What are the functions of L2.5 autonomous driving?

1 Answers
LaNaomi
07/25/25 10:12am
L2.5 autonomous driving not only includes ACC adaptive cruise control system, LKA lane keeping assist, and AEB autonomous emergency braking system, but also enables the vehicle to perform more actions such as steering and lane changing, allowing the vehicle to follow a pre-set route under specific conditions. Additional information: 1. The classification method widely adopted globally for autonomous driving technology is established by SAE, which divides the technology into 6 levels from L0 to L5, indicating an increasing level of autonomous driving capability from level 0 to level 5. 2. L2.5 autonomous driving refers to a sub-level or transitional stage between L2 and L3. This means the vehicle's equipped functions exceed L2 but have not yet reached L3, or it can achieve full autonomous driving on certain specific road sections (limited to a few specific sections, and the driver still needs to monitor in real time).
Was this review help?
9
4
Share
More Forum Discussions

What is the technique for shifting gears on a motorcycle without using the clutch?

Clutchless shifting involves quickly flicking the gear lever during the moment of rapid throttle release, engaging the gear, and then promptly reapplying throttle to maintain smooth power delivery. Below are the relevant details: 1. Introduction: Clutchless shifting is one of the fundamental riding techniques for motorcycles. As the name suggests, it means shifting gears without pulling the clutch lever. With fewer steps involved, clutchless shifting reduces the time gap between gear changes, minimizing power loss and resulting in a smoother and quicker ride. 2. Risks: These three actions are completed in a very short time and are almost simultaneous. Mastering this technique requires extensive practice to get the shifting rhythm right. Proper clutchless shifting should feel seamless and cause no harm to the vehicle. However, if the operation is not precise enough, it can lead to strong jerking sensations and potential damage to the gear teeth.
19
0
Share

What was the old name of the Kia Optima?

The old name of the Kia Optima was Kia Optima (OPTIMA). Here is an introduction to the Kia Optima: 1. Introduction: The Kia Optima is a mid-size four-door sedan produced by Kia Motors. 2. Exterior: The Optima SX is equipped with daytime running lights, additional chrome trim, red brake calipers, and exclusive 18-inch alloy wheels for the SX model. 3. Interior: The seats are wrapped in Nappa leather and come with real wood trim. 4. Powertrain: The Optima SX is powered by a 2.0T direct-injection turbocharged engine, the same as the one in the Sonata, with a maximum power output of 274 horsepower and a maximum torque of 364 N·m.
9
0
Share

What are the exterior differences between the A3 and S3?

Here are the exterior differences between the Audi A3 and S3: 1. Audi S3: The S3 comes with a sporty body kit, featuring an aluminum lower lip below the front grille. The front grille is replaced with aluminum metal strips bearing the "S3" logo, while the sharp lines of the rear taillights give the car a more rugged and sporty appearance. The deep yet vibrant Sepang Blue body color offers a pure and striking impression. 2. Audi A3: The A3 inherits the design language of the new generation of Audi products, with a redesigned front end featuring a shield-shaped grille. The lighting elements add a more dynamic touch, giving the A3 a confident look. The rear hatch has smoother and simpler lines, showcasing a balance between aerodynamics and aesthetic design, while also providing better headroom.
6
4
Share

What is the difference between Nardo Gray and Crystal Nardo Gray?

Crystal Nardo Gray has a density of 1000, while Nardo Gray has a density of 1100, with the difference lying in their densities. Below are detailed introductions to both: 1. Nardo Gray: Nardo Gray is the original factory color of the Audi RS series, and many people easily confuse it with cement gray. In fact, there are some differences between them. Compared to the deep tone of cement gray, Nardo Gray appears brighter and more vibrant. Gray easily creates a sense of simplicity and subtlety, and Nardo Gray is a shade within the gray spectrum that doesn't feel oppressive, making it a favorite among many car owners. 2. Crystal Nardo Gray: Crystal Nardo Gray clearly outlines the original body lines, bringing a low-key yet luxurious beauty, effortlessly creating Nardo Gray's cool and sophisticated color tone. The crystal-like film effect makes this unique shade of gray appear particularly bright, elegant, and exquisitely refined, giving the car's surface a slightly rational and cold industrial style, making the entire vehicle look both soft and pleasing to the eye.
19
0
Share

Detailed Explanation of X-Trail 4WD Mode Usage

Detailed explanation of X-Trail 4WD mode usage is as follows: 1. 2WD Mode: Operates in front-wheel drive state, suitable for driving on smooth highways or urban roads, demonstrating better fuel economy. 2. AUTO Mode: Automatically adjusts front/rear wheel torque distribution between 100:0 to 50:50 through electronic sensing control according to road conditions, suitable for complex terrain in suburban areas. 3. LOCK Mode: Select this mode when facing muddy or rough road conditions. The system will fix the front/rear wheel torque distribution at approximately 50:50 to ensure safe and stable vehicle operation.
12
2
Share

How Does a Motorcycle Muffler Reduce Noise?

Motorcycle mufflers primarily utilize sound wave interference for noise reduction. A baffle is installed at the rear of the muffler to split the sound waves, which then converge into a single pipe at the exit. This process interferes with the sound, causing the rarefaction and compression phases of the sound waves to overlap and cancel each other out. Here is additional information: 1. Muffler Introduction: A motorcycle muffler is a device that allows airflow while attenuating noise, serving as one of the essential components on a motorcycle. 2. Motorcycle Maintenance: After washing the motorcycle, use a dry cloth to wipe the entire vehicle dry, especially areas such as the ignition switch, instrument panel, left and right handlebars, spark plug, and fuel tank cap. Pay special attention to removing the spark plug cap and shaking it several times to expel any water trapped in the sleeve, as failure to do so may affect ignition.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.