What are the functions of the buttons on the Emgrand driver's door?

1 Answers
HadleyLynn
07/30/25 9:10am
Window control buttons, the main functions are to raise and lower the window glass and one-touch window locking, suitable for driving when all four windows are locked to prevent children from accidentally opening the door. Window button functions: The main functions are to raise and lower the window glass and one-touch window locking, suitable for driving when all four windows are locked to prevent children from accidentally opening the door. Rearview mirror button functions: This button area is located on the driver's door. The rearview mirror automatically folds for narrow road parking to prevent other passing vehicles from scraping the mirrors. The heating button is suitable for rainy or snowy weather to defog the rearview mirrors.
Was this review help?
11
2
Share
More Forum Discussions

Which engine oil is best for reducing engine noise?

For quieter engine operation, fully synthetic oil is recommended. The reasons for using fully synthetic oil are: 1. Synthetic oil has a wider temperature range compared to semi-synthetic and mineral oils; 2. Synthetic oil is less prone to deterioration, has lower evaporation loss, and lasts longer than conventional oil; 3. It offers excellent chemical stability, good radiation resistance, high oil film strength with minimal foaming, providing superior lubrication and reduced wear; 4. Fully synthetic oil has less thermal degradation, saves fuel, and provides better engine protection. The method for changing engine oil is: 1. Lift the vehicle with a jack, locate and loosen the drain plug to drain the oil; 2. After removing the oil filter, place a container underneath; 3. Install a new oil filter and add fresh oil.
16
3
Share

What Causes the Steering Wheel to Suddenly Become Stiff?

There are many reasons why the steering wheel suddenly becomes stiff. Here are the specific details: The reasons why a car's steering wheel suddenly becomes stiffer include: Insufficient tire pressure, contaminated power steering fluid, internal failure of the power steering system, and poor bearing lubrication. How the steering wheel works: Steering wheels are categorized into single-spoke, double-spoke, triple-spoke, and four-spoke designs. Their working principle involves transmitting torque to the rack-and-pinion mechanism, thereby pushing the wheels to turn left or right. Solutions for a car's steering wheel suddenly becoming stiffer: Replenish hydraulic power steering fluid, replace circuit fuses, replace flat bearings, replenish kingpin grease, and add lubricating oil to the steering tie rod ball joints.
8
5
Share

How to turn off the rear wiper of Trumpchi GS4?

The method to turn off the rear wiper of Trumpchi GS4: Pull the lever backward to activate the rear wiper, and move it to the middle OFF position to turn off the rear wiper. Working principle of the rear wiper: By operating the wiper function up and down, front and back, it can adjust the gear and frequency of the front and rear wipers. Trumpchi GS4 offers 7 colors for consumers to choose from, namely Shining Gold, Amber Gold, Mocha Brown, Champagne Gold, Elegant Black, Burgundy Red, and Ivory White. The length, width, and height of Trumpchi GS4 are 4545mm, 1856mm, and 1668mm respectively, with a wheelbase of 2680mm, and the model is positioned as a compact SUV.
11
1
Share

How many points are deducted for crossing the line during a turn?

During a right-angle turn, if any wheel crosses the road edge line, 100 points will be deducted. Below is additional information: Introduction to Right-Angle Turns: A right-angle turn is an assessment point in Subject 2 of the driver's test. It evaluates the driver's ability to correctly maneuver the steering and accurately judge the inner and outer wheel differentials when driving through sharp turns. Below is an introduction to Subject 2 of the driving test: Field driving (Subject 2) involves actual vehicle operation and is graded only as pass or fail. It consists of nine mandatory test items (all without poles), including reversing into a garage, narrow road U-turns, parallel parking, hill starts and stops, right-angle turns, curve driving, emergency braking, tunnels, and toll booth card retrieval. All nine items must be passed to successfully complete Subject 2.
19
0
Share

Which side is the driver's airbag on?

Driver-side airbags are generally installed on the outer side of the seat to mitigate injuries caused by side impacts. Here is relevant information: 1. Many manufacturers equip their models with side airbags for both front seats. In the event of a collision, especially a side impact, these airbags can reduce injuries such as fractures to the arms and ribs of rear passengers near the door by preventing direct hard contact with the door panel. 2. The passenger-side airbag is located in the front part of the passenger seat, on the dashboard above the glove compartment, marked with AIRBAG. The side airbag system is designed to protect occupants during side collisions and vehicle rollovers. It is usually installed on the door. In a severe side collision, the door may deform significantly, making it impossible to open and trapping occupants inside. Side airbags effectively protect drivers and passengers from injuries to the waist, abdomen, outer chest, and arms caused by side impacts, ensuring the mobility and escape capability of the upper body.
14
4
Share

Can 16-inch wheels be changed to 17-inch and registered?

Yes. The following is the relevant introduction about vehicle registration: 1. Introduction one: According to the "Regulations on the Registration of Motor Vehicles": Article 9 Those who apply to change the body color of the motor vehicle, replace the body or frame shall fill in the "Motor Vehicle Change Registration Application Form" and submit legal certificates and vouchers. 2. Introduction two: The vehicle management office shall make a decision to approve or disapprove the change within one day from the date of acceptance. For owners whose changes are approved, the owner of the motor vehicle shall submit the motor vehicle for inspection to the vehicle management office within ten days after the change. 3. Introduction three: The vehicle management office shall confirm the motor vehicle within one day from the date of acceptance, recover the original driving license, and reissue the driving license. For those who replace the body or frame, the vehicle identification code tracing film shall also be checked, and the origin certificate of the body or frame shall be kept.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.