···
Log in / Register

What are the functions of the BYD F0 center console buttons?

3 Answers
LeArabella
08/30/25 8:41am
BYD F0 center console buttons have the following functions: AUTO + red and blue stripes: Represents the automatic climate control function, where red indicates temperature (hot) and blue indicates temperature (cold). Operation method: Press this knob once, and the middle indicator light will turn on, indicating that the automatic air conditioning is activated. You can rotate the knob to set the desired cold or hot temperature based on the current actual temperature. The automatic air conditioning will adjust the interior temperature according to the temperature set by the driver. DUAL + red and blue stripes: Represents the dual-zone air conditioning function, with the same meaning for red and blue as above. Similarly, press the knob, and the indicator light will turn on, indicating that the dual-zone air conditioning is activated.
Was this review help?
1
1
Share
BeauMarie
09/12/25 5:33am
I've been driving a BYD F0 for several years, and the button design on the center console is quite user-friendly. The central air conditioning button is the most frequently used—rotating the knob adjusts the temperature, pressing up increases the airflow, and pressing down decreases it. It can also switch to ventilation mode or defogging function. The audio buttons are on the right, featuring volume adjustment and channel switching buttons, making it convenient for listening to the radio or music. The window control buttons are located near the door handle, allowing you to open or close the windows with a simple press up or down, and the one-touch up/down design is very practical. The door lock button enables quick locking or unlocking, ensuring safety and convenience. Auxiliary buttons like the fog light switch are crucial for driving in rainy conditions. I recommend owners regularly clean the buttons to prevent dust buildup and malfunction. During commutes, the air conditioning and audio buttons are used frequently, with clear tactile feedback that prevents distraction while driving. Overall, the compact and intuitive layout of these functions makes them easy for beginners to master. Familiarity with the button positions significantly enhances the driving experience—just avoid frequent operation on bumpy roads.
Was this review help?
14
2
Share
Expand All
VanGabriella
10/26/25 6:21am
As a tech enthusiast, I focus on the logic behind the button functions in the BYD F0's center console. The air conditioning buttons include a temperature control knob, with the fan speed button corresponding to different wind speed levels. The mode switch button can set the airflow to head, foot, or defrost with internal circulation. The audio buttons are connected to the radio module, featuring volume adjustment and channel selection functions. The window control buttons operate electronically for one-touch up/down movement of the door glass. The door lock button drives the central locking system for quick and convenient locking. The fog light switch is independently designed specifically for rainy day illumination. Most of these buttons use contact designs that are resistant to wear. However, common issues such as dust ingress causing button failure may require disassembly for cleaning or circuit board replacement. I often advise car owners to keep the center console dry to prevent circuit short circuits. The buttons respond quickly and are safe and reliable, but daily use should involve gentle pressing to avoid damage. Although the functions are basic, they are practical and support driving needs.
Was this review help?
6
2
Share
Expand All
More Forum Discussions

What Causes the Abnormal Noise from the Oil Pump?

It may be related to the viscosity of the engine oil. At low RPM, the oil pump pressure cannot reach the normal level, resulting in insufficient tension of the hydraulic tappet and causing abnormal noise. Below is a detailed introduction about engine oil: 1. Introduction: Engine oil, also known as engine lubricant (English name: Engine-oil), has a density of approximately 0.91×10³ (kg/m³). It serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and act as a shock absorber in the engine. It is often referred to as the 'blood' of a car. Engine oil consists of two parts: base oil and additives. The base oil is the main component of lubricating oil, determining its fundamental properties, while additives compensate for and improve the shortcomings of the base oil, providing certain new characteristics, making them an essential part of lubricating oil. 2. Performance: Lubricity, low-temperature operability, viscosity-temperature characteristics.
1
4
Share

Why is there still oil leakage after replacing the new turbocharger?

Turbine oil return pipe is blocked or coolant enters the cylinder (cylinder gasket), low cylinder pressure, poor fuel atomization, late ignition timing, low engine temperature and other reasons. The following are precautions for using turbochargers: 1. Do not shut down immediately: After the engine has been running at high speed for a long time, do not shut it down immediately. When the engine is working, part of the oil is supplied to lubricate the turbocharger rotor bearings and for cooling. 2. Heat transmission: After a running engine is suddenly shut down, the oil pressure drops rapidly to zero, and the high temperature of the turbocharger turbine part is transmitted to the middle. The heat in the bearing support housing cannot be quickly dissipated, while the turbocharger rotor is still rotating at high speed under inertia. Therefore, if the engine is suddenly shut down in a hot state, it will cause the oil retained in the turbocharger to overheat and damage the bearings and shaft. Special attention should be paid to preventing sudden shutdown after stepping on the accelerator several times.
19
3
Share

What does engine oil ash content mean?

It is normal for engine oil to produce a certain amount of ash during engine operation, as a small amount of additives in the oil will burn and generate ash. Here is a detailed introduction about automotive engine oil: 1. Introduction: Engine oil, also known as engine lubricant (English name: Engine-oil), with a density of approximately 0.91×10³ (kg/m³), serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. It is often referred to as the "blood" of a car. Engine oil consists of two main components: base oil and additives. The base oil is the primary constituent of the lubricant, determining its fundamental properties, while additives compensate for and improve any deficiencies in the base oil's performance, imparting new characteristics. Additives are an essential part of lubricants. 2. Performance: Lubricity, low-temperature operability, viscosity-temperature characteristics.
10
2
Share

What are the benefits of filling car tires with nitrogen?

The benefits of filling car tires with nitrogen are as follows: 1. Reduced risk of tire blowouts: When a car is in motion, the friction between the tires and the road causes a rapid increase in temperature, especially during high-speed driving. The sudden rise in gas temperature inside the tire leads to a sharp increase in tire pressure, which can result in blowouts. Compared to filling tires with regular air, high-purity nitrogen, being oxygen-free, moisture-free, and oil-free, has a much lower thermal expansion coefficient. This effectively slows down the heat accumulation in the tire, significantly enhancing tire safety and reducing the likelihood of blowouts. 2. Reduced driving noise: Nitrogen is a diatomic gas with low chemical reactivity and very low audio conductivity, only about one-fifth that of ordinary air. Using nitrogen can effectively reduce tire noise during driving, noticeably improving driving quietness. 3. Extended tire lifespan: With nitrogen, tire pressure remains more stable, and the volume change of the gas inside the tire is minimized. This significantly reduces irregular tire wear, thereby indirectly extending the tire's lifespan. 4. Lower fuel consumption: During driving, insufficient tire pressure and increased resistance due to heat can lead to higher fuel consumption. Nitrogen-filled tires maintain very stable pressure, and nitrogen's low thermal conductivity and slow heating properties effectively reduce temperature increases during high-speed driving, thereby lowering rolling resistance and noticeably reducing fuel consumption.
5
5
Share

What are the differences between the 2017 Magotan and the 2018 Magotan?

The exterior differences between the 2017 Magotan and the 2018 Magotan are not particularly significant, with the 2018 model featuring more refined details. Below are the detailed specifics about the Magotan: 1. The 2017 Magotan and the 2018 Magotan do not have major differences, maintaining the standard Volkswagen-style interior with only subtle changes in details. Compared to the 2017 model, the 2018 Magotan appears more refined in its details. 2. From the exterior, the 2018 model looks more sporty, with sharper body line designs. The front fascia adopts a horizontal grille design, and the flat grille is decorated with chrome trim. 3. The Volkswagen Magotan is a mid-size car launched by FAW-Volkswagen, which has caused quite a stir since its debut. This car has always been a benchmark in the mid-size car segment, attracting attention with its continuous air vent design and a dashboard that tilts towards the driver's side, emphasizing the driving experience.
12
4
Share

How to Disassemble the Universal Joint of Sylphy?

The disassembly method for the universal joint of Sylphy is as follows: 1. Lift the front end of the vehicle with a jack. Place the jack at the front of the frame to ensure stability. Drain the transmission fluid to prevent leakage. Remove the transmission filler plug; 2. Prepare a container for the fluid and disconnect the transmission drain plug. Create reference marks to ensure the integrity of the driveshaft assembly. Remove the mounting clamps or bolts to detach the drive shaft; 3. Remove the driveshaft from the transmission by detaching the retaining straps. Secure the needle bearing caps with tape to prevent impact damage. Stabilize the secondary driveshaft. Remove the tape. Extract the bearing from the yoke by removing the retaining ring; 4. Use sockets of different sizes and leverage from a vise to pry the bearing caps away from the yoke. Push the caps onto the assembly with pliers. Flip the driveshaft in the vise and repeat the previous steps on the other end; 5. Separate the universal joint from both yokes and the driveshaft. Remove all dirt and debris from the entire driveshaft assembly, ensuring it is thoroughly clean. Apply a small amount of grease to the replacement caps. Partially insert the bearing caps into the yokes and replace the bearing caps; 6. Install the universal joint into the caps. Partially insert the opposing caps. Align the universal joint and use a press to push the caps into place. Insert the retaining rings and confirm proper alignment between the yoke and driveshaft.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.