What are the functions of the Geely Haoyue key?

1 Answers
SanVictoria
07/29/25 2:57pm
Geely Haoyue key functions are as follows: 1. Engine anti-theft: This vehicle is equipped with a passive anti-theft system. The system does not require manual activation or deactivation. When the start switch is pressed and a valid remote control is detected inside the vehicle, the engine disable system will automatically deactivate. 2. Keyless unlocking: As long as a valid remote control is within a 1.6-meter range around the vehicle, simply pull the outer handles of the two front doors to unlock and open the doors. 3. Keyless locking: After turning off the start switch and closing the doors when leaving the vehicle, lightly touch the sensor area on the driver's side or front passenger's side door handle with your thumb to lock all four doors without pressing the lock button on the remote control. 4. Remote locking and unlocking: Press the unlock button on the remote control once to unlock all four doors, with the turn signals flashing three times for confirmation, interior lights gradually turning on, and position lights illuminating. Press the lock button on the remote control once to lock all four doors, with the turn signals flashing for confirmation, interior lights gradually turning off, and position lights extinguishing. Press and hold the trunk open button for more than two seconds to pop open the trunk (sedan version) or unlock the rear hatchback (hatchback version).
Was this review help?
6
4
Share
More Forum Discussions

Where is the Ruimai engine produced?

The Ruimai engine is produced in Italy. The function of the engine is to convert the thermal energy of gasoline into mechanical energy by burning and expanding the gas in a sealed cylinder, thereby pushing the piston to perform work. Taking the 2020 Ruimai as an example, it belongs to the pickup truck category, with body dimensions of: length 5305mm, width 1860mm, height 1785mm, a wheelbase of 3095mm, and a fuel tank capacity of 76 liters. The 2020 Ruimai features a double-wishbone independent front suspension and a leaf spring non-independent rear suspension. It is equipped with a 2.4L turbocharged engine, delivering a maximum horsepower of 211PS, a maximum power of 155kW, and a maximum torque of 320Nm, paired with a 5-speed manual transmission.
15
4
Share

How many digits does a vehicle frame number have?

An vehicle frame number consists of 17 digits. The Vehicle Identification Number (VIN) is a unique set of numbers used on automobiles to identify the manufacturer, engine, chassis serial number, and other specifications of the vehicle. Since each manufacturer uses different codes, and every vehicle produced in the same factory has its own production sequence number, each vehicle manufactured in a specific year has a unique frame number. The meanings represented by the frame number: 1. Digits 1 to 3 represent the WMI code for the manufacturer, brand, and type; 2. Digits 4 to 8 indicate vehicle characteristics; 3. The 9th digit is a check digit; 4. The 10th digit represents the model year; 5. The 11th digit indicates the vehicle assembly plant; 6. Digits 12 to 17 are the sequential number.
13
1
Share

Can a Car with Window Tinting Pass the Annual Inspection?

According to regulations, a car with window tinting can pass the annual inspection. The key requirements are that the light transmittance of the front windshield and the glass in the driver's mirror-viewing area must be greater than or equal to 70%. Reflective film is not allowed on the front windshield, and no tinting is permitted in the rearview mirror area. During the annual inspection, the vehicle's exterior must match the appearance shown on the vehicle registration certificate. Self-inspection should be conducted beforehand on components such as license plate fasteners, screws, wipers, and paint. Car window tinting involves applying high-molecular polymer materials to the vehicle's surface to protect the original paint, decorate the body, and achieve personalized colorful effects. It can be easily removed at any time, offering visible and tangible physical characteristics that contrast sharply with traditional paint treatments like glaze sealing, coating, or painting, which chemically alter the paint surface.
20
5
Share

How to Remove Adhesive from a Car?

Methods to remove adhesive from a car include: 1. Wipe with a damp cloth; 2. Spray and wash with a specialized adhesive remover; 3. Clean with foam cleaner; 4. Wipe with vinegar, then scrape off after the vinegar dissolves the adhesive; 5. Apply medicated oil; 6. Use alcohol for wiping; 7. Remove adhesive with automotive heat insulation cleaner. The functions of car paint are: 1. Protecting the car from corrosion by various atmospheric agents; 2. Decorating the car; 3. Identifying the type of vehicle; 4. Enhancing comfort and sealing, reducing noise caused by vibrations. Car paint maintenance methods include: 1. Wash the car only after the engine has cooled down; 2. Minimize exposure to direct sunlight; 3. Promptly clean dirt from the car body; 4. Rinse with clean water after rain to prevent acid rain corrosion; 5. Apply wax or glaze coating.
4
1
Share

How Long Does a Car Need to Sit Before It's Considered a Stock Vehicle?

A car is considered a stock vehicle if it has been sitting for more than three months from its production date. Here are the methods to check if a new car is a stock vehicle: 1. Check the vehicle's nameplate; 2. Inspect the tire wear and production date; 3. Examine the cleanliness of the exhaust pipe's inner wall; 4. Look for dust in the engine compartment, check for deformation or discoloration of components, ensure everything is tidy, and look for signs of removal; 5. Inspect the rubber parts of the car body for aging or detachment; 6. Check the foot pedals inside the car for wear or excessive dust in the gaps; 7. Observe the gaps in the front and rear bumpers, body panels, and doors, and check for color differences in the paint when opening the doors; 8. Ensure the paint on the lower edge of the door frame is intact.
8
4
Share

What Causes the Steering Wheel to Make a Clicking Sound When Turned to Full Lock?

The reasons for the steering wheel making a clicking sound when turned to full lock are: 1. Excessive clearance in the rack of the steering gear; 2. Excessive clearance in the universal drive assembly; 3. Damaged pressure bearing of the shock absorber; 4. Dirty or deteriorated hydraulic oil, leading to reduced lubrication performance; 5. Damaged power steering pump. The solutions to fix the clicking sound when the steering wheel is turned to full lock include: 1. Adjusting the clearance in the rack of the steering gear or the universal drive assembly; 2. Inspecting and replacing the pressure bearing of the shock absorber; 3. Promptly replacing the hydraulic oil; 4. Checking the working condition of the power steering pump. Steering wheels can be categorized into single-spoke, dual-spoke, triple-spoke, and four-spoke designs. Their function is to convert the force applied by the driver on the edge of the steering wheel into torque, which is then transmitted to the steering shaft.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.