What are the functions of BMW ConnectedDrive?

What is the difference between longitudinal and transverse engine placement?

The main differences between longitudinal and transverse engine placement are as follows: 1. The layout of the engine position is different. 2. Due to the different position layouts, the optimal power output direction of the engine varies. 3. Because of the above two characteristics, the best application and matching methods are different. 4. Transverse engines have a simpler structure, lower cost, and can expand the passenger compartment space, while longitudinal engine cars offer higher driving pleasure, better handling, and superior driving feel. 5. Cars with transverse engines have poorer handling and less driving pleasure. Longitudinal engines can encroach on passenger compartment space and are also more expensive.

4

3

Share

Will the electronic eye capture an unclosed trunk?

The electronic eye will not capture an unclosed trunk, but it is considered a violation of the law. According to the implementation regulations of China's Road Traffic Safety Law, it is clearly stated: 1. When driving a motor vehicle, doors and compartments must be properly closed. Generally, if traffic police see this situation on the road, they will stop the vehicle and issue a verbal warning. 2. However, if the trunk is loaded with many items, making it impossible to close the door, this situation will be penalized. Extended content: When driving a motor vehicle, the following behaviors are prohibited: 1. Driving with doors or compartments not properly closed. 2. Hanging or placing items within the front or rear windows of the motor vehicle that obstruct the driver's view. 3. Making or receiving handheld phone calls, watching TV, or engaging in other behaviors that hinder safe driving. 4. Turning off the engine or coasting in neutral on steep slopes. 5. Throwing items onto the road. 6. Riding a motorcycle with hands off the handlebars or hanging items on the handlebars. 7. Driving continuously for more than 4 hours without stopping to rest or resting for less than 20 minutes. 8. Honking the horn in areas or sections where honking is prohibited.

17

1

Share

How many kilometers should tires be replaced?

Under normal circumstances, tires need to be replaced after traveling 60,000 to 80,000 kilometers. The general lifespan of tires is 6 years. The mileage and road conditions vary, and driving habits differ, so even for the same car model, the degree of tire wear can vary. Additional information: 1. Long-term abnormal tire pressure and frequent driving on poor road conditions can cause tires to wear out too quickly. 2. On the sidewall of the tire, there is a wear indicator signal mark every 30 degrees. 3. According to China's national standards, the tread wear limit for radial tires used in passenger cars is 1.6mm, while for trucks and buses, it is 2.0mm.

9

0

Share

Should You Use Hazard Lights or Fog Lights in Rainy Weather?

There are several situations to consider when deciding whether to use hazard lights or front/rear fog lights in rainy weather: 1. Use parking lights for light rain. In such conditions, the road surface becomes slippery, reducing tire traction. Turning on parking lights helps alert other vehicles to maintain a safe distance. 2. Use headlights or front fog lights for heavy rain. When rainfall intensifies, water mist can form, creating poor visibility. Headlights or front fog lights improve light penetration without dazzling vehicles ahead, serving as an effective warning. 3. Use fog lights during torrential rain. Rear fog lights are extremely bright and can severely impair the vision of following vehicles under normal circumstances, compromising safety. If your vehicle supports simultaneous use of hazard lights and turn signals with turn signal priority, use that function. Otherwise, fog lights are preferable for safety in rainy conditions.

6

4

Share

What is the appropriate tire pressure value?

Tire pressure values represent the air pressure in the four tires, with the most commonly used unit being bar. Below are specific details about tire pressure monitoring: Direct Tire Pressure Monitoring: Direct tire pressure monitoring systems use pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is then transmitted wirelessly from inside the tire to a central receiver module, which displays the pressure data for each tire. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, leading to a faster rotation speed compared to the other wheels. By comparing the differences in rotation speeds between the tires, the system monitors the tire pressure.

19

3

Share

How to Activate the Lift Mode on a Panamera?

Here is the method to activate the lift mode on a Porsche Panamera: 1. First, start the vehicle using the ignition switch on the left side of the steering wheel; otherwise, adjustments cannot be made. 2. Then, press the illustrated button on the right side of the steering wheel to activate the lift mode. 3. After activating the lift mode, a warning light will appear on the display, and the vehicle height settings will be shown on the central control screen. You can adjust different chassis heights by clicking. This will enable the lift mode. Here is a brief introduction to the Porsche Panamera: 1. The Panamera is a large luxury car under the Porsche brand and is also Porsche's first four-door car. The Panamera is equipped with two engines: a 2.9-liter twin-turbocharged V6 engine and a 4.0-liter twin-turbocharged V8 engine. 2. The 2.9-liter twin-turbocharged V6 engine delivers 330 horsepower and a maximum torque of 450 Nm. This engine reaches its peak power at 5,400 to 6,400 rpm and its maximum torque at 1,340 to 4,900 rpm. It features direct fuel injection and an aluminum cylinder head and block. It is paired with an 8-speed dual-clutch transmission. 3. The 4.0-liter twin-turbocharged V8 engine produces 460 horsepower and a maximum torque of 620 Nm. This engine achieves peak power at 6,000 to 6,500 rpm and maximum torque at 1,800 to 4,500 rpm. It also utilizes direct fuel injection and an aluminum cylinder head and block. It is mated with an 8-speed dual-clutch transmission.

13

4

Share

What are the functions of BMW ConnectedDrive?

What is the difference between longitudinal and transverse engine placement?

Will the electronic eye capture an unclosed trunk?

How many kilometers should tires be replaced?

Should You Use Hazard Lights or Fog Lights in Rainy Weather?

What is the appropriate tire pressure value?

How to Activate the Lift Mode on a Panamera?

Where to Buy a Car Fire Extinguisher?

Why does BYD's DMi not have a transmission?

How to Add Windshield Washer Fluid?

Does turning on the car's heater consume more fuel?