What are the functions of a motorcycle electronic flasher?

What does Volkswagen tripkm mean?

Volkswagen tripkm represents the trip mileage in kilometers, where Trip stands for trip mileage and km refers to kilometers. The trip mileage (tripkm) is different from the total mileage (Odometer). The trip mileage helps users calculate the distance traveled for each trip and can be reset by long-pressing the right button. The total mileage calculates the vehicle's overall travel distance, which cannot be cleared by ordinary methods. tripkm: The speedometer indicates the car's speed in km/h (kilometers per hour). The car odometer actually consists of two meters: a speedometer and an odometer. The car odometer is usually located directly in front of the driver's position. Introduction to TRIPA and TRIPB: The odometer can be switched, and the "reset" button is pressed by holding the right small black stick for about a second. TRIPA and TRIPB can be used freely without any restrictions. A can be set to reset at each refueling to calculate fuel consumption; B can be set to reset at each maintenance, such as every 5,000 km. It can also be used to calculate the average fuel consumption over a certain period (several refuelings). The total odometer records and displays the vehicle's total mileage, which is the distance traveled since the vehicle was put into use. The total mileage of a car varies depending on the type of vehicle. For common passenger cars like family sedans, the normal lifespan is 15-20 years, with a typical mileage of 300,000-500,000 km under normal maintenance. For common commercial vehicles like container trucks, the normal lifespan is 10-15 years, with a typical mileage of 400,000-800,000 km.

2

5

Share

What is the maximum wading depth of the Wuling Zhiguang?

The maximum wading depth of the Wuling Zhiguang is 260mm. The wading depth of the Wuling Zhiguang is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact cars and small cars with low chassis, the position of the vehicle's air intake should be used as a reference when passing through waterlogged roads. If the air intake of the Wuling Zhiguang is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake (and thus the maximum wading depth) can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in water, which could cause severe damage due to water ingestion. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, or other vehicles' wheels and doors as reference points to judge the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half of the tire height or the engine's air intake, do not proceed and choose an alternative route instead.

3

4

Share

Where is the rear seat air conditioning switch in the car?

The switch for the rear seat air conditioning is located at the rear air vents of the car. There is a rotatable button on it which serves as the switch. Modern air conditioning systems consist of a refrigeration system, heating system, ventilation and air purification devices, and a control system. The following is an introduction to the car air conditioning system: 1. Introduction one: The car air conditioning system, referred to as car air conditioning, is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car cabin to the optimal state. It provides a comfortable environment for passengers, reduces travel fatigue, creates good working conditions for the driver, and plays an important role in ensuring safe driving. 2. Introduction two: It generally includes a refrigeration device, heating device, and ventilation device. This combined system makes full use of the limited space inside the car, has a simple structure, and is easy to operate. It is a popular modern car air conditioning system internationally.

19

5

Share

What are the reasons for the high fuel consumption of the Corolla 1.6?

The main reasons for the high fuel consumption of the Corolla 1.6 lie in daily maintenance, such as not replacing the air filter, fuel filter, engine oil and oil filter for a long time, abnormal tire pressure, or not replacing spark plugs according to the maintenance cycle. Maintaining good driving habits can also effectively reduce the problem of high fuel consumption. Notes: 1. Driving habits: Parking and idling consume a lot of fuel, so try to minimize idling time. Poor control of low-speed gear shifting will not save fuel. Driving in low gear for a long time will also increase fuel consumption, and frequent lane changes and curved driving will increase fuel consumption. Therefore, avoid driving at low speeds for too long, as engine failure can also cause abnormal fuel consumption. 2. Engine oil type: There are strict requirements for engine oil types, as the performance and technology of different engines determine which type of engine oil to use. Using the wrong type can lead to increased fuel consumption, abnormal wear, and other issues.

3

4

Share

What does PS on a car stand for?

PS on a car refers to the Power Steering Lock indicator. After starting the car, the steering wheel lock is engaged, and the light disappears. If the PS light is on, generally, the key cannot be turned when inserted; by gently moving the steering wheel left and right, the light will go off, allowing the key to turn and the car to start normally. The steering wheel lock is a very basic anti-theft feature of a car. Its principle involves using the rotation of the key to control a steel pin via a spring. When the key is removed, any movement of the steering wheel causes the steel pin to pop into a pre-drilled hole, locking the steering wheel in place to prevent it from turning. When the steering wheel is locked, it cannot be turned, the key cannot be rotated, and the car cannot be started, thereby achieving the anti-theft function. PS displayed on the car dashboard: When the car dashboard displays PS, it is an indicator light for the Power Steering system. The PS light turning on during ignition is part of the self-check process and should go off while driving. If the light remains on during driving, it indicates a fault in the Power Steering system, and the car should be taken to a 4S shop for repairs.

17

1

Share

What are the contents of the manual transmission Subject 2 driving test?

The C1 car test items include reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-turns). Some regions also include a sixth item: high-speed toll card collection. The full score for Subject 2 is 100 points, with assessment criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. A total test score of 80 points or above is considered a pass. If the applicant fails the Subject 2 test on the first attempt, they are allowed one retake. If the applicant does not take the retake or fails the retake, the test is terminated, and the applicant must reschedule the test after ten days. Within the validity period of the driving skill test permit, the number of scheduled attempts for the Subject 2 and Subject 3 road driving skill tests must not exceed five. If the applicant fails the fifth scheduled test, the results of any other previously passed subjects will be invalidated.

19

1

Share

What are the functions of a motorcycle electronic flasher?

What does Volkswagen tripkm mean?

What is the maximum wading depth of the Wuling Zhiguang?

Where is the rear seat air conditioning switch in the car?

What are the reasons for the high fuel consumption of the Corolla 1.6?

What does PS on a car stand for?

What are the contents of the manual transmission Subject 2 driving test?

Is it dangerous to drive with broken shock absorbers?

Is it okay to drive at 80 in a 70 speed limit zone with interval speed measurement?

Where is the first aid kit located in the car?

What are the regulations for the interval between driving license tests?