What are the functions of the buttons in the Tiggo 7?

Does the odoff light indicate fuel saving or fuel consumption?

When the odoff light is on, it indicates fuel saving. The light signifies that the engine auto start-stop system is active, which significantly saves fuel for the engine. Compared to the fuel consumption per 100 kilometers, it can save at least one to two liters, but the exact amount depends on the vehicle model. Introduction to the car's od key: 1. When quick overtaking is needed, pressing the od key drops the gear to 3rd, increasing engine speed and torque, allowing for faster acceleration when stepping on the throttle. 2. When driving at low speeds in congested urban areas, activating odoff limits the transmission to gears within 3rd, reducing unnecessary switching of internal shift solenoids, while keeping the vehicle in a lower gear also aids in acceleration. 3. When the vehicle is going downhill, activating odoff limits the transmission to gears within 3rd, utilizing engine braking to assist in slowing down and reducing the need to apply the brakes.

13

5

Share

What to Do When Your Car Won't Start Due to Dead Battery?

Here are the solutions for a car that won't start due to a dead battery: 1. Push-start the car manually. 2. Replace the car battery. 3. Recharge the battery. 4. Jump-start the car with jumper cables, ensuring positive to positive and negative to negative connections. 5. Use another vehicle to tow-start the car. Additional information on the effects of a depleted car battery: 1. Battery depletion shortens the battery's lifespan. 2. It prevents the car from starting and causes electrical devices in the car to malfunction. 3. Starting attempts may result in loss of data in the vehicle's control modules, leading to operational failure. 4. It causes overheating of the starter motor, reducing its lifespan. 5. Prolonged battery depletion can damage the alternator.

6

5

Share

What are the differences between high-end and standard car configurations?

The most obvious difference between high-end and standard car configurations is that, for the same displacement, the price of the high-end version is higher than that of the standard version. The high-end model has richer configurations compared to the standard model. Below is an introduction to car configurations: 1. Car configurations generally include basic configurations, safety configurations, driving assistance configurations, external configurations, internal configurations, and information and entertainment configurations. Basic configurations focus on three main components: the engine, transmission, and chassis. 2. The engine typically depends on parameters such as displacement, torque, number of cylinders, environmental standards, power, naturally aspirated or turbocharged, etc. Normally, for the same engine type, the larger the displacement, the stronger the power and torque, the better the driving quality, the more cylinders (within the engine's capacity range), the newer the environmental standards, and the better the power output. 3. Transmissions include DCT, AT, MT, and CVT. AT transmissions are relatively older but have strong reliability. Choosing AT and CVT is usually more practical. 4. The chassis is generally divided into independent suspension and non-independent suspension. Independent suspension is certainly superior to non-independent suspension, but the price will be relatively higher.

12

4

Share

What does the EPC fault code mean?

The display of EPC in a car indicates a fault in the engine power control management system. The reasons for the EPC display in a car are as follows: 1. In most cases, the EPC display is caused by a dirty electronic throttle or excessive carbon deposits. 2. Other possible reasons include the use of substandard fuel, a malfunction in the ECU (engine control unit), or insufficient car battery power. More information about EPC is as follows: 1. EPC stands for Electronic-Power-Control (full name: Engine Electronic Stability System), also known as the electronic throttle. 2. This system consists of components such as sensors and controllers.

13

5

Share

How to Adjust the Seat Belt of a Child Safety Seat?

Child safety seat belt adjustment method: Press the adjuster button and pull the seat belt to adjust it to the appropriate length. The seat belt of the safety seat is set according to the age and size of the baby. If the baby is smaller, the seat belt can be tightened a bit. Below is a detailed introduction to the adjustment method: 1. Determine the installation method based on the baby's condition—use rear-facing for babies under 8 kg and forward-facing for those over 18 kg. 2. For forward-facing installation, the seat faces the direction of the car's movement, and the backrest angle is adjusted to the first or second gear; for rear-facing installation, the seat faces away from the direction of the car's movement, and the backrest angle is adjusted to the third gear. 3. Pull the seat belt through, insert the waist belt into the installation guide slot, and insert the shoulder belt into the upper guide slot. 4. Thread the waist belt around the bottom of the safety seat and snap it into the rear-facing installation guide slot on the other side. 5. Insert the seat belt buckle into the latch and tighten the seat belt immediately.

15

2

Share

What is the emission standard for a 2008 car?

2008 cars could have either China II, China III, or China IV emission standards. To accurately determine the emission standard of a specific 2008 model, you need to know the brand and model of the car. Below are methods to check a car's emission standard: 1. Check the vehicle's environmental protection label, which has clear markings on the back. 2. The registration certificate states the car's emission standard. 3. The label on the windshield. 4. Inquire at the vehicle management office's environmental protection window or the local motor vehicle pollution management center. 5. The vehicle's factory certificate. Additional information on the basic status of car emission standards: Cars manufactured before 2005 are mostly China II; cars before 2007 are mostly below China IV, i.e., China III or China II; most cars after 2008 are China IV; some cars in 2014 are China V, while others are China IV; most cars after 2015 are China V.

4

Share

What are the functions of the buttons in the Tiggo 7?

Does the odoff light indicate fuel saving or fuel consumption?

What to Do When Your Car Won't Start Due to Dead Battery?

What are the differences between high-end and standard car configurations?

What does the EPC fault code mean?

How to Adjust the Seat Belt of a Child Safety Seat?

What is the emission standard for a 2008 car?

Is the M gear for climbing hills or high speed?

How to Write the Letter for China V?

What is the principle of the crankshaft position sensor in a car?

How long does a PDI inspection take?