What Are the Functions of Transmission Fluid?

Where is the OBD interface located on the Lifan Letu?

The OBD interface of the Lifan Letu is located in front of the front passenger seat, under the toolbox, and next to the blower. Below are the specific details about the Lifan Letu: 1. Body dimensions: The Letu series has dimensions of 4350×1730×1800 (mm) with a wheelbase of 2720mm. In terms of interior space, a 173cm tall tester has over two fists of headroom in the front and middle rows, and about one fist in the last row. Legroom is approximately one fist and three fingers in the second row and about one fist in the third row. 2. Powertrain: The Letu offers two naturally aspirated engine options: a 1.2L and a 1.5L, with maximum power outputs of 62kW and 80kW, and maximum torque of 108Nm and 145Nm, respectively. The engines are paired with a 5-speed manual transmission. 3. Color options: The Letu is available in six colors: Emerald Black, Mystic Black, Tungsten Gray, Corundum Brown, Coral Red, and Pearl White.

5

Share

What type of vehicle is the Dongfeng Peugeot 3008?

Peugeot 3008 is a compact SUV. Below are the relevant details of the Peugeot 3008: 1. Body design: Its unique body design combines the height of an SUV with the length of an MPV, making it more aligned with Chinese aesthetic preferences. It features sharp and dynamic lines, a relatively bold exterior, and increased body dimensions in length, width, and height while maintaining the same wheelbase. 2. Interior features: It comes equipped with cruise control, vehicle stability system, HAC hill-start assist system, and an electronic parking brake. Mid-range and high-end models also include cruise control, automatic dual-zone air conditioning, front seat heating, and six airbags. 3. Powertrain: There are two engine options available for consumers. One is a 2.0L naturally aspirated engine with a maximum power output of 147 horsepower and a maximum torque of 200N·m. The other is a 1.6L turbocharged engine with a maximum power output of 163 horsepower and a maximum torque of 240N·m. In terms of transmission, the domestic 3008 2.0L models are equipped with a 5MT or 6AT transmission, while the 1.6T models come with a 6AT transmission.

18

3

Share

Do car owners need to go together when the 4S shop handles the license plate?

Car owners do not need to go together when the 4S shop handles the license plate, only providing the ID card is required. To apply for a new car license plate, you need to go to the local vehicle management office, and the required documents include ID card, vehicle certificate, vehicle parameter table, the second and fourth copies of the car invoice, vehicle purchase tax, and compulsory insurance of the car. The following are the precautions for car license plate application: 1. Determine the type of license plate to be applied: After determining whether to apply for a local license plate or an out-of-town license plate, pay the purchase tax according to the regulations. The vehicle purchase tax should be paid in the vehicle's registered location. If you choose a local license plate, you must pay the purchase tax locally. If you choose an out-of-town license plate, you must pay the purchase tax out of town. 2. Fully understand relevant information: Before purchasing a new energy vehicle, you must determine whether a charging pile can be installed and understand relevant information. You must also understand important information such as the application process for special license plate quotas and financial subsidy standards.

1

5

Share

What are the reasons for the sudden increase in fuel consumption of Volkswagen Bora?

Volkswagen Bora's sudden increase in fuel consumption may be caused by engine carbon deposits, spark plug failure, abnormal tire pressure, and other reasons. Engine carbon deposits: During long-term operation of the vehicle, gasoline inevitably produces carbon deposits and sludge during combustion. If these sludge and carbon deposits are not cleaned in time, they will lead to an increase in car fuel consumption. It is necessary to clean the engine carbon deposits. Spark plug failure: The function of the car spark plug is to use high-voltage electricity to generate sparks to ignite the mixed gas. If damaged, it will reduce the ignition energy, causing uneven combustion of the mixed gas, which will lead to slower vehicle acceleration and increased fuel consumption. Replace the spark plug or clean the carbon deposits on the spark plug. Abnormal tire pressure: Abnormal tire pressure can also affect the car's fuel consumption. When the tire pressure is too low or the tire tread is severely worn, the contact area between the tire and the road surface increases, friction increases, rolling resistance increases, and fuel consumption naturally rises. Check the tire pressure and replenish it in time.

16

5

Share

How to switch the display on JH6 instrument panel?

Click on Hardware and Sound under the Control Panel, or click on Appearance and Personalization to switch and adjust. Click on Display, then locate and adjust the brightness slider in the illustration. Below are relevant details about the FAW JH6: 1. Weight: The FAW JH6 weighs 6.805 tons, with suspension options including multi-leaf springs, fewer-leaf springs, and air suspension for the drive axle. The use of fewer-leaf springs and air suspension can reduce the overall vehicle weight, freeing up more cargo capacity. This truck targets the long-haul transportation market, emphasizing lightweight design and time efficiency. To further enhance the vehicle's operating range and mileage, the manufacturer offers optional dual fuel tanks and dual fuel filler ports. 2. Design: The entire cab features a three-layer shock absorption design from inside to outside and bottom to top. Vibrations are filtered layer by layer, ensuring minimal noticeable vibration for the driver, resulting in a very comfortable experience. The JH6 Excellence Edition adopts a four-point air suspension design, further improving the cab's shock absorption performance. The driver's seat uses airbag shock absorption and supports six adjustment functions: tilt angle, height, back support, lumbar support, fore-aft movement, and backrest adjustment.

7

5

Share

What are the differences between Tesla V3 and V2?

Tesla V3 and V2 have the following differences: 1. Faster charging speed: In May 2019, to meet market demands, Tesla increased the maximum peak power of V2 Superchargers from 120kW to 145kW, further improving charging speed. However, compared to V3 Superchargers with a maximum peak power of 250kW, the charging speed of electric vehicles using V2 Superchargers is significantly slower. 2. Lighter and more flexible: To facilitate use by female owners with less strength, Tesla redesigned the charging gun for V3 Superchargers. By adopting liquid-cooled cables, the diameter of the cable was reduced from 36.3mm in V2 to 23.87mm, making it easier for owners to plug and unplug the charging gun. 3. Added new features: V3 Superchargers come with a new feature called 'On-Route Battery Warm-Up.' During the journey to a V3 Supercharger using the vehicle's navigation, the car will automatically preheat the battery to ensure it reaches the ideal charging temperature at the start of the charging process. According to Tesla's calculations, the combination of V3 Superchargers and the preheating function can ultimately reduce the average user's charging time by 50%.

9

5

Share

What Are the Functions of Transmission Fluid?

Where is the OBD interface located on the Lifan Letu?

What type of vehicle is the Dongfeng Peugeot 3008?

Do car owners need to go together when the 4S shop handles the license plate?

What are the reasons for the sudden increase in fuel consumption of Volkswagen Bora?

How to switch the display on JH6 instrument panel?

What are the differences between Tesla V3 and V2?

How much is the speeding if driving at 75 in a 50 speed limit zone?

How many cylinders does the Haval H9 have?

How to Handle the Deduction of 12 Points on an A2 Driving License?

How to Use the L2 Autonomous Driving Function in the Leiling?