What are the functions of the four buttons on the 14th-generation Sylphy car key?

What are the new regulations for annual inspection?

New regulations for driver's license annual inspection are as follows: 1. Small motor vehicle licenses such as C1 do not require annual inspection: The holder must apply for review and renewal at the vehicle management office within 90 days before the expiration date marked on the license, presenting ID card, health certificate, and driver's license. 2. Large motor vehicle licenses such as A1, A2, etc.: Within 30 days after the end of each scoring cycle, the holder must present ID card, driver's license, and health certificate at the vehicle management office to apply for license review. 3. If the holder has no violation record in the current scoring cycle: The current driver's license review can be exempted.

7

2

Share

What is the approximate fuel consumption of the Sonata 8?

The official combined fuel consumption of the Sonata 8 is 7.7L/100km. However, the actual fuel consumption of a car varies slightly depending on each driver's habits and skills. Smooth driving habits result in lower fuel consumption, while aggressive driving behaviors like frequent high-speed overtaking can appropriately increase fuel consumption. Here are some methods to reduce fuel consumption: 1. Check the air conditioning system in summer: Air conditioning malfunctions are a significant cause of high fuel consumption. Poor cooling performance may lead to increased fan speed and lower temperature settings to achieve a comfortable effect. 2. Frequent hard braking: Repeated hard braking is a primary factor causing persistently high fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. 3. Avoid excessive air conditioning usage in small-displacement vehicles: For vehicles exposed to direct sunlight, avoid turning on the air conditioning immediately after entering. First, open the windows and set the blower to a higher setting without the air conditioning to expel hot air, then turn on the air conditioning after the vehicle has moderately cooled down.

19

5

Share

Where are the accelerator and brake located in a manual transmission car?

In a manual transmission car, the accelerator and brake are located below the driver's side in the left cabin. Manual transmission cars have three pedals, arranged from left to right as follows: clutch pedal, brake pedal, and accelerator pedal. In a manual transmission car, the driver uses the left foot to operate the clutch and the right foot to operate the brake and accelerator. When starting the vehicle, first start the engine. Press the clutch pedal all the way down with the left foot, shift into first gear, release the handbrake, and slowly release the clutch to the half-clutch position with the left foot. If the tachometer fluctuates slightly or the vehicle shows a tendency to move, gently press the accelerator with the right foot while continuing to steadily release the clutch with the left foot. Once the vehicle starts moving, quickly lift the clutch. While driving, the left foot should not rest on the brake pedal. In manual transmission cars, the left foot is only used to press the clutch pedal when shifting gears. During normal driving, the left foot should not rest on any pedal. Both the brake and accelerator are controlled by the right foot. There are two main reasons why the left foot should not rest on the pedal: 1. During long drives, both feet can become very tired, leading to unintentional pressing. If the left foot is on the brake pedal at this time, pressing it could easily cause an accident. 2. Most people are right-handed, so the right foot reacts faster. In case of an emergency, the right foot can respond quickly by lifting off the accelerator and pressing the brake pedal. If the left foot is on the brake pedal, the right foot would be suspended, making it easy to press both pedals simultaneously, which is dangerous. Additional information about the car's brake and accelerator: The brake is a mechanical device that slows down the vehicle, also known as a decelerator. The brake pedal is located below the steering wheel. Pressing the brake pedal activates the brake linkage, which applies pressure to the brake pads on the brake drum, slowing or stopping the vehicle. The accelerator controls the fuel supply in an internal combustion engine. In cars, the accelerator is usually controlled by a pedal, also known as the throttle, which regulates the fuel supply to the engine. When pressing the brake or accelerator, the body needs support to maintain balance. While the right foot operates the pedals, the left foot stabilizes the body on the floor. If both feet are on the pedals, they are both semi-suspended, lacking a stable point of support, which can lead to unstable operation of the accelerator or brake. Tips for novice drivers: 1. Always use turn signals when changing lanes or turning: Lights and horns are the language of driving. It's essential to communicate your intentions, especially for beginners. Always signal early to ensure safety. Avoid the bad habit of turning or changing lanes immediately after signaling. Instead, activate the turn signal in advance to prevent accidents. 2. Follow the proper procedure when overtaking: When overtaking, activate the left turn signal in advance and use high beams, low beams, or the horn. On roads without a centerline or with only one lane in the same direction, the vehicle ahead should reduce speed and move to the right when signaled by the vehicle behind. The overtaking vehicle should ensure a safe distance before passing on the left and activate the right turn signal to return to the original lane after maintaining a safe distance. 3. Check surroundings before reversing: Before reversing, inspect the surroundings. Do not rely solely on rearview mirrors, parking sensors, or backup cameras. If someone is guiding you, they should stand beside the vehicle, not behind it, to avoid being hit. 4. Slow down and observe at intersections: Intersections are complex with vehicles, pedestrians, and cyclists from all directions. Always look around and slow down, regardless of traffic lights or right-of-way, to ensure no one is crossing before proceeding. 5. Check for tailgaters before emergency braking: During emergency braking, check for vehicles behind you. Maintain a safe distance from the vehicle ahead to avoid rear-end collisions. 6. Maintain a safe distance from the vehicle ahead: Road conditions are unpredictable. The vehicle ahead may stop suddenly, or pedestrians may dart out. Control your speed and avoid speeding. Keep a safe distance to allow time to react to sudden lane changes or other hazards. 7. Slow down and check surroundings when turning: Always reduce speed when turning. Watch for pedestrians and cyclists on the road, especially in areas where they might use vehicle lanes. Use mirrors to check for them and yield if necessary. 8. Prefer the middle lane when driving: On roads without a central divider, driving in the middle lane provides more time to react if oncoming vehicles swerve. On divided roads, it allows time to react if someone or something suddenly emerges from the divider. At night, the middle lane reduces glare from oncoming headlights, improving visibility of pedestrians or obstacles. 9. Slow down and honk in poor visibility: In low-visibility conditions due to weather or road layout, slow down and honk to alert others before proceeding safely. 10. Slow down near parked large vehicles: Large parked vehicles can block your view, hiding pedestrians or other vehicles that might suddenly emerge. Slow down and proceed only when it's safe.

2

5

Share

What brand is Pirelli tires?

Pirelli is Pirelli tires, one of the world's most renowned tire companies. Founded in Italy in 1872, Pirelli is also the main sponsor of the Inter Milan football club. It operates 24 factories in 12 countries worldwide. Over a century of tire manufacturing experience has endowed Pirelli tires with superior performance in comfort, durability, and safety. Pirelli places high importance on the Chinese market and has long been recognized by world-famous automobile manufacturers. Prestigious car brands such as Audi, Bentley, Ferrari, Lamborghini, BMW, and Mercedes-Benz all designate Pirelli tires as their original equipment tires. Pirelli tires feature the following characteristics: Safety: The tire tread pattern utilizes I.B.S. (Interlocking Block System) technology, enhancing performance on both dry and wet surfaces. It ensures safety under extreme conditions while also reducing braking distance. Two wide lateral grooves on the unidirectional tread provide higher safety on slippery surfaces, while innovative blade-shaped longitudinal grooves ensure traction during precise steering and improve grip on snowy roads. Fuel Efficiency: Reduces fuel consumption and CO2 emissions. With green performance technology, it can reduce the tire's rolling resistance by up to 20%, thereby achieving fuel savings of up to 4%.

5

3

Share

What are the handling methods for drunk driving of motor vehicles?

There are mainly three types of handling methods for drunk driving of motor vehicles. Below is a detailed introduction to the corresponding handling methods for these three situations: 1. No traffic accident caused: For drunk driving of motor vehicles, the traffic management department of the public security authority will restrain the driver until sober, revoke the motor vehicle driving license, and investigate for criminal responsibility according to the law; the driver shall not re-obtain the motor vehicle driving license within five years. 2. Causing a major traffic accident: If a major traffic accident is caused by drunk driving or driving under the influence of alcohol, constituting a crime, criminal responsibility shall be investigated according to the law, and the traffic management department of the public security authority shall revoke the motor vehicle driving license, and the driver shall not re-obtain the motor vehicle driving license for life. 3. Drunk driving of motor vehicles again: For driving under the influence of alcohol, the motor vehicle driving license shall be temporarily suspended for six months, and a fine of not less than 1,000 yuan but not more than 2,000 yuan shall be imposed. If a driver is penalized for driving under the influence of alcohol and drives under the influence of alcohol again, the driver shall be detained for not more than 10 days, fined not less than 1,000 yuan but not more than 2,000 yuan, and the motor vehicle driving license shall be revoked.

1

0

Share

How to eliminate the 'Please check brake light' warning?

Methods to eliminate the 'Please check brake light' warning: You need to check whether the brake light bulb is burnt out or if the brake light fuse is blown. If the brake light bulb is burnt out, replacing it with a new one will eliminate the warning. Relevant information is as follows: 1. 'Please check brake light': This indicates there is an issue with the car's brake light bulb, possibly causing the brake light not to illuminate. 2. Brake lights are generally installed at the rear of the vehicle: These lights are primarily red in color to enhance the penetration of the light source, making it easier for following vehicles to notice when the front vehicle brakes, even in low visibility conditions, thereby helping to prevent rear-end collisions.

6

5

Share

What are the functions of the four buttons on the 14th-generation Sylphy car key?

What are the new regulations for annual inspection?

What is the approximate fuel consumption of the Sonata 8?

Where are the accelerator and brake located in a manual transmission car?

What brand is Pirelli tires?

What are the handling methods for drunk driving of motor vehicles?

How to eliminate the 'Please check brake light' warning?

Can I continue driving if the Sagitar shakes after wading through water but then returns to normal?

Is the particulate filter of the Tayron 1.4T prone to clogging?

How to Make Up for Overdue Vehicle Inspection?

Will points be deducted if the license plate is dented in a collision?