What are the functions of the Hongqi H5 key buttons?

What Causes the Hissing Sound in a Car Compressor?

Here are the specific reasons for abnormal noise in a car compressor: 1. Electromagnetic clutch contamination: Due to the electromagnetic clutch's proximity to the ground, long-term driving can cause it to accumulate sewage or mud, leading to internal bearing damage and resulting in abnormal noise. 2. Loose drive belt: The car air conditioning compressor has high operational demands on the electromagnetic clutch. A loose drive belt increases the load on the electromagnetic clutch, making it prone to damage, and in severe cases, can cause the compressor to burn out. 3. Repeated engagement of the electromagnetic clutch: Repeated engagement of the electromagnetic clutch leads to insufficient generator output, causing the compressor to operate with inadequate voltage, which triggers abnormal noise. 4. Lack of lubricating oil: Insufficient lubricating oil inside the compressor. After prolonged use, the compressor should be appropriately lubricated to avoid abnormal noise or failure due to friction.

10

4

Share

How to Choose Car Wax?

Generally, dark-colored car paint should use black, red, or green series, while light-colored car paint should use silver, white, or pearl series. More expensive doesn't necessarily mean better; choose the brand according to the instructions, and once selected, avoid changing the model. When a car moves, it generates static electricity due to friction with the air, and car wax can effectively block the friction between the car body and air or dust. Less static means less dust adhesion, and car wax also provides a polishing effect, making the car look newer and more attractive. For new cars, it's best to wait 1-2 months before waxing. Below are related details: 1. Waxing Duration: New cars come with a factory-applied wax layer, so there's no need to wax immediately, as it would be wasteful and ineffective. However, since wax protection is short-lived, it typically lasts only 1-2 months, and even shorter in rainy weather. 2. Waxing Timing: Consider waxing when the car body feels rough or shows imperfections. For non-metallic paint on new cars, wax every 3 months; for metallic paint, wax every 6 months. 3. Benefits of Waxing: Waxing is a traditional car care practice that applies a protective layer to the car body. Its primary benefits include waterproofing and acid rain protection, as wax reduces water droplet adhesion. It also protects against high temperatures and UV rays—prolonged exposure to sunlight can cause paint fading and aging, but the wax film reflects some light, preventing paint damage. Additionally, waxing reduces static and dust accumulation.

3

1

Share

Is a Hot Tire Pressure of 270 High?

For most family cars, a tire pressure of 270 KPa is considered high. The normal tire pressure should be maintained between 230-250 KPa. Hazards of excessive tire pressure: The friction and adhesion of the tire will decrease, affecting braking performance; it can cause steering wheel vibration and deviation, reducing driving comfort; accelerate the localized wear of the tread pattern in the center of the tire, shortening tire life; increase body vibration, indirectly affecting the lifespan of other components; overstretching of the tire cords can lead to reduced elasticity of the tire body, increasing the load on the car while driving; puncture resistance decreases. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks and blowouts due to impact, leading to tire bursts. Hazards of insufficient tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; causes the steering wheel to become heavy and prone to deviation, among other factors detrimental to driving safety; increases the movement of various parts of the tire, causing abnormal heat due to excessive rolling; reduces the functionality of the cords and rubber, leading to delamination or cord breakage, and excessive friction with the rim causing damage to the bead area and abnormal wear; friction between the tire and the ground increases exponentially, rapidly raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in tire bursts; increases tire body deformation, making the tire side prone to cracks while generating flexing movements, leading to excessive heat, promoting rubber aging, fatigue of the cord layers, and cord breakage, also increasing the tire's contact area with the ground, accelerating shoulder wear.

6

3

Share

Will a touch-up pen corrode the original car paint?

Will a touch-up pen corrode the original car paint? A touch-up pen contains paint and solvent, and the solvent can dissolve the paint, so the touch-up pen will corrode the original car paint. Advantages of touch-up pens: Although a touch-up pen can fill gaps and block the contact between air and the car body surface, providing some rust prevention, it cannot replace professional automotive rust-proof paint. If the car paint is damaged, it is recommended to go to a 4S shop or a professional repair shop for spray paint repair, which is more reliable and worry-free. Disadvantages of touch-up pens: Touch-up pens can only be used temporarily. For deeper and larger scratches or exposed primer, they cannot achieve the same effect as professional paint repair, lacking gloss and having some color difference, so the results are not very ideal.

6

2

Share

Where is the car turn signal located?

Car turn signal switch is located on the lever behind the left side of the steering wheel. Pushing it downward with left hand activates the left turn signal, while pushing it upward activates the right turn signal. Function of turn signals: When turn signal is activated, the front, rear and side turn signals on that side will flash simultaneously to alert surrounding vehicles and pedestrians. Working principle of turn signals: The lamp uses xenon tube, controlled by microcontroller circuit that alternates left and right flashing continuously. When the vehicle turns, it activates flashing indicators in corresponding direction to warn pedestrians or vehicles in front or behind, indicating the vehicle's moving direction.

20

0

Share

What Causes Abnormal Noise When Depressing the Clutch Pedal?

Introduction to the causes of abnormal noise when depressing the clutch pedal: Insufficient tension of the return spring: When the engine is idling, there is a "rustling" friction sound inside the clutch. First, lift the pedal with your foot to see if there is any return movement. If there is return movement and the noise disappears, it indicates insufficient tension of the return spring. Failure of the release bearing return spring: If the pedal returns normally, check the free travel of the pedal. Adjust if it does not meet the requirements. If the free travel is normal and there is a knocking or friction sound when the engine speed changes, it indicates a failure of the release bearing return spring. Noise from the release bearing: Slowly depress the clutch pedal until the free travel is just eliminated (i.e., when the inner end of the release lever just contacts the release bearing). If a "rustling" sound occurs at this moment, it indicates noise from the release bearing.

14

2

Share

What are the functions of the Hongqi H5 key buttons?

What Causes the Hissing Sound in a Car Compressor?

How to Choose Car Wax?

Is a Hot Tire Pressure of 270 High?

Will a touch-up pen corrode the original car paint?

Where is the car turn signal located?

What Causes Abnormal Noise When Depressing the Clutch Pedal?

What are the reasons for water leakage in the main driver's compartment of a car?

What is an Automotive Starter Motor?

What is the Relationship Between Car Air Conditioning and Fuel Consumption?

What is the normal voltage for car leakage?