What are the functions of front windshield film?

1 Answers
PenelopeMarie
07/30/25 3:40am
The functions of front windshield film: 1. Anti-explosion function. Since the front windshield of a car is tempered safety glass, the film can keep broken glass fragments in place after the glass shatters, preventing personal injury to passengers caused by flying glass; 2. UV protection and sun protection. The front windshield has a large heat-receiving area and is exposed to more UV radiation. The film can effectively block solar radiation and protect the health of drivers and passengers; 3. Anti-glare. Both sunlight and oncoming vehicle headlights at night can produce dazzling glare. The film can reduce external glaring light; 4. Thermal insulation function. The film can block part of the heat, making the air conditioning cooling effect more noticeable in summer.
Was this review help?
9
0
Share
More Forum Discussions

When to Turn on the Turn Signal During a Right-Angle Turn?

You should turn on the turn signal in advance for a right-angle turn. When entering the right-angle turn, there will be a voice announcement saying 'Please start the right-angle turn.' After the announcement ends, you must turn off the turn signal. Sometimes, the steering wheel may automatically return, so it's important to note that there is a time limit for keeping the turn signal on during a right-angle turn. Additional notes: Things to pay attention to during a right-angle turn: 1. After turning on the signal, it's best to use your finger to prevent the steering wheel from automatically returning, as an automatic return will result in a 10-point deduction. 2. If the turn signal turns off automatically when returning the steering wheel, you must immediately reactivate it; otherwise, it will be considered as not using the turn signal, resulting in a 10-point deduction. Turning it off too early is also not allowed, and failing to return the turn signal after completing the right-angle turn will also lead to point deductions.
18
3
Share

What are the materials of car covers?

Car cover materials: Car covers are divided into PVC material, single-coated material, double-coated flame-retardant material, nano flame-retardant material, leather oil material, and gold-pulled flame-retardant material. Here is the relevant information: 1. PVC material: Car covers made of PVC material have good dustproof and rainproof effects, but they are not sunproof or scratch-resistant, and can only be used on one side. PVC car covers only come in silver, are relatively heavy, usually weighing around 3-4 kilograms, and have a service life of about 2 years. 2. Single-coated material: Car covers made of single-coated material have good dustproof and sunproof effects, but they are not rainproof or scratch-resistant, and can only be used on one side. Single-coated car covers only come in silver, which is very effective in blocking ultraviolet rays. They are relatively light, usually weighing around 1 kilogram, and have a service life of about 2 years.
9
4
Share

How Often Should a Car Undergo Tire Rotation?

It is recommended to perform a tire rotation every approximately 20,000 kilometers. Tire rotation involves swapping the positions of the wheels, such as front-to-rear, side-to-side, cross rotation, or full rotation. The purpose is to account for the uneven weight distribution of the vehicle and the varying forces exerted on the front and rear tires during driving, which leads to different wear patterns on the four tires. This practice helps ensure even tire wear and extends the overall lifespan of the tires. The steps for tire rotation are as follows: 1. Use a jack to lift the vehicle about 10 cm off the ground to test stability, then safely raise the vehicle to the appropriate height; 2. Remove the tires from the vehicle; 3. Perform dynamic balancing on all four tires; 4. Carry out the tire rotation; 5. Use a torque wrench to tighten the wheel bolts in the correct sequence and to the specified torque; 6. Lower the vehicle and tidy up.
2
3
Share

What are the causes of transmission failure in the 2012 Focus?

The causes of transmission failure in the 2012 Focus may be due to oil seal leakage or transmission abnormalities. Here is a detailed introduction about the Focus: 1. Overview: The Changan Ford Focus was launched at the Guangzhou Auto Show on November 20, 2020. The Changan Ford Focus family introduced a total of eight models: among them, the 2021 Ford Focus includes seven models in both sedan and hatchback versions. 2. Others: The wheelbase is 2705mm. The fuel consumption ranges from 5.5 to 5.7L/100km. The standard seating capacity is five. The top speed is 215km/h. The acceleration time is 8.9s. The drive type is front-wheel drive. The body weight ranges from 1245 kg to 1411 kg. The suspension system is fully independent suspension.
15
0
Share

What Causes Insufficient Power in Motorcycles?

The reasons for insufficient power in motorcycles include non-compliant fuel, impurities in the fuel system, and fuel line blockages. Below are some explanations regarding the causes of insufficient power in motorcycles: 1. Non-compliant fuel: The use of low-grade or deteriorated gasoline can cause detonation, leading to a decrease in engine power. 2. Presence of water or air in the fuel system: This results in uneven fuel supply, causing the air-fuel mixture to fluctuate between lean and rich. When the combustible mixture is too lean, the flame propagation speed in the cylinder slows down, making the engine harder to start and resulting in insufficient power. 3. Fuel line blockage: Partial blockages in the fuel tank switch, fuel filter, or carburetor fuel passages can restrict fuel supply, only allowing the engine to idle or operate at low speeds. This leads to weak engine performance. 4. Excessive or insufficient lubrication oil: Too much lubrication oil can cause oil to participate in combustion, leading to incomplete combustion of the air-fuel mixture. This results in carbon buildup on the spark plug and muffler, increased fuel consumption, slower acceleration, and reduced power.
3
2
Share

How to Apply for a Temporary License Plate Without the Vehicle Certificate at a 4S Store?

Without the vehicle certificate, you cannot apply for a temporary license plate. You must obtain the certificate from the 4S store, as it is a crucial document for business authentication, payment of purchase tax, vehicle inspection, and license plate registration. Without it, you cannot register or insure the car. More details are as follows: 1. Importance of the Vehicle Certificate: When purchasing a car, you must request the certificate from the dealer. The vehicle certificate serves as proof that the vehicle meets factory standards and is a mandatory legal document for vehicle registration, insurance, and cancellation procedures. Without it, you cannot obtain a license plate or insurance. From production to delivery to the dealer, the certificate is an essential accompanying document. 2. Consequences of Not Having the Certificate: Without the vehicle certificate, you cannot register the vehicle, leaving you without protection for license plate registration, driving, insurance, and accident compensation, posing significant consumer risks. According to the theft and damage insurance exemption clauses, vehicles without a valid driving license or license plate issued by the traffic management department, or those that fail inspection, are not covered by insurance.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.