What are the functions of the BMW display key?

What is the function of the fuel pressure valve?

The function of the fuel pressure valve is: 1. To regulate the fuel pressure in the fuel supply system, maintaining a constant pressure difference between the system fuel pressure and the intake manifold pressure; 2. To buffer the pressure pulsations generated by the fuel pump during fuel supply and the pressure fluctuations caused by intermittent fuel injection from the injectors. The fuel pressure valve is also known as the fuel pressure regulator. The automotive fuel pressure regulator is a component of modern vehicles, belonging to the fuel supply system of electronically controlled engines, and is typically installed on the return pipe side of the fuel rail. The working principle of the fuel pressure regulator is that when the fuel pressure exceeds the standard value, high-pressure fuel pushes the diaphragm upward, opening the ball valve, and excess fuel flows back to the fuel tank through the return pipe. When the pressure falls below the standard value, the spring presses the diaphragm downward to close the ball valve, stopping the return flow.

8

5

Share

How to Reset the Maintenance Reminder on the Tiguan L?

The steps to reset the maintenance reminder on the Tiguan L are as follows: 1. Turn off the engine and press the trip meter reset button located below the tachometer. 2. Turn the ignition switch to the ON position and release the trip meter reset button; the SERVICE indicator will appear on the display. 3. Rotate the minute button on the clock to the right until the mileage appears on the display. 4. Turn off the engine to reset the reminder message, then turn the ignition switch to the ON position again, and the SERVICE indicator will disappear. The SERVICE indicator on the instrument panel is a maintenance cycle indicator. When the ignition switch is in the ON position, the SERVICE indicator will flash, and it will disappear after starting the engine, indicating that the vehicle requires maintenance. After maintenance, the maintenance light should be reset. In terms of body dimensions, the Tiguan L measures 4712 mm in length, 1839 mm in width, and 1673 mm in height, with a wheelbase of 2791 mm.

5

4

Share

Should the BMW 3 Series use 95 or 92 octane gasoline?

BMW 3 Series uses 95 octane gasoline. If 95 octane gasoline is unavailable, 92 octane gasoline can be used as an emergency measure, but this is only permissible when driving at medium engine speeds and under low engine load. Here is some additional information: 95 octane gasoline consists of 95% isooctane and 3% n-heptane. High-octane gasoline should be used in engines with high compression ratios. BMW is a German luxury car brand, with model series including i, X, Z, and pure numeric models, as well as the M series, which is based on improvements to these series. The BMW 3 Series has a body weight of 1,465 kilograms, is equipped with an inline 4-cylinder gasoline engine, and has dimensions of 4,734mm in length, 1,811mm in width, and 1,455mm in height. BMW was founded in 1916 and is headquartered in Munich, Bavaria, Germany.

20

1

Share

How many seconds does the BMW 530 take to accelerate from 0 to 100 km/h?

BMW 530 takes 7.18 seconds to accelerate from 0 to 100 km/h. Factors affecting the 0-100 km/h acceleration time: The influencing factors of 0-100 km/h acceleration time include: engine power and torque, engine power output curve characteristics, transmission, vehicle weight, tuning orientation, tuning capability, drag coefficient, tires, etc. Differences in these factors will all affect the 0-100 km/h acceleration time. The 0-100 km/h acceleration time is one of the main indicators of a vehicle's dynamic performance, but it is not an indicator of the engine's performance alone. Vehicle 0-100 km/h acceleration: 0-100 km/h acceleration refers to the time it takes for a car to accelerate from 0 km/h to 100 km/h, which is the most intuitive reflection of a car's power. Together with the maximum gradeability and maximum speed, it constitutes the evaluation indicators of a vehicle's dynamic performance.

15

1

Share

What are the reasons for the weak airflow from the air vents in a BMW 3 Series?

The reasons for the weak airflow from the air vents in a BMW 3 Series are as follows: Incorrect air direction selection: If the air direction is set to blow towards the front windshield, it will significantly reduce the airflow. Blower motor malfunction: Common issues with the blower motor include failure to operate, abnormal noise, short circuit, or insufficient power. When the blower motor malfunctions, the cold air from the vehicle's evaporator cannot be distributed, leading to evaporator icing and ultimately affecting the normal operation of the car's air conditioning. Condenser or evaporator blockage: If the condenser's exterior or evaporator is clogged with debris such as catkins or dust, it will impair the condenser's efficiency, ultimately affecting the car's cooling performance. Additionally, excessive dirt on the evaporator's surface can easily degrade the air conditioning's cooling effect. Dirty air filter: If the car's air filter is excessively dirty, it can obstruct the airflow, allowing only a portion of the air to enter the cabin, which naturally results in a noticeable reduction in airflow.

13

5

Share

Why is the BMW 535i Rarely Seen?

BMW 535i is priced high. The following is additional information: Currently, the price of the BMW 5 Series is much lower than that of the BMW 535i. At the price of a 535i, one could consider the BMW 7 Series. The cost-performance ratio is relatively low, and the exterior of this car is no different from that of the Brilliance BMW. It features the same angel-eye headlights and kidney grille, with identical body dimensions, making it hard to distinguish without looking at the rear badge. The 535i is an imported model, while the 535Li is the extended version produced by Brilliance. Apart from both being part of the 5 Series, the two models differ in length, wheelbase, craftsmanship, quality, and configuration. Comparatively, the domestic version offers more configurations than the imported one. Moreover, the cost of owning an imported car is significantly higher than that of a domestic one, including expenses like insurance, maintenance, and repairs.

12

4

Share

What are the functions of the BMW display key?

What is the function of the fuel pressure valve?

How to Reset the Maintenance Reminder on the Tiguan L?

Should the BMW 3 Series use 95 or 92 octane gasoline?

How many seconds does the BMW 530 take to accelerate from 0 to 100 km/h?

What are the reasons for the weak airflow from the air vents in a BMW 3 Series?

Why is the BMW 535i Rarely Seen?

What is the lifespan of Volkswagen's 7-speed wet dual-clutch transmission?

Can the BMW 3 Series Continue Driving with Coolant Warning?

What does the gforce on the Mercedes dashboard mean?

Why does the BMW 3 Series suddenly prompt to add coolant?