What are the functions of each icon in the Buick Envision?

2 Answers
VonCassandra
07/29/25 4:09am
The functions of each icon in the Buick Envision are as follows: Forward Collision Alert: When the vehicle gets too close to the car ahead, the system will emit an alarm to alert the driver. If the driver does not take action, the system will automatically brake the vehicle. Auto Start-Stop: During brief stops, the engine will shut off. Once the foot is removed from the brake pedal, the engine will restart. Recirculation/Outside Air: The difference between recirculation and outside air is that recirculation always provides air from inside the vehicle, while outside air allows outside air to enter and replace the existing air inside the vehicle. During traffic jams, in tunnels, or when the outside air quality does not meet standards, prioritize using recirculation. On highways, switch to outside air periodically to ensure fresh air and prevent health issues due to stale air. Climate Zone Sync: With the climate zone sync function, changing the temperature in the driver's zone will cause the same change in other zones. After turning off this sync, each zone can be set individually to meet the needs of passengers in different positions.
Was this review help?
17
4
Share
DeSkylar
08/12/25 7:54am
When I first drove the Buick Envision, those dashboard icons were a bit confusing. The yellow engine light indicates there might be a minor issue with the engine; the red oil pressure light means you must stop immediately for inspection; the tire pressure monitoring light warns of insufficient tire pressure, requiring prompt inflation; the ABS warning light signals a fault in the anti-lock braking system; the high coolant temperature light suggests possible engine overheating; and the airbag light, if illuminated, means the safety protection system might not be functioning. Every time a new light came on, I would pull over and check the owner's manual for details. The tire pressure monitoring is especially useful, providing real-time feedback on tire conditions to avoid the risk of leaks at high speeds; the eco-mode icon shows whether the fuel-saving mode is activated. Getting familiar with these icons made driving more reassuring, especially when I was a beginner—I even recorded a short video on my phone to review them repeatedly.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

What does average fuel consumption mean?

Average fuel consumption, commonly referred to as fuel consumption, is defined as the amount of fuel used by a vehicle per unit distance traveled. The commonly used unit is liters per 100 kilometers (L/100km), which is the fuel consumption per 100 kilometers. Below is the method to calculate the fuel consumption per 100 kilometers: 1. Find a gas station and fill up the tank (note: make sure you can see the fuel level from the fuel filler opening); 2. Reset the trip odometer to zero and start driving; 3. When the trip odometer reaches approximately 100 kilometers (it doesn’t have to be exactly 100 kilometers), find another gas station and fill up the tank to the same level as before, then record the amount of fuel added in liters; 4. Divide the recorded amount of fuel by the kilometers shown on the trip odometer and multiply by 100 to obtain a relatively accurate fuel consumption per 100 kilometers for your vehicle.
10
0
Share

Is It Okay for a Car to Be Exposed to Rain All the Time?

It is not advisable for a car to be exposed to rain all the time. Damage to the paint: If parked in a poor environment, acid rain is likely to occur, which can also damage the paint. Short circuits: Rain exposure may cause certain components of the car to corrode, leading to short circuits and potential hazards. Timely cleaning: After encountering heavy rain, the car should be cleaned promptly; otherwise, mud and sludge can accumulate in the gaps underneath the vehicle. Paint protection: The acidic components in rainwater can severely corrode the car's paint surface. Over time, this can cause damage to the car's paint. Therefore, during seasons with frequent rain, it is best to give your car a paint surface restoration.
10
4
Share

Does leaving the air conditioning on when starting the car have any impact?

Yes, it does have an impact. When the engine starts, the air conditioning compressor also begins to operate, which places a significant load on the battery and can affect its lifespan. Precautions: Avoid prolonged single-use of the air conditioning: If the interior temperature has reached a comfortable level, you can turn off the air conditioning or turn it on again after a while. Extended use of the air conditioning can cause excessive pressure on the condenser, leading to wear and tear on the cooling system. Therefore, it is advisable not to use the air conditioning for too long at a time. Ventilate by opening windows: When you first enter the car, you should open the windows for ventilation and turn on the external circulation to expel the hot air.
13
0
Share

How to Adjust the Height of Civic Car Seats?

Civic car seat height adjustment method: There is a handle on the left side of the passenger seat; lifting it increases the height, while pressing it down lowers the seat. Typically, car seat adjustment switches are located on the side of the seat. These switches come in manual and automatic variants, both serving the same function and operating on the same principle, differing only in the control method. In terms of powertrain, the Civic is equipped with two turbocharged engines: a 1.0T and a 1.5T. The 1.5T engine delivers a maximum power of 177 PS and a peak torque of 220 Nm, while the 1.0T engine offers a maximum power of 92 kW and a peak torque of 173 Nm. These engines are paired with either a 6-speed manual or a CVT transmission. For the chassis system, the Civic features a front MacPherson strut independent suspension and a rear double-wishbone independent suspension.
19
2
Share

What is the model of the original battery for the 2012 Focus?

2012 Focus original battery model is 12v60ah. The battery is a type of storage battery, also known as an accumulator, which works by converting chemical energy into electrical energy. The commonly referred to battery is a lead-acid battery, which mainly uses lead and its oxides as electrodes and sulfuric acid solution as the electrolyte. Taking the 2012 Focus Classic 1.8L Manual Basic Sedan as an example, it is equipped with a 1.8-liter inline four-cylinder engine, with a maximum power of 91kw and a maximum torque of 161nm, matched with a 5-speed manual transmission. In terms of body dimensions, the 2012 Focus Classic 1.8L Manual Basic Sedan has a length, width, and height of 4480mm, 1840mm, and 1500mm respectively, with a wheelbase of 2640mm.
12
2
Share

Should the Clutch Be Pulled During Emergency Braking on a Motorcycle?

If braking is required for stopping: pull the clutch, shift to neutral with your foot after braking, and release the clutch once the bike is fully stopped. If braking for deceleration: when encountering pedestrians, vehicles, or obstacles requiring brief deceleration, there is no need to pull the clutch. In practical operation: the clutch should only be pulled when the braking causes insufficient power and the engine is about to stall, at which point you should either stop or downshift. Clutch Introduction: The clutch is located within the flywheel housing between the engine and the transmission, with the clutch assembly secured to the rear plane of the flywheel by screws. The output shaft of the clutch serves as the input shaft of the transmission. Friction Clutch: The friction clutch is the most widely used and historically longest-standing type of clutch, primarily consisting of four parts: the driving part, the driven part, the pressing mechanism, and the operating mechanism.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.