What are the functions of the Haval Big Dog car key?

3 Answers
DiAbigail
07/29/25 8:39pm
Haval Big Dog car key functions include opening the car door, closing the car door, making the car sound, and locking the car. Currently, car keys are usually remote keys. The following is a detailed introduction about car remote keys: Overview: Car remote keys utilize the wireless remote control function of the central locking system, allowing the door to be opened and locked from a distance without inserting the key into the keyhole. The advantage is that it can remotely unlock and lock the car anytime and anywhere. At the same time, it can also sense the location of the vehicle. Composition and classification: The car remote key system mainly consists of two parts: the transmitter and the receiver. The transmitter is composed of a transmission switch, transmission antenna (keypad), integrated circuit, etc. According to their usage methods, they can be divided into three categories: active working mode, passive working mode, and coil induction mode.
Was this review help?
11
2
Share
OJudah
08/14/25 5:52pm
I've been driving the Haval Big Dog for a while now, and the key functions are quite practical. Unlocking the car doors is as simple as pressing a button or just approaching the car for automatic unlocking, saving me the hassle of fumbling for the key. When locking the car, the lights flash once to confirm, so I never have to worry about forgetting to lock it. Finding the car in a parking lot is also convenient—just press the car-finder button, and the lights turn on with a honk, making it easy to locate at a glance. The best feature is the remote engine start; pressing the button to warm up the car before heading out in winter means stepping into a cozy cabin with the heater already on. The trunk has a dedicated button, making it super convenient to open with a single press when loading groceries or luggage. The key also has an anti-theft design with an encrypted chip to prevent duplication, ensuring both safety and peace of mind. Overall, these features make the driving experience more efficient, especially in city life with frequent parking, adding a lot of convenience.
Was this review help?
5
0
Share
Expand All
SanMichael
10/16/25 5:45am
As a car owner, I find the multifunctionality of the Haval Big Dog key quite impressive. The keyless entry allows me to simply pull the door handle to start the car without fumbling for the keyhole. The remote engine preheating saves time, especially before getting into the car on rainy or cold nights, making the ride more comfortable. The dedicated trunk button opens the trunk with a single press, making loading and unloading items very convenient. The car-finding function is highly responsive, with flashing lights indicating the car's location, so getting lost in a parking garage is no longer a worry. In terms of security, the double flashing lights provide immediate feedback after locking the car, and the anti-theft system is difficult to bypass. The key is compact and easy to carry, posing no burden in daily use. The overall design is user-friendly, making driving much more effortless.
Was this review help?
13
3
Share
Expand All
More Forum Discussions

What is the adjustment method for a hydraulic clutch?

Hydraulic clutches cannot be adjusted for height. A high hydraulic clutch position indicates severe wear of the clutch three-piece set, resulting in excessive free travel of the clutch. This requires replacing the clutch disc, driven plate, and release bearing. Solutions for a heavy hydraulic clutch include: 1. The clutch operating mechanism's mechanical part is stuck: The clutch master cylinder lacks hydraulic oil or has a leak; replace the clutch or add clutch fluid. 2. The clutch slave cylinder is rusted: The clutch booster cylinder's air passage is blocked or the cylinder is leaking air; replace the clutch slave cylinder. 3. The clutch release fork is broken or bent: The release bearing or bearing seat has fallen off. Replace the clutch release bearing.
4
0
Share

What lights should be used when passing through an intersection at night?

When passing through a signalized intersection at night, low beam headlights should be used. Here are the specific details: 1. Passing through intersections at night. If passing through an intersection without traffic signals, it is necessary to alternate between high and low beam headlights when approaching the intersection to alert vehicles and pedestrians in the perpendicular direction. Additionally, speed should be reduced when nearing the intersection to prevent sudden incidents, allowing sufficient time to respond. 2. Use of lights at night. When driving on well-lit roads, low beam headlights should be used, and they should also be used when following another vehicle to make it easier for the preceding vehicle to observe the situation behind through the rearview mirror. If meeting an oncoming vehicle at a distance of 150 meters, high beams should be switched to low beams. Furthermore, when driving at night and encountering slopes, arched bridges, crosswalks, sharp curves, or when overtaking another vehicle, it is necessary to alternate between high and low beam headlights.
5
1
Share

Reasons for the Vehicle Not Accelerating When the Throttle is Increased

About the reasons for the vehicle not accelerating when the throttle is increased are introduced as follows: 1. Insufficient engine torque. (1) Engine misfire: The ignition coil of a certain cylinder is damaged, causing the engine to change from 4 cylinders to 3 cylinders. At this time, the fuel efficiency of the engine is very low, and the output torque value of the engine is small. (2) Problem with the engine fuel pump: The engine fuel pump is damaged, leading to insufficient fuel supply from the engine, resulting in weak acceleration. (3) Problem with valve timing: To improve the fuel efficiency of the engine, modern engines use a CVVD valve timing system. However, if the CVVD hydraulic control system is damaged or the sealing ring leaks oil, it will also reduce the engine's fuel efficiency, leading to poor engine output torque. 2. Damage to the vehicle's transmission. The vehicle's transmission experiences slipping and wear, and the power output from the engine cannot be transmitted to the vehicle's tires, causing the vehicle speed to not increase. If the clutch friction plate is excessively worn, causing the clutch temperature to rise very easily, it will also make the input and output ends of the clutch very prone to slipping. The engine's power cannot be fully transmitted to the transmission, resulting in the vehicle's inability to accelerate.
7
5
Share

Does the throttle control air intake or fuel intake?

Throttle controls air intake, here are the details: 1. The throttle controls the air intake through the throttle valve. After the air intake is determined, the engine computer will decide how much fuel to inject based on this air intake. The throttle valve helps achieve the optimal air-fuel ratio, ensuring complete combustion of gasoline and maximizing energy utilization for power generation. 2. Introduction to gasoline engines. Gasoline engines rely on spark plugs to ignite the fuel. The air and gasoline form a mixture that enters the cylinder. When the piston approaches the top dead center, the spark plug ignites the mixture, and the flame spreads outward from the spark plug until complete combustion occurs. This process requires a certain amount of time.
6
2
Share

What is the fuel consumption of the Fengjun 5?

Fengjun 5 fuel consumption is 9.9L/100KM, here is the relevant information: 1. Vehicle positioning: Fengjun 5 is a pickup truck under Great Wall, with dimensions of 5095mm in length, 1800mm in width, and 1740mm in height, a wheelbase of 3050mm, and a front-engine, rear-wheel-drive layout. 2. Power: It uses a 2.4L naturally aspirated engine with a maximum torque of 230 N·m, paired with a 5-speed manual transmission. 3. Suspension type: The front suspension is double-wishbone independent suspension, the rear suspension is leaf spring non-independent suspension, and the tire specification is 235/70R16.
8
2
Share

How Long Does the BYD Qin Battery Last?

BYD Qin's battery lifespan ranges between 5 to 8 years. There are primarily two types of batteries for the BYD Qin models available in the market: those produced after 2018 use ternary lithium batteries, while models before 2018 are equipped with lithium iron phosphate batteries. BYD is a Chinese automotive brand established in 1995, specializing in the production of commercial and family sedans, as well as batteries. Starting with a team of just over 20 people, BYD grew to become the world's second-largest rechargeable battery manufacturer by 2003, the same year it ventured into automobile manufacturing. In the passenger vehicle market, BYD operates in both the traditional fuel-powered and new energy vehicle sectors. Since launching the world's first mass-produced plug-in dual-mode electric vehicle in 2008, BYD has introduced a series of new energy models, including the e6, Qin, Tang, Song, Yuan, Han, and Dolphin. The BYD Qin is a high-performance sedan independently developed by BYD Co., Ltd., featuring the second-generation DM technology that allows switching between pure electric and hybrid electric modes. Its body dimensions are 4740mm in length, 1770mm in width, and 1480mm in height.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.