What Are the Functions of the Buttons Inside a Car?

3 Answers
AngelinaFitz
07/28/25 11:43am
Introduction to the functions of various buttons in a car: 1. Fuel Tank Release Button: This button is used to remotely open the fuel tank cap from inside the car. Vehicles equipped with this button allow the driver to open the fuel tank cap from inside. 2. ESP Switch: This is used to turn the vehicle's ESP on or off. The vehicle's ESP system is set to be on by default. For a more direct driving experience, the owner can press this button to turn off the ESP system. 3. Parking Radar Button: This button is used to turn the vehicle's parking radar system on or off as needed. The driver can press this button to manually control the operation of the parking radar. 4. Central Locking Button: This is the control button for the vehicle's central door lock system. The owner can press this button to simultaneously lock or unlock all the doors. 5. Headlight Washer Button: This button is used to control the automatic cleaning function of the headlights. In vehicles equipped with headlight washers, the owner can press this button to activate the headlight washer and spray water to clean the headlights. 6. Rear Sunshade Button: This button is used to control the opening and closing of the electric rear sunshade inside the car. In vehicles equipped with an electric rear sunshade, the owner can press this button to open or close the electric sunshade on the rear window.
Was this review help?
6
3
Share
WyattRose
08/11/25 4:38pm
I always enjoy exploring the various small buttons in the car while driving. The most frequently used ones are in the air conditioning zone—the left knob adjusts the temperature, the right one controls the fan speed, and the middle button directs the airflow. To defrost the front windshield, just press the button with the扇形 symbol. On the left side of the steering wheel, you’ll usually find the cruise control button; pressing SET on the highway maintains your speed. The multimedia buttons on the right make it easy to skip tracks or adjust the volume. The area around the gear shift is interesting—the electronic parking brake is a button marked with a P, and the auto start-stop usually has a circular arrow symbol. Window controls are all on the door armrest, with the button marked with an X for the window lock function. The rear seats have air vent adjustment knobs—remember to set a higher temperature for elderly passengers. Below the center console screen, there’s a hazard light triangle button and a drive mode selector; switching to snow mode in rainy or snowy weather is quite helpful. Some cars even have an SOS emergency call button near the reading light—hopefully, it’ll never be used!
Was this review help?
18
2
Share
Expand All
LeColton
09/28/25 5:49am
When my friend first bought a car and asked about button functions, I walked him through each one. The start button requires pressing the brake pedal; otherwise, it only powers on. The light control stalk is on the left side of the steering wheel—twist once for parking lights, twice for low beams, and push forward for high beams. The wiper stalk is on the right side; flicking it upward increases the speed. The dashboard has various icons: an arrow inside the car indicates recirculation, a car with curves represents lane keeping, and one with a seat stands for heating/ventilation. The paddles behind the steering wheel are for gear shifts, activated only in manual mode. The overhead buttons include reading lights and the sunroof switch—holding it down opens it fully. Near the seatbelt buckle, you’ll often find memory seat buttons, super handy for households with multiple drivers. I advise new owners to read the manual since button layouts vary significantly across brands.
Was this review help?
10
2
Share
Expand All
More Forum Discussions

How to Reset the Maintenance Light on a Changan Suzuki SX4?

The method to reset the maintenance light on a Changan Suzuki SX4 is as follows: 1. Insert the car key and start the vehicle; 2. Rotate the left knob on the center console until the maintenance reminder light starts flashing; 3. Press the left knob and stop rotating when you hear a beep, at which point the maintenance reminder light on the dashboard will reset. The Changan Suzuki SX4 is a compact sedan equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 109 PS and a maximum torque of 144 Nm. The car's dimensions are 4135mm in length, 1755mm in width, and 1605mm in height, with a wheelbase of 2500mm, and it comes with a 5-speed manual transmission.
11
4
Share

Where to Add Windshield Washer Fluid in the Lamando?

The windshield washer fluid reservoir in the Lamando is located next to the engine. On the left side of the engine compartment, there is a small blue-capped container with a windshield spray symbol on its lid - this is the washer fluid reservoir. Simply open it and pour in the windshield washer fluid. Windshield washer fluid, commonly known as car windshield cleaning liquid, is a consumable automotive product. It serves as a specialized liquid for cleaning vehicle windshields, offering functions such as cleaning, anti-fogging, anti-static, lubrication, and corrosion prevention. The Lamando is a compact car under SAIC Volkswagen, with dimensions of 4599mm in length, 1826mm in width, and 1425mm in height, and a wheelbase of 2656mm. It is equipped with either EA888 TSI or EA211 TSI engines and uses a wet 7-speed dual-clutch transmission.
5
0
Share

How Much Battery Repair Fluid Is Most Appropriate to Add?

Adding 8 to 10ML of battery repair fluid is quite appropriate. Scope of Application for Battery Repair Fluid: Some failed batteries can be repaired by adding repair fluid, while others with severe issues may need to be scrapped. According to the national standard for electric vehicle batteries (JB/T10262-2001), batteries with a capacity below 70% of the nominal capacity are considered failed. Introduction to Battery Repair Fluid: Battery repair fluid, also known as lead-acid battery repair fluid, battery activator, or battery capacity enhancer, is a solution added to failed electric vehicle batteries. It can restore battery capacity, extend battery life, and improve various battery performances. It does not require professional repair equipment and is simple and easy to operate. Due to the different compositions of repair fluids, their repair effects also vary.
16
5
Share

What is the name of the block behind the parking space?

The block behind the parking space is called a wheel stopper. Introduction to rubber wheel stoppers: Rubber wheel stoppers, also known as wheel chocks, reverse pads, stoppers, or parking blocks, are made from high-strength natural rubber through vulcanization and high-pressure synthesis. They have excellent compression resistance and a certain degree of softness in the slope. Function of rubber wheel stoppers: Rubber wheel stoppers are mainly used in parking lots and garages to ensure accurate and orderly parking, reduce vibrations, and prevent collisions. They are suitable for underground parking lots and are commonly used in large public parking lots, residential garages or underground parking lots, dedicated parking spaces in factories or units, and open parking spaces. Their purpose is to prevent collisions between vehicles or between vehicles and other objects during parking.
7
5
Share

Is Battery Depletion Covered Under Warranty?

Battery depletion is covered under warranty. Battery Introduction: A battery is a type of cell, also known as a storage battery, which works by converting chemical energy into electrical energy. The common battery refers to a lead-acid battery, mainly composed of lead and its oxides as electrodes and a sulfuric acid solution as the electrolyte. Battery Working Principle: It uses a lead plate filled with sponge-like lead as the negative electrode, a lead plate filled with lead dioxide as the positive electrode, and a 22-28% dilute sulfuric acid solution as the electrolyte. During charging, electrical energy is converted into chemical energy, and during discharging, chemical energy is converted back into electrical energy. When the battery discharges, metallic lead acts as the negative electrode, undergoing oxidation to form lead sulfate; lead dioxide acts as the positive electrode, undergoing reduction to also form lead sulfate.
8
3
Share

How to use the dashcam on Mercedes-Benz E300L?

Press the power ON/OFF button or connect the charger, the dashcam will automatically enter the recording mode and start recording, with the blue indicator light flashing. After powering on, press the MODE key to select and enter the photo mode, then press REC/SNAP to take photos. Press the MENU key to enter the submenu. After powering on, press the MODE key to select and enter the preview mode, press UP or DOWN to select video or photo files, and press MODE to exit preview. Press once to rotate the screen, press twice to enter screensaver mode, and press again to return to normal state. In playback mode, press the menu key to delete the interface, then press the recording key to enter the selection interface for deleting "single/all/selected", and press the REC key to delete.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.