What are the functions of the Volkswagen Phideon steering wheel?

1 Answers
Saul
07/29/25 11:34am
On the left side of the Volkswagen Phideon steering wheel, there are cruise control buttons: SET to set speed, CNL to cancel cruise, RES to resume cruise, volume adjustment buttons, and the cruise control switch button. The right side buttons control multimedia and Bluetooth calls, menu switching, option switching, Bluetooth calls, voice control, and the confirm button. Correct hand positions for steering: Turning the steering wheel one full turn is 360 degrees, and a quarter turn is 90 degrees. You can think of the steering wheel as a clock. The correct hand positions are left hand near the 9 o'clock position and right hand near the 3 o'clock position. To turn 90 degrees, turn the wheel one full turn plus a quarter turn. Steering techniques: Beginners practicing steering don't need to worry about exactly how many degrees to turn the wheel. Just follow the principle of 'turn as much as needed, return as much as turned, small turns small returns, slow turns slow returns, large turns large returns, quick turns quick returns.' As for how much to turn, you can judge by the steering wheel markings or adjust based on the direction of the car's front and body.
Was this review help?
18
0
Share
More Forum Discussions

How to recline the seats in the Koleos?

To recline the seats in the Koleos, adjust the backrest angle by pulling it forward or backward. Pushing forward tilts it forward, while pulling backward tilts it backward. To lower the headrest, press the adjustment button located next to the two support rods of the headrest or on the side of the headrest, then pull the headrest up or down. To adjust the seat height: 1. Locate the height adjustment lever on the driver's seat. 2. Lift the lever to adjust the seat height. To clean the seats: 1. Spray an appropriate amount of leather cleaner onto the leather seats, covering the surface. 2. Wait for 3 to 5 minutes to allow the cleaner to dissolve stains thoroughly. 3. Wipe off the stains and cleaner with a soft, dry cloth. To maintain the car seats: 1. Remove protective plastic bags promptly. 2. Install a suitable seat cover or cushion. 3. Wipe the seats regularly. 4. Dust the seats frequently. 5. Keep seats away from heat sources. 6. Avoid exposing seats to direct sunlight.
15
4
Share

What brand of transmission oil does the Corolla use?

Corolla uses Toyota Genuine ATF WS transmission oil. Symptoms of not changing the transmission oil include: 1. Decreased power - the vehicle responds sluggishly during acceleration with noticeable engine noise but no corresponding speed increase; 2. Difficult starts - at low gears, the engine revs up when accelerating but the vehicle covers less distance; 3. Transmission damage - overheating may occur, damaging bearings and gears; 4. Gearshift issues - jerky shifting, rough transitions, and unusual noises from the transmission. The transmission consists of gear transmission mechanisms and control mechanisms, whose function is to alter the speed and torque from the engine, either fixing or changing the gear ratio between the output and input shafts.
14
3
Share

What are the icons for air recirculation and fresh air mode respectively?

The icons for air recirculation and fresh air mode are: 1. The air recirculation icon features a car symbol with an arrow circulating inside the vehicle; 2. The fresh air mode icon shows a car symbol with an arrow pointing from outside to inside. The functions of car air conditioning include: 1. Cooling, heating, ventilating, and purifying the air inside the vehicle; 2. Providing a comfortable environment for passengers, reducing driver fatigue, and enhancing driving safety. Maintenance methods for car air conditioning: 1. Clean the air vents promptly; 2. Maintain the air conditioning condenser in a timely manner; 3. Clean or replace the air filter regularly. Proper usage of air conditioning: 1. Turn off the air conditioning when driving at low speeds; 2. Avoid smoking when the air conditioning is on inside the car; 3. Turn off the engine before switching off the air conditioning; 4. Activate recirculation mode immediately upon entering the car in summer.
1
3
Share

How to Remove the Compressor on a Land Rover Range Rover Diesel Version?

The steps to remove the compressor on a Land Rover Range Rover diesel version are: 1. Disconnect the oil pipe and flange; 2. Remove the spring, oil cylinder, oil piston, and pull rod as a complete set. The function of the compressor is to regulate the start-stop state of the air compressor, allowing the air compressor to shut down and rest by adjusting the pressure in the air storage tank, which has a maintenance effect on the engine. The working principle of the compressor: it draws the refrigerant from the low-pressure area, compresses it, and sends it to the high-pressure area for cooling and condensation. The heat is dissipated into the air through the radiator, and the refrigerant changes from a gaseous state to a liquid state, with increased pressure. Taking the 2021 Land Rover Range Rover Sport as an example, it belongs to the mid-to-large SUV category, with body dimensions of: length 4879mm, width 2073mm, height 1803mm, a wheelbase of 2923mm, and a fuel tank capacity of 104.3l. The 2021 Land Rover Range Rover Sport features a front suspension with a double-wishbone independent suspension and a rear suspension with a multi-link independent suspension. It is equipped with a 3.0L mechanical turbocharged engine, delivering a maximum horsepower of 360PS, a maximum power of 265kW, and a maximum torque of 495Nm, paired with an 8-speed automatic transmission.
13
0
Share

How to Use the Vehicle's Internet of Vehicles (IoV)?

The method to use the vehicle's Internet of Vehicles (IoV) is as follows: 1. Open WeChat on your mobile phone; 2. Click on the 'Scan' option in the top-right menu of WeChat; 3. Scan the QR code displayed on the vehicle's infotainment screen; 4. Follow the account and follow the prompts to bind and connect your vehicle. The Internet of Vehicles (IoV) is a vast interactive network composed of vehicle location, speed, route, and other information. Through mobile internet, it enables the collection and sharing of vehicle information, facilitating communication between vehicles and roads, vehicles and owners, owners and owners, and owners and third-party service providers via information processing.
4
4
Share

What happens if you accidentally shift to N gear while driving an automatic transmission car?

Accidentally shifting to N gear while driving an automatic transmission car once or twice is generally fine, but prolonged use can damage the transmission. The correct parking procedure for an automatic transmission car is: 1. Press the brake pedal and shift to N gear; 2. Engage the handbrake, then shift to P gear; 3. Release the brake pedal and turn the key to shut off the engine. Precautions for shifting gears in an automatic transmission car: 1. Do not press the accelerator pedal when shifting gears; 2. Do not immediately press the accelerator pedal hard after shifting gears; 3. The vehicle can only be started in P or N gear; 4. To move the gear lever out of P gear, you must press the brake pedal; 5. Do not shift to N gear while driving to coast; 6. Do not push into P gear while the vehicle is moving; 7. When changing direction, switch between D and R gears only after the vehicle has come to a complete stop; 8. Shifting to N gear while driving prevents the oil pump from supplying oil normally for lubrication, which can cause the internal components of the transmission to overheat and result in damage.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.