What are the functions of the Wuling Hongguang center console buttons?

1 Answers
GenesisDella
09/07/25 8:21am
The buttons on the Wuling Hongguang center console are for volume adjustment, navigation, hazard warning lights, SD card slot, channel selection, answering calls, ending calls, HOME button, and back button. Below is a related introduction to car switch buttons: Light buttons: Vehicles need to turn on different lights in different situations, mainly including low and high beams, fog lights, and marker lights. Air conditioning buttons: Summer and winter temperatures are extreme, and air conditioning can improve the comfort of drivers and passengers. Wiper buttons: Wipers are commonly used on rainy days, and they are also needed when the front windshield is dirty. Front and rear cover buttons: The front engine hood is opened less frequently, only during maintenance and repairs, while the trunk is used more often. ESP (Electronic Stability Program) button: During rain or snow, the car is prone to skidding while driving, and this function can improve body stability.
Was this review help?
12
1
Share
More Forum Discussions

What is the difference between a four-piece set and a six-piece set?

The difference between a four-piece set and a six-piece set lies in the components they include. The engine four-piece set consists of: piston, piston pin, piston rings, and cylinder liner. The engine six-piece set includes: connecting rod, piston, piston rings, cylinder liner, main bearing, and connecting rod bearing. Four-piece set: Its purpose is to provide convenience for users when purchasing parts for diesel engine repairs. If there is no cylinder liner, it is referred to as a piston assembly. Six-piece set: These are the moving components of the engine, working in conjunction with the fuel system and valve train. They complete the engine's intake, compression, combustion power, and exhaust strokes, converting chemical energy into mechanical energy to output power. Because they endure significant mechanical and thermal loads, they are the most critical and most prone to failure components in the engine.
6
5
Share

What do the three attributes of ETS2 tires refer to?

ETS2 tires' three attributes refer to the 3T markings, which are the treadwear index, traction index, and temperature index. Introduction to 3T markings: These three index levels indicate the degree of wear resistance, traction, and high-temperature resistance respectively. The treadwear index reflects the tire's wear resistance—the higher the value, the more wear-resistant the tire is, but the harder the rubber becomes, resulting in poorer comfort. Conversely, a lower value indicates less wear resistance, softer rubber, and better comfort. CCC marking: In addition to paying attention to the 3T markings, you should also check for the CCC marking on the sidewall of passenger car tires. If this marking is absent, it means the tire has not obtained the mandatory national certification and is unsuitable for domestic road conditions. This is especially important when purchasing imported passenger car tires, as the absence of this marking can severely affect normal usage.
5
1
Share

Is the Right Turn Signal Up or Down?

Right turn signals are activated by moving the lever upward, while left turn signals are activated by moving it downward. Generally, turning the signal lever upward (clockwise) indicates a right turn, and turning it downward (counterclockwise) indicates a left turn. This design aligns with human intuition and operational thinking. How to use turn signals: Push the turn signal lever upward to activate the right turn signal; push it downward to activate the left turn signal. Purpose of turn signals: To alert pedestrians or other vehicles of the intended turning direction; to indicate overtaking or lane-changing direction; when both left and right turn signals are activated simultaneously, it indicates an emergency situation to warn other vehicles. Precautions for using turn signals: Activate the turn signal in advance before making a turn; use the left turn signal when overtaking and the right turn signal when returning to the original lane; when activating the turn signal, observe pedestrians and surrounding vehicles before performing any maneuvers.
4
2
Share

How to Adjust When the Car Body is Too Far from the Side Line?

In China, the driver's seat is on the left side, so drivers have a better grasp of the situation on the left. While driving, one should consciously stay closer to the left side because there are more blind spots on the right. Generally, the width of urban roads is 3.5 meters, while the width of an average small car is 1.6 meters, so 3.5M - 1.8M = 1.7M. When measuring the distance between the car body and the right side line, one must also consider the height of the curb and the traffic conditions of that road section. Maintaining a normal sitting posture, looking outward, the extension line of the right side line should just intersect with the convex and concave points of the vehicle's wiper. At this point, the distance between the car body and the right side line is approximately 30CM.
10
4
Share

Where is the Vehicle Annual Inspection Location in Kunshan?

At the Kunjia Road Vehicle Management Office, Chengbei Zhongbiao, and beside the Zhangpu Wusongjiang Bridge. Below is relevant information about vehicle annual inspections: Time: For passenger cars and blue-license minivans, new vehicles require inspection every two years for the first six years after registration; after six years, annual inspection is required; after ten years, inspection is required once a year, and after fifteen years, twice a year. For trucks, annual inspection is required after registration, and after ten years, inspection is required twice a year. Regulations: If a vehicle is found by traffic police on the road without an annual inspection, the owner may be fined or the vehicle may be impounded. Additionally, in insurance contracts, vehicles that have not undergone timely annual inspections are considered unqualified, and no claims will be paid in the event of an accident.
13
2
Share

Is the Image in the Rearview Mirror Laterally Inverted?

Rearview mirrors display a laterally inverted image. Definition: A rearview mirror is a device that allows drivers seated in the driver's seat to directly obtain external information about the rear, sides, and lower areas of the vehicle. For the convenience of drivers, to prevent traffic safety accidents, and to ensure personal safety, all countries mandate the installation of rearview mirrors on vehicles, and all rearview mirrors must be adjustable in direction. Classification: Rearview mirrors can be divided into three main series: flat mirrors, spherical mirrors, and dual-curvature mirrors. Additionally, there is a prismatic mirror type, which has a flat mirror surface but a prism-shaped cross-section, typically used as an anti-glare interior rearview mirror.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.