···
Log in / Register

What are the functions of the Baojun 730 remote key?

3 Answers
IsabelaAnn
09/05/25 4:01am
Baojun 730 remote key functions: 1. Press the lock button once to lock all doors. 2. Press the unlock button once to unlock all doors. 3. Press and hold the unlock button to open the electric sunroof and windows. However, pressing and holding the lock button cannot close the sunroof and windows. 4. Press and hold the middle trunk button to open the trunk. Additional information: The Baojun 730 is a family MPV product under SAIC-GM-Wuling Baojun.
Was this review help?
5
4
Share
DelLuke
09/17/25 4:36am
I've been driving the Baojun 730 for a while, and the most basic function of the remote key is to unlock the doors. With just a press of the button, the doors open automatically, which is especially convenient when my hands are full or during rainy days when I don't have to fumble for the keyhole. Another button is for locking the car—a single press locks all doors, and the car lights flash twice as confirmation, eliminating the risk of forgetting to lock the car. There's also a dedicated button for the trunk; pressing it pops the trunk open, making loading luggage super easy. The key might also have a car-finder button—pressing it makes the lights flash or the horn sound when you can't locate your car, which is very handy in crowded parking lots. The battery is a CR2032 coin cell, which needs replacement every year or two; otherwise, the key's responsiveness suffers. The overall design is simple and user-friendly, making daily commutes much easier. However, avoid exposing it to high temperatures or water, as these can interfere with the signal.
Was this review help?
11
3
Share
Expand All
DelFelix
10/31/25 5:05am
The Baojun 730's remote key controls the car lock system via wireless signals. Pressing the buttons sends RF signals to the vehicle's receiver, enabling automatic operation. Core functions include three buttons: the unlock button remotely opens doors; the lock button one-touch locks with light feedback; the trunk button easily opens the rear compartment. Some premium models may support remote engine start, but the base version lacks this. The signal range is effective within 20 meters, with a car-finding mode that flashes lights or honks to assist location. For maintenance, the key battery is easy to replace—use standard CR2032 for low cost. Signal interference is rare, though delays may occur in areas with many electronic devices; simply move closer and press again. The remote key also integrates with the anti-theft system, encrypting each transmission to prevent hacking, making driving smarter with simple reliability.
Was this review help?
20
4
Share
Expand All
More Forum Discussions

Where is the air conditioning switch for the 2008 Audi A6L?

The air conditioning switch for the 2008 Audi A6L is located directly below the center console area, specifically the AUTO button beneath the multimedia system. Select the appropriate air conditioning fan speed: During normal vehicle operation, to prevent excessive frosting of the evaporator and ensure the proper functioning of the air conditioning system, the fan speed and temperature control should not be set to the lowest settings for prolonged periods. When the vehicle speed is below 25 km/h, the fan speed switch should be set to the low-speed setting to avoid insufficient power generation and inadequate cooling. Duration of single air conditioning use: If the interior temperature has reached a comfortable level, the air conditioning can be turned off or intermittently used. Prolonged use of the air conditioning can lead to excessive pressure on the condenser, causing wear and tear on the refrigeration system. Therefore, it is advisable not to use the air conditioning for extended periods at a time.
19
3
Share

What is the reason why the fuel gauge of Mercedes-Benz C does not drop?

The reason why the fuel gauge of Mercedes-Benz C does not drop is that the float in the fuel tank is stuck, and it can be adjusted and repaired. Do not overfill the fuel tank: Overfilling the fuel tank can easily block the vent hole of the fuel tank. Once the vent hole is blocked, the air pressure inside the fuel tank will be lower than normal, causing poor fuel supply or even no fuel supply. Overfilling the fuel tank also increases the weight of the car, thereby increasing fuel consumption. The gasoline may also deteriorate, posing a safety hazard to the car. Try to avoid waiting for the warning to refuel: When driving, always pay attention to the fuel gauge. When the pointer shows that there is only a quarter of the fuel left, you should refuel. If the fuel tank is empty for too long, the temperature difference between the inside and outside will be large, and moisture is likely to form inside the fuel tank, which will corrode the fuel tank, affect the fuel quality, and increase the burden on the engine.
14
1
Share

What is the Launch Mode of the Geely Xingyue?

Geely Xingyue's launch mode is: the launch start configuration equipped in the Xingyue. In terms of configuration: The Geely Xingyue is fully equipped, including launch mode, AGS intelligent variable intake grille, DP-EPS electronic steering, rear multi-link independent suspension, and many other cross-level configurations. In terms of power: The Geely Xingyue is equipped with a 2.0T engine identical to that of the Volvo XC90, paired with an 8AT automatic manual transmission. The maximum horsepower is estimated to reach 254 hp, and it is equipped with a Volvo-branded real-time four-wheel drive system. It features BorgWarner's fifth-generation electro-hydraulic four-wheel drive system, which is more lightweight in construction and can intelligently switch between four-wheel drive and two-wheel drive.
18
5
Share

What are the effects of BMW FlexRay communication failure?

The effects of BMW FlexRay communication failure are: it may cut off communication between control units or the entire branch and the bus. Introduction to FlexRay: FlexRay is a brand-new bus system and communication system, with a maximum data transmission rate of 10MBit/s per channel, making FlexRay a very high-speed communication system. FlexRay is a high-speed, deterministic, and fault-tolerant bus technology for automobiles, which combines event-triggered and time-triggered methods, featuring high network utilization and system flexibility. It can serve as the backbone network for the next generation of automotive internal networks. Scope of application of FlexRay: FlexRay can be applied in passive bus and star network topologies, as well as in a combination of both topologies. Both topologies support dual-channel ECUs, which integrate multiple system-level functions to save production costs and reduce complexity.
11
5
Share

What does the blue English letter 'E' followed by a string of characters mean on the BMW 3 Series?

The blue English letter 'E' followed by a string of characters on the BMW 3 Series means: BMW Brake Energy Regeneration System. Exterior of the BMW 3 Series: The new BMW 3 Series largely retains the design style of the overseas version, featuring sharp LED headlights connected to an enlarged glossy black kidney grille, complemented by front air intakes and three-dimensional lines. The rear features a straight and sharp taillight design with L-shaped red light strips inside. Powertrain of the BMW 3 Series: The long-wheelbase version of the new BMW 3 Series is equipped with the latest B-series 2.0T engine, delivering the same 184 horsepower as the current 320i/Li, but with the tail badge changed to 325Li. The transmission remains an 8-speed automatic gearbox.
3
4
Share

What grade of fuel should a Volkswagen Tiguan use?

Volkswagen Tiguan should use 95-octane gasoline. Avoid overfilling the fuel tank: Overfilling the fuel tank can easily block the vent hole of the tank. Once the vent hole is blocked, the air pressure inside the tank will drop below normal, leading to poor fuel supply or even a complete failure to supply fuel. Overfilling also increases the vehicle's weight, thereby increasing fuel consumption. Additionally, gasoline can deteriorate, posing potential safety hazards. Avoid waiting for the low fuel warning before refueling: While driving, always monitor the fuel gauge. When the gauge indicates that only a quarter of the fuel remains, it's time to refuel. If the tank remains empty for too long, the temperature difference between the inside and outside can cause condensation inside the tank. This moisture can corrode the tank, degrade fuel quality, and increase the engine's workload.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.