What are the functions of a fuel filter?

How to Park an Automatic Car Correctly?

Automatic car correct parking method is: 1. Step on the brake to slow down and stop; 2. After the car comes to a complete stop, shift to N gear and pull up the handbrake; 3. Release the foot brake, confirm the vehicle is stationary, then step on the foot brake again, shift to P gear, and turn off the engine. Automatic transmission means that the driver does not need to shift gears manually; the vehicle will automatically select the appropriate gear based on driving speed and traffic conditions. The gears of an automatic car are divided into: 1. P gear is the parking gear, also the starting gear; 2. R gear is the reverse gear; 3. N gear is the neutral gear; 4. D gear is the drive gear, also known as the forward gear; 5. L gear is the low gear; 6. S gear is the sport mode.

1

2

Share

What are the reasons for the anti-skid light of Bisu car to turn on?

The reasons for the anti-skid light of Bisu car to turn on are: 1. Accidentally pressing the ESP off button; 2. Loose or faulty sensor connectors; 3. Short circuit in the wiring or related fuse blown; 4. Software issues causing poor signal transmission and ABS pump failure. The vehicle anti-skid system uses an ABS or ASR electronic control unit to determine the wheel slip rate and vehicle driving speed by calculating and analyzing signals from the wheel speed sensors. Taking the Bisu T5 as an example: it uses a 1.5T L4 turbocharged engine with a maximum torque of 215 Nm, a maximum torque speed of 2000 to 4000 rpm, and is equipped with ABS anti-lock braking, child seat interface, engine electronic anti-theft, central locking, rearview camera, rear radar, hill start assist, and automatic parking.

5

Share

Is Automotive Air Conditioning Leak Sealant Effective?

The principle of automotive air conditioning leak sealant is to expand rubber seals to block gaps, which can be effective for a short period. Below are the specific reasons for refrigerant leaks in automotive air conditioning systems: 1. Pipeline failure: When laying the connecting pipes between the indoor and outdoor units of the air conditioner, if the bending angle of the pipes is too small, it can cause the pipes to crack and leak refrigerant or result in no refrigerant. During the pipe-laying process, appropriately increase the bending radius of the pipes to prevent sharp bends; promptly repair or replace any leaking pipes. 2. Leak points in the refrigeration system: When replacing components of the refrigeration system, improper secondary installation can create leak points in the pipes and refrigeration system. Apply a mild soapy water solution to the entire refrigeration system's pipelines and welded areas for leak detection. The testing conditions require the refrigeration system to be filled with nitrogen or refrigerant. Pay close attention to areas with oil stains on the pipelines, identify leak points one by one, and perform component repairs or replacements based on the actual situation.

14

5

Share

How long does it take to pick up a car after ordering?

The time from purchasing a car to picking it up is not a fixed value due to differences in the car model and configuration purchased. For some highly popular models, it may take up to a month to pick up the car. However, for less popular models, the pickup time may be shorter, possibly within a few days. Here are some considerations for first-time car buyers: 1. Determine your purchasing power: To ensure that buying a car does not affect the overall quality of life for your family, it is generally recommended to allocate 20% of your family's average income over the past three years, but not exceeding 10% of your family's fixed asset value. 2. Determine the brand to purchase: Based on your purchasing power, you can generally determine how much you can spend on a car, which helps narrow down the brands you can consider (this process excludes personal preferences for specific brands). Among these brands, the most important factor for a family car is safety, followed by affordability, as the safety of the car carries the lives of the entire family, making it the top priority.

1

4

Share

What car has the WEY logo?

A car with the WEY logo is a Great Wall Motors vehicle. Additional information is as follows: 1. Introduction to WEY: WEY refers to a Chinese luxury SUV brand. It is a Chinese luxury SUV brand developed by Chinese SUV manufacturer Great Wall Motors, with an international R&D team of over 1,600 people working on it for four years. 2. Brand Technology: Intelligent safety technology, as safety is the premise of all luxury. From its inception, intelligent safety has been the core value pursuit of the WEY brand. The WEY safety system achieves intelligent safety innovation in four dimensions: life, property, information, and the environment, defining "new safety" in the future intelligent ecosystem. New energy technology, adhering to the vision of "creating a cleaner Earth for humanity," the WEY brand focuses on new energy products and has laid out comprehensive technical routes in the industry, including pure electric, hybrid, and hydrogen fuel cell technologies. Accelerating the implementation of electrification strategies and comprehensive decarbonization plans to establish a leading advantage in the field of cleanliness ahead of others, and to seize the global high ground in new energy technology.

3

Share

Is the Timing Mark on the Peugeot 408 Crankshaft Pulley Useful?

The timing mark on the Peugeot 408 crankshaft pulley is extremely useful. This is because the alignment of the timing gear and camshaft timing gear is a critical step during repair and assembly, directly affecting the vehicle's power performance. Therefore, it must be taken seriously. Here are the relevant details: 1. Assembly Process: During assembly, if both timing gears have timing marks, since the positional relationship between the gears and the crankshaft is determined by the keyway, simply align the timing marks of the two gears and install them. 2. Assembly Without Marks: (1) If the timing marks on the two timing gears are unclear or missing, but the valve timing angles of the intake and exhaust valves are known, the following method can be used for assembly. (2) Align the timing marks. In this case, observe the movement of the intake and exhaust valve rocker arms of the first cylinder by turning the flywheel clockwise and counterclockwise to determine whether the first cylinder piston is at top dead center of the compression stroke or the exhaust stroke. When there is no movement in the intake and exhaust valve rocker arms, it indicates the piston is at top dead center of the compression stroke. (3) The crankshaft timing point is marked by a circular indicator on the crankshaft pulley, which aligns with a special link in the timing chain. This is the crankshaft timing point. Rotate the exhaust camshaft to align its mark with the chain's mark, then tighten the camshaft bolt on one side to tension the chain. Rotate the crankshaft timing sprocket to align the crankshaft mark with the chain's mark, completing the timing alignment.

9

5

Share

What are the functions of a fuel filter?

How to Park an Automatic Car Correctly?

What are the reasons for the anti-skid light of Bisu car to turn on?

Is Automotive Air Conditioning Leak Sealant Effective?

How long does it take to pick up a car after ordering?

What car has the WEY logo?

Is the Timing Mark on the Peugeot 408 Crankshaft Pulley Useful?

What does the D+- in automatic transmission mean?

What are the regulations for using temporary vehicle license plates?

Is there a trunk switch inside the Tayron's cabin?

How many days after window tinting can you not roll down the windows?