What are the functions of fuel additive?

1 Answers
CharlotteAnn
07/30/25 7:58am
Here are the functions of fuel additive: 1. Clean the fuel system. After continuous use, carbon deposits on the exhaust pipe are significantly reduced, and the filter, exhaust valve, fuel system, etc. are very clean. 2. Enhance power performance. It causes secondary atomization of fuel, leading to complete combustion and improving engine power. 3. Improve atomization. It increases thermal efficiency and reduces fuel consumption. 4. Protect the engine. It has functions such as anti-oxidation, cleaning, dispersion, demulsification, anti-corrosion, and lubrication. 5. Reduce wear. It lowers engine noise and extends the engine's service life. 6. Reduce emissions. Gasoline additives can effectively reduce the activation energy of combustion, allowing non-combustible colloids in the fuel to fully burn. Fuel additive, commonly known as gasoline additive or fuel additive, is designed to compensate for certain deficiencies in gasoline and endow it with new excellent characteristics. It has effects such as cleaning system carbon deposits, increasing octane number, improving atomization, reducing wear, and protecting the engine.
Was this review help?
15
5
Share
More Forum Discussions

Can a Class C License Drive a 9-Seater?

A Class C license can drive a 9-seater commercial vehicle or a 9-seater minivan, but it cannot drive vehicles with more than 9 seats. There are a total of 15 categories of driver's licenses, which are A1, A2, A3, B1, B2, C1, C2, C3, C4, D, E, F, M, N, and P. Below is a detailed introduction to the driver's license categories: 1. A1 is for large buses, A2 for tractors, A3 for city buses, B1 for medium-sized buses, B2 for large trucks, C1 for small cars, C2 for small automatic transmission cars, C3 for low-speed trucks, C4 for three-wheeled cars, D for regular three-wheeled motorcycles, E for regular two-wheeled motorcycles, F for light motorcycles, N for trolleybuses, and P for trams. 2. An A1 license can also drive A3, B1, B2, C1, C2, C3, C4, and M vehicle types. An A2 license can also drive B1, B2, C1, C2, C3, C4, and M vehicle types. An A3 license can also drive C1, C2, C3, and C4 vehicle types. A B1 license can also drive C1, C2, C3, C4, and M vehicle types. A B2 license can also drive C1, C2, C3, C4, and M vehicle types. A C1 license can also drive C2, C3, and C4 vehicle types. A C3 license can also drive C4 vehicle types.
13
4
Share

What is the definition of tire specifications?

The parameters displayed on tire specifications represent the tire width, aspect ratio, maximum speed the tire can withstand, tire type, and applicable tire size. The functions of tires are as follows: 1. Support the entire weight of the vehicle and bear the load of the car. 2. Transmit traction and braking torque, ensuring the adhesion between the wheels and the road surface. 3. Reduce and absorb vibrations and impact forces during driving, preventing severe vibrations and premature damage to automotive components. 4. Adapt to the high-speed performance of the vehicle and reduce noise during driving, ensuring driving safety, handling stability, comfort, and energy-saving economy.
5
1
Share

What are the symptoms of a damaged lower control arm ball joint?

Lower control arm ball joint, also known as a universal joint, refers to a mechanical structure that uses a spherical connection to achieve power transmission between different axes. The lower control arm is the connecting mechanism between the frame and the wheel, and its main function is to guide and support the suspension. If the lower control arm ball joint is damaged, the following symptoms may occur: 1. Abnormal noise from the chassis when steering, caused by excessive movement due to looseness. 2. A damaged lower control arm ball joint can also cause abnormal noise and shaking when braking. 3. Abnormal noise from the chassis when passing over speed bumps, caused by random collisions due to the loosened lower control arm ball joint.
11
4
Share

Why doesn't the car battery hold a charge?

The reasons why a car battery doesn't hold a charge are as follows: 1. Battery aging or damage. 2. Aging of the generator belt. Functions of the battery: 1. When starting the engine, the battery supplies power to the starting system, ignition system, and electronic fuel injection system. 2. When the engine is stopped or at low idle, it powers the vehicle's electrical equipment. 3. It can assist in supplying power to electrical equipment when the generator output is insufficient. 4. It mitigates voltage surges in the electrical system, protecting the vehicle's electronic devices. 5. It can store excess electricity generated by the alternator.
11
1
Share

Where Can I Purchase Car Modification Parts?

There are many channels for purchasing car modification parts, such as modification part agents, from whom you can buy modification parts, or you can purchase them directly from overseas. Car parts are the various units that make up the entire car and products that serve the car. There are many types of car parts, and as people's living standards improve, their consumption of cars increases, making the car parts market grow larger. Below is relevant information on selecting car parts: 1. Check the packaging: Genuine parts usually have standardized packaging with uniform specifications and clear, regular printing, while counterfeit products often have poorly printed packaging that can easily reveal flaws. 2. Check the color: Some genuine parts have a specific designated color on the surface; if you encounter other colors, they are likely counterfeit or substandard parts. 3. Check the appearance: Genuine parts have clear and regular printing, casting, or markings, while counterfeit products have rough appearances. 4. Check the paint: Unscrupulous merchants may refurbish old or used parts with simple processes like disassembly, assembly, piecing together, or repainting, then sell them as qualified products to illegally obtain high profits. 5. Check the material: Genuine parts use qualified materials as per design requirements, while counterfeit products often use cheap and inferior substitutes.
1
0
Share

What does 'media' mean in cars?

In cars, 'media' refers to the multimedia audio and video playback function, commonly understood as the capability to play audio and video files, which is part of the car's entertainment features. Generally, pressing the 'MEDIA' button will directly take you to the relevant interface to use the multimedia player. Nowadays, most cars allow all operations to be performed through the central control screen, much like operating a smartphone or tablet. A car audio system typically consists of four main components: the source unit, which includes front-mounted hosts (installed on the dashboard) that provide radio, cassette, CD, VCD, MD, MP3, DVD, and TV playback, as well as rear-mounted CD, VCD, and DVD changers (installed in the trunk). In recent years, this has expanded to include digital media such as USB, HD, Memory Stick, and iPod. The amplification section usually refers to the power amplifier that processes and amplifies signals from different audio and video sources, including pre-amplifiers and post-amplifiers. The speaker section typically includes front and rear field speakers and mid-low frequency speakers. The wiring section usually comprises signal cables, speaker wires, and power cables.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.