What are the functions of the three buttons on the Honda CR-V key?

1 Answers
LeAutumn
07/28/25 7:18pm
Honda CR-V key has three buttons: lock, remote start, and unlock. Pressing the lock or unlock button will lock or unlock all doors: When the lock or unlock button on the remote is pressed, all doors and the tailgate will lock or unlock. If the doors are not opened within 30 seconds after unlocking via the remote transmitter, they will automatically relock. Carrying the key within 80cm of the door allows direct door opening: When carrying the smart key remote, you can directly open the doors without pressing the unlock button within an 80cm radius of the door handle. The door lock/unlock indicator lights will flash: When the doors are locked or unlocked, all exterior turn signal lights and two indicator lights on the instrument panel will flash.
Was this review help?
10
2
Share
More Forum Discussions

How to Activate the Hidden Features of Kia K2?

To activate the hidden features of Kia K2, you need to visit a modification shop or a 4S store and have the staff perform the operation and refresh. Alternatively, if you want to try it yourself, you can purchase an OBD upgrade tool capable of unlocking hidden features. More extended information is as follows: 1. Hidden Features of Kia K2 Remote Key: For example, closing the windows after turning off the engine. This allows you to close the windows with the remote key if you forget to do so after locking the car, which is very convenient. There is also a child safety lock, which locks the doors so they cannot be opened from the inside, but can be opened from the outside with a simple pull, making it easy to care for children at any time. The remote key can also be used to open the trunk remotely. Additionally, the remote key can remotely open the windows. 2. Car Hidden Feature Activation (Specifically ECU): The ECU is the control unit of the car's computer, a smart computer program that controls the engine's operation, mainly managing the intake air volume, fuel injection volume, and ignition timing. These three data indicators directly affect the engine's transmission power, torque, and operational efficiency.
6
2
Share

How to enable CarPlay in Audi A5?

Open Settings, General, and locate CarPlay; after opening, you can choose to connect via USB cable or Bluetooth. Then activate the vehicle's CarPlay system and connect it to your phone using the USB cable. After that, click "Allow MyLink" and make sure to enable Sire simultaneously.
6
0
Share

Why does the car shake at 40-60 km/h?

If the steering wheel shakes, there could be many factors, but the most common issue is related to the car's brake discs. It is recommended to contact the maintenance department at the sales point to replace both the brake pads and brake discs in a timely manner. Remember, both must be replaced together; replacing only one will not solve the problem. More details are as follows: 1. Common causes: Slight shaking in a car is normal, but if the shaking is severe, it is necessary to check the engine and chassis conditions. The most common cause of car shaking is a dirty throttle body or excessive carbon deposits on the fuel injectors. 2. Excessive carbon deposits causing shaking: When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold start injector will be largely absorbed by the carbon deposits, resulting in a lean mixture during cold starts and making it difficult to start. In this situation, the car will only start easily once the carbon deposits have absorbed enough gasoline to become saturated. After starting, the gasoline adsorbed on the carbon deposits will be sucked into the cylinder by the engine's vacuum suction force and burned, making the mixture too rich. This alternation between lean and rich combustible mixtures causes the engine to idle roughly after a cold start.
3
0
Share

How to Turn Off the Interior Lights in a Trumpchi?

The light control switch for the Trumpchi GS8 is located on the control lever to the left of the steering wheel. To turn off all the vehicle lights, rotate the gear to the OFF position. If you only want to turn off the high beams, lift the control lever towards the driver to return to normal mode, which will turn off the high beams.
16
0
Share

What is the method to reset the maintenance light on the 2020 WEY VV5?

Press the "Trip Reset" button on the dashboard lightly, and the trip meter will reset. Then press and hold the "Trip Reset" button for 60 seconds. At this point, the dashboard display will show 5000 kilometers, indicating that the maintenance reset is complete.
16
4
Share

What is the fuel consumption of the Haval H3 diesel 2.5T?

The comprehensive fuel consumption of the diesel version Haval H3-2.5T under mixed road conditions is approximately 7 liters per 100 kilometers. Fuel consumption is influenced by many factors such as driving conditions, driving habits, vehicle maintenance status, and vehicle load. Here is some information about the Haval H3: 1. Introduction: The Haval H3 is a newly developed segmented model tailored to meet different customer needs. It inherits the characteristics of SUV models, featuring spacious interiors and strong off-road capabilities. 2. Configuration: Equipped with a 2.0L 4G63S4M engine, it excels in economy, energy efficiency, and environmental protection. This engine adopts a single overhead camshaft and 16-valve design, incorporating the most advanced Delphi radio frequency technology. The intake and exhaust manifolds have been optimized to ensure even power output, with a maximum power of 90/5250 and maximum torque of 170/2500-3000. The fuel consumption is only 7L/100km (at a constant speed of 90 km/h), and it is equipped with OBD, meeting Euro IV emission standards.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.