What are the functions of the Civic's center console buttons?

What causes the insufficient power of Roewe 350?

When the engine power is used at high RPM, the noise becomes noticeable. The suspension is relatively stiff, and the steering system feels slightly heavy at low speeds. Here is the extended information about the Roewe 350: 1. Engine: The Roewe 350 is equipped with a 1.5L-VTi-Tech high-efficiency engine. Compared to the older 350 model, the Roewe 350 has undergone technical upgrades in fuel economy. By applying new technologies, improvements have been made to the chassis, engine, and transmission, reducing fuel consumption to only 6.9L, which is 12% lower than the older 350 model. The 2014 350 model added Tiptronic manual-automatic transmission technology, offering four driving modes: D, S, M, and W. 2. Features: Roewe has also added an ECO economy status reminder function. When the driver is in a fuel-saving driving mode, the "ECO" light illuminates, providing timely feedback on fuel consumption conditions and helping the driver develop good economical driving habits.

12

3

Share

Is There a Time Limit for Subject 4?

There is a time limit for the Subject 4 exam, with each test session lasting 45 minutes, but there is no limit to the number of attempts for Subject 4. Below are detailed explanations about it: 1. Explanation One: Starting from the registration for the driver's license, after passing the Subject 1 exam, the validity period is three years, during which all subjects must be completed. 2. Explanation Two: For those who have not taken the Subject 1 exam or failed it, the registration fee remains valid indefinitely. 3. Explanation Three: Also known as the Subject 4 theory test or driver theory test, it is part of the assessment for the motor vehicle driver's license. After the implementation of the Ministry of Public Security Order No. 123, the Subject 3 exam was divided into two parts, adding a safe and civilized driving test in addition to the road test.

7

3

Share

What Causes the Brake to Not Release?

Generally, it's due to a faulty brake switch. Replace the brake switch and adjust the brake cable. Below are specific details about the parking brake: 1. Introduction: The professional term for the parking brake is auxiliary brake. Unlike the main brake, it uses a steel cable connected to the rear brake to stop the vehicle. 2. Usage: Long-term use of the parking brake can cause the steel cable to undergo plastic deformation. Since this deformation is irreversible, prolonged use will reduce its effectiveness, and the parking brake's travel distance will also increase. Here are some additional details: 1. Maintenance: Regularly perform appropriate maintenance and inspections on the vehicle's parking brake. Some people, due to irregular maintenance, often need to lift the parking brake twice to stop the vehicle. If not careful when parking, the vehicle may slightly move backward, so the use and maintenance of the parking brake should not be overlooked. 2. Effective Point of the Parking Brake: You can park the car in a quiet place, slowly pull up the parking brake while counting the clicks from the ratchet until the handle reaches its limit. Then calculate 70% of the total number of clicks—this position is the effective working point of the parking brake handle.

6

2

Share

What kind of light is the headlight turned on in Subject 3?

Headlights refer to the vehicle's high beam, low beam, and turn signals, with the low beam being part of the headlights. Here are detailed explanations about it: 1. Explanation one: In the Subject 3 exam, turning on the headlight means turning on the low beam, and only the low beam can be turned on. This is because each instruction is connected, and if the high beam is turned on initially, the subsequent operations cannot be performed. 2. Explanation two: In vehicle usage, the requirements for headlights are to provide good illumination while avoiding dazzling oncoming drivers.

3

Share

What is the fuel consumption of a 3.5 V6 engine?

3.5 V6 engine fuel consumption is 14.2L/100km. The following is a detailed introduction to the 3.5 V6 engine: 1. Introduction: The 3.5L V6 turbocharged engine has a maximum power of 309kW (421Ps) and is paired with a 10-speed automatic transmission. 2. Advantages: Compared to the L6, the V6 features a V-shaped cylinder arrangement versus an inline 6-cylinder layout. The V6's cylinders are arranged in a V shape, which saves more space than the L6, making it easier to position the engine transversely or longitudinally for vehicle design. However, the V6 engine is not as smooth as the L6, often requiring the addition of stabilizer bars because the L6's symmetrical cylinder arrangement allows vibrations to partially cancel each other out.

5

3

Share

What is the wading depth of the Ford Raptor?

The maximum wading depth of the Ford Raptor is 500mm. The wading depth of the Ford Raptor is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a reference when passing through waterlogged roads. If the air intake of the Ford Raptor is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake (and thus the maximum wading depth) can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the automatic start-stop function to prevent the engine from automatically restarting after stalling in water, which could cause severe damage due to water ingestion. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Follow the path taken by other vehicles and drive at a low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, or other reference points like the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the tire height or the engine's air intake, do not proceed and choose an alternative route instead.

8

1

Share

What are the functions of the Civic's center console buttons?

What causes the insufficient power of Roewe 350?

Is There a Time Limit for Subject 4?

What Causes the Brake to Not Release?

What kind of light is the headlight turned on in Subject 3?

What is the fuel consumption of a 3.5 V6 engine?

What is the wading depth of the Ford Raptor?

Does the score reset date change after adding a driving license?

What Causes a Car to Have No Clutch?

Is the Brake Pedal Higher Than the Accelerator Pedal?

What is the function of the roof drain channel clip on the Mazda6?