···
Log in / Register

What are the functions of the buttons on the Great Wall M4?

4 Answers
StLeonardo
08/26/25 2:44am

Adjust volume, switch songs, one-touch navigation, etc. M4: Born in the Haval M series family and based on the Coolbear platform, it is the third model in the Haval M series following the M1 and M2, inheriting the personalized temperament of the M series family and being a full-fledged compact hardcore SUV. As a crossover model, the Haval M4 has a ground clearance of 185mm, ensuring excellent off-road capability. Configuration: Standard features include Bosch 8.1 version ABS+EBD, collapsible steering column, and 4-door anti-collision steel beams, along with BA emergency brake assist system. It also offers an MP5+GPS+rearview camera system, SD card slot+map card, 4-probe rear parking radar, automatic air conditioning, electric sunroof, front seat heating, and heated mirrors with defrosting function.

Was this review help?
20
4
Share
GabriellaRose
09/08/25 2:45am

The Great Wall M4 boasts a rich array of button functions. On the left side of the steering wheel are volume adjustment and call answer buttons, while the right side features cruise control buttons, allowing you to adjust volume and speed without reaching, enhancing focus while driving. The air conditioning buttons on the center console include a temperature knob and fan speed buttons, with the added ability to switch airflow positions, such as face or foot modes, ensuring a comfortable journey. The multimedia area is equipped with radio tuning buttons, CD playback buttons, and a USB port function, making it convenient for listening to music or navigation. The light switch on the steering column controls high/low beams and fog lights, with a prominent hazard light button for emergencies. Window and door buttons are located on the driver's door handle, featuring one-touch up/down for quick ventilation. These buttons are logically arranged, though initially confusing, they become intuitive after a few days of use. Note that button combinations may vary slightly between different models, so it's best to read the manual or test drive to familiarize yourself. Safe driving relies on mastering these functions to minimize distractions and reduce the risk of accidents.

Was this review help?
4
3
Share
Expand All
StJade
10/22/25 2:45am

When driving my Great Wall M4, I found the button system design to be practical. The steering wheel integrates multifunction buttons such as volume increase/decrease and mute on the left side, and cruise control switch on the right side which automatically maintains speed after activation, making long highway drives effortless. The air conditioning zone buttons include a temperature selection knob, fan strength adjustment, and air outlet mode switching. The central multimedia buttons control radio channels and Bluetooth connection for phone calls. The light control turn signal lever integrates headlight and fog light functions, with the fog light button being crucial for improving visibility in rainy conditions. The window buttons on the door are simple to operate. There is also a trunk release button that is sometimes in a special location, requiring some searching to confirm its position. The buttons have a solid feel with clear feedback, making them easy for beginners to use. It is recommended to test each function one by one while parked to build memory. Regular maintenance includes cleaning the buttons to prevent dust buildup and ensure responsiveness, as safe driving relies on these small control details.

Was this review help?
1
1
Share
Expand All
LeAnnie
12/05/25 3:09am

The buttons in the Great Wall M4 are crucial while driving. The steering wheel shortcuts allow for easy operation of music and phone functions, reducing driver distraction. The air conditioning buttons adjust temperature, fan speed, and ventilation modes. The light switch controls the headlights, high/low beams, and fog lights. The multimedia area buttons provide easy control over audio sources. The window buttons are conveniently placed. The simple layout is beginner-friendly, ensuring focus on the road.

Was this review help?
9
4
Share
Expand All
More Forum Discussions

Does a motor vehicle receive penalty points for violating a prohibition sign?

Yes, penalty points are given. If you see a prohibition sign while driving and still enter the area inside the outer ring road, it is called violating the instructions of the prohibition sign, resulting in a deduction of 3 points. Introduction to prohibition signs: Prohibition signs are signs that prohibit or restrict the traffic behavior of vehicles and pedestrians. Their shape is usually circular, with some being octagonal or equilateral triangles with the vertex pointing downward. Their color is usually white background, red circle, red diagonal bar, and black pattern. Function of prohibition signs: The sign prohibiting motor vehicle entry is one of the no-entry signs, indicating that all types of motor vehicles are prohibited from entering. This sign is placed at the entrance of the road section where motor vehicle traffic is prohibited.
19
3
Share

Can I Deduct Another 6 Points After Having 6 Points Deducted Through Traffic Law Study?

After having 6 points deducted through traffic law study, you cannot obtain additional point deductions through this method. Relevant regulations: According to the rules of point deduction through traffic law study, drivers can accumulate a maximum deduction of 6 points in the current scoring cycle. After deducting 6 points, you must wait until the next scoring cycle to reapply. Accumulating 12 points: According to platform rules, if a driver has two or more full-point records in the current or previous scoring cycle, or has accumulated 12 points, they cannot apply for point deduction through traffic law study. If a driver deducts 6 points through traffic law study and then gets another 6 points deducted, they cannot apply again in the next scoring cycle.
20
0
Share

What are the symptoms of a faulty clutch pump?

It may cause the clutch pedal to not disengage properly or become excessively heavy when pressed, especially during gear shifting. You may experience difficulty in shifting gears, incomplete disengagement, and occasional oil leakage from the slave cylinder. Once the clutch slave cylinder fails, it will most likely require replacement of the entire assembly. Introduction to the clutch pump: The clutch master cylinder and slave cylinder function as two hydraulic cylinders. Working principle of the clutch pump: The master cylinder has two oil pipes, while the slave cylinder has only one. When the clutch pedal is depressed, pressure from the master cylinder is transmitted to the slave cylinder, which then activates. The release fork separates the clutch pressure plate and disc from the flywheel, allowing gear shifting to occur. When the clutch pedal is released, the slave cylinder stops working, allowing the clutch pressure plate and disc to re-engage with the flywheel, thus continuing power transmission. The oil in the slave cylinder then flows back into the reservoir.
4
2
Share

Will Lead-Acid Batteries Reduce Mileage in Winter?

Lead-acid batteries will reduce mileage in winter. Lower temperatures in winter can affect the driving range, but the exact amount of mileage reduction depends on factors such as temperature and usage habits. Below are the relationship between range and temperature and the reasons for the range reduction: Relationship between range and temperature: Generally, for every degree drop in temperature, the battery's capacity decreases by about 1%, leading to a corresponding reduction in range. The specific mileage reduction can be calculated based on the data displayed by the vehicle's onboard computer. Reasons for reduced range in low temperatures: The lower the temperature, the harder it is for the electrolyte in the battery to diffuse, and the slower the chemical reaction rate of the active materials at both electrodes becomes, resulting in a drop in battery voltage.
17
0
Share

What is the correct procedure for jump-starting a car?

The correct procedure for jump-starting a car is: Park both vehicles facing each other and prepare two jumper cables. Open the hoods and connect the positive and negative terminals of both car batteries using the jumper cables—red to positive and black to negative. Start the rescue vehicle and let its engine idle. Attempt to start the stalled vehicle. If the battery is dead, the car should start quickly, and the alternator will begin charging the battery. Precautions for jump-starting: Before connecting the cables, ensure the engine is turned off. Follow the connection steps strictly: connect the positive terminal first, then the negative, and ensure the positive and negative terminals of both cars do not touch. The disconnection sequence is the reverse of the connection sequence—remove the negative cable first, then the positive. When purchasing jumper cables, choose genuine, quality-assured products. Opt for cables with an outer diameter of at least 10mm and a length of around 3 meters.
17
3
Share

Can Temporary License Plates Be Used Across Restricted Zones?

Temporary license plates are restricted to designated zones and cannot be used across zones. New vehicles using temporary plates must not exceed 15 days, and owners should promptly apply for official license plates from the vehicle management authority. Introduction to Temporary License Plates: Automobile temporary license plates refer to provisional vehicle movement permits issued by the public security vehicle management department before formal registration due to pending procedures. Penalties for Using Non-Cross-Zone Temporary Plates Beyond Designated Areas: There are two types of temporary plates: one is restricted to the local jurisdiction, while the other allows inter-provincial travel. Using blue-background temporary plates beyond designated zones may result in vehicle impoundment, fines, and a 12-point deduction. Brown temporary plates, however, permit cross-zone travel.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.