 320i has a power-to-weight ratio of 106 Hp/T and a 0-100 km/h acceleration time of 9 seconds. The Audi S4, with a power-to-weight ratio of 199 Hp/T, achieves 0-100 km/h in 4.7 seconds.

4

Share

How to Set the Time on a Trumpchi GS4 Car?

Trumpchi GS4 time adjustment method: Click the SET button on the right side of the panel to enter the settings, then rotate the SEL button to find the clock option, and click SEL to adjust it. Below is a related introduction to the Trumpchi GS4: 1. The Trumpchi GS4 has an outstanding appearance, with a bold and imposing front face design, dynamic and smooth when moving, and majestic when stationary. 2. In terms of interior, the floating 360° surround-style layout features a wing-inspired horizontal design pattern. Piano black lacquer decorative elements extend elegantly to the doors, while the sculptural and tech-inspired surround trim runs through the front cabin, stimulating the driver's desire to drive. The hexagonal buttons, reminiscent of Italian supercar style, arrange the screen, elongated buttons, and bottom buttons in an orderly layout, complemented by exquisite chrome decorations, creating a refined and delightful visual experience. 3. The Trumpchi GS4 offers a spacious and flat interior, meeting diverse storage needs and lifestyle requirements.

2

Share

Where is the air conditioning filter of Zotye SR9 located?

Zotye SR9's air conditioning filter is located inside the glove compartment on the passenger side. Release the side clips and lower the glove compartment to see the air conditioning filter panel. Open the glove compartment on the passenger side, and there is a pull rod on the right side. Pull it out with force. Here is some relevant information about when to replace the air conditioning filter: 1. If the airflow from the air conditioner is significantly reduced, the air conditioning filter may be clogged. First, clean the filter or replace it if necessary. 2. The frequency of cleaning depends on road conditions (such as dusty roads, etc.), and it is recommended to clean it earlier. 3. In cities with poor air quality, it is recommended that car owners replace the air conditioning filter twice a year to ensure health.

2

1

Share

What is the normal tire pressure range for a Buick Excelle?

The factory-recommended tire pressure standard for the Buick Excelle is 2.3-2.5. The maximum should not exceed 3.0, and the minimum should not be lower than 2.1, both of which fall within the normal range. Below is some knowledge related to tire pressure: 1. The standard tire pressure is usually indicated on the driver's side door or door frame. It's important to note that pressure can be expressed in different standard units, typically 3-4 types. Just as weight can be measured in kilograms or jin, tire pressure gauges also display 3-4 different units, such as kg/cm2, bar, PSI, and kpa. 2. The conversion relationship between these units is: 1bar=1.02kg/cm2=102kpa=14.5PSI. Car owners don't need to worry about how to calculate this; they just need to observe where the pointer on the pressure gauge points, note the unit used, and then check the vehicle's corresponding standard pressure value in that unit. 3. Nowadays, many tires are not filled with air. For these tires, the pressure requirements are more stringent. For tires filled with air, the pressure may vary with seasonal changes. Moreover, tire pressure is closely related to vehicle performance, such as comfort and load capacity, and can also affect tire lifespan. 4. Pressure is the lifeblood of tires; both excessive and insufficient pressure will shorten the tire's service life. Insufficient pressure increases tire body deformation, making the sidewalls prone to cracks and causing bending movements, leading to excessive heat, rubber aging, fatigue in the cord layer, and cord breakage. It also increases the tire's contact area with the ground, accelerating shoulder wear. Excessive pressure causes excessive stretching and deformation of the tire cords, reducing the tire body's elasticity and increasing the load on the vehicle while driving. In case of impact, it may cause internal cracks and bursts. Additionally, excessive pressure accelerates tread wear and reduces puncture resistance.

15

4

Share

What car has an L logo?

The car with an L logo is Lexus, which is an automobile brand under the Japanese Toyota Group. The main models of Lexus include: LM, UX300e, ES, RX, NX, UX, CT, LS, LC, LY650, and LX. Taking the Lexus RX as an example: its exterior dimensions are 4890mm in length, 1895mm in width, and 1710mm in height, with a wheelbase of 2790mm and a fuel tank capacity of 72.5 liters. The Lexus RX uses a MacPherson strut front suspension and a double-wishbone rear suspension, with tire specifications of 235/65R18.

18

0

Share

What are the steps for changing brake fluid?

Steps for changing brake fluid: 1. Ensure the vehicle is turned off and open the brake fluid reservoir cap. Use a syringe to extract all the old brake fluid; 2. Pour new brake fluid into the reservoir; 3. Use a lift to raise the car from the bottom; 4. Locate the brake caliper's bleed screw and remove the dust cap from the bleed nipple; 5. Use a wrench to loosen the bleed screw and attach a rubber tube to it. Pay attention to the color of the brake fluid in the rubber tube. If the color remains dark, it indicates that the old brake fluid hasn't been fully drained. If the color is lighter, it means the tire has completed the fluid change. Stop pressing the brake pedal and reinstall the screw and dust cap.

3

5

Share

What are the functions of Volkswagen's multifunctional dashboard?

What is the actual 0-100 km/h acceleration time of the Audi S4?

How to Set the Time on a Trumpchi GS4 Car?

Where is the air conditioning filter of Zotye SR9 located?

What is the normal tire pressure range for a Buick Excelle?

What car has an L logo?

What are the steps for changing brake fluid?

What car is the X logo?

How to Use Cruise Control in the Old Lavida?

Where is the battery located in an Audi A4?

How to Engage Four-Wheel Drive in a Jeep Wrangler?