What are the full English names of the automatic transmission letters?

1 Answers
BradyMarie
07/30/25 4:40am
Full English names of the automatic transmission letters: P stands for Parking, the parking gear, used when the car is parked and not in use, at this time the wheels are mechanically locked to prevent rolling; R stands for Reverse, the reverse gear, used when reversing; N stands for Neutral, the neutral gear, used for temporary parking; D stands for Drive, the forward gear, also known as the driving gear. Additionally, L stands for Low, the low gear, used when going downhill or on long downhill slopes, placing the gear here limits the car's gear to automatically stay in the lowest gear; S stands for Sport, indicating sports mode, in this gear the transmission can shift freely, but the shifting timing is delayed, keeping the engine at high RPM for a longer time to increase the vehicle's power.
Was this review help?
11
5
Share
More Forum Discussions

The Difference Between Two-Box and Three-Box Designs?

The differences between two-box and three-box designs are as follows: 1. Two-Box Cars: Only have an engine compartment and a passenger compartment, without a separate luggage compartment. 2. Three-Box Cars: Have an engine compartment, a passenger compartment, and an independent luggage compartment. 3. In terms of usage: Most two-box cars on the market are shorter than three-box cars, making them more flexible, occupying less space, and easier to reverse. Although three-box cars offer larger cargo space, they consume more fuel accordingly and are less flexible in congested urban traffic conditions compared to two-box cars.
13
1
Share

Does replacing a window glass classify as accident damage?

If the glass was replaced due to impact damage, then the vehicle is considered an accident-damaged car; however, if the glass was damaged and replaced due to an unforeseen and unavoidable event, it does not qualify as an accident-damaged car. Methods to inspect whether a car is accident-damaged are as follows: 1. Check if the entire chassis frame shows signs of impact (even if repaired): Inspect the entire undercarriage—the level of dirt accumulation should be roughly uniform, with no sections appearing unusually clean. The frame should also be straight. 2. Check if the radiator support has collision damage (even if repaired or replaced). 3. Inspect whether the rear quarter panels have been cut and replaced: The connection points between the quarter panels, the cabin, and the body should be smooth, with weld spots slightly rounded and slightly recessed. If the weld spots appear raised, it indicates signs of re-welding.
12
0
Share

How Long Does Car Waxing Last?

Car waxing typically lasts for about 3 months, and car owners need to wax their vehicles every 3 months. More relevant information is as follows: 1. As a traditional item in car detailing, the primary function of car waxing is waterproofing and protection against acid rain. Due to the protection provided by car wax, the amount of water droplets adhering to the car body is significantly reduced, with an effectiveness rate ranging from fifty to ninety percent. 2. Car waxing can protect against high temperatures and UV rays. Cars that are driven or parked outdoors year-round are prone to paint aging and fading due to sunlight exposure. The film formed by waxing can reflect some of the light, effectively preventing paint aging. Additionally, car wax can prevent static electricity and, consequently, dust. When a car is in motion, friction with the air generates static electricity, and car wax can effectively reduce the friction between the car body and air or dust. With less static electricity, there is naturally less dust adhesion. Moreover, car wax also has a polishing effect, making the car's paint appear newer and more attractive.
15
2
Share

Is it better to use the car air conditioner in recirculation mode or fresh air mode?

There is no absolute better or worse between the recirculation mode and fresh air mode of car air conditioning. It should be flexibly used according to actual situations. Relevant usage guidelines are as follows: 1. Road conditions: Use fresh air mode on highways. Firstly, due to wind resistance and speed, opening windows is not suitable on highways. If recirculation mode is used for a long time, it may cause brain hypoxia, affecting reaction and judgment, which is very dangerous. Secondly, the air quality on highways is generally good with low exhaust concentration, so fresh air mode can be chosen. In crowded urban areas or during rush hours when vehicle exhaust concentration is high, decisively switch to recirculation mode. 2. Vehicle condition: New cars usually contain high concentrations of toxic gases like formaldehyde. Therefore, for the first three to six months after purchasing a new car, it is recommended to use fresh air mode along with opening windows to enhance air circulation and dilute the concentration of toxic gases inside the car. 3. Air quality: In some regions where PM2.5 pollution is severe on certain days, with PM2.5 levels above 50 and air quality not being good, it is advisable to use recirculation mode to avoid excessive inhalation of PM2.5 particles by the lungs. 4. Season: When using air conditioning in summer, recirculation mode is recommended because fresh air mode allows hot outdoor air to enter the car, causing the air conditioner to work continuously in cooling mode with poor efficiency. In winter, if the heater is on, remember to switch to fresh air mode to prevent dizziness and chest tightness. Additional information: 1. Recirculation mode: This mode closes the airflow passage between the inside and outside of the car. Without the fan, there is no airflow circulation. When the fan is on, the airflow drawn in comes only from inside the car, creating internal airflow circulation. Recirculation mode effectively prevents external dust and harmful gases from entering the car, such as when driving through smoke, dust, odorous areas, or in heavy traffic, blocking harmful exhaust from vehicles ahead. Another function is to maintain temperature. 2. Fresh air mode: This mode uses the fan to draw outside air into the car, meaning the airflow channel between the outside and inside is open. The air blown by the fan comes from outside, and even without the fan, airflow is still drawn into the car while driving, replenishing fresh air inside. Sometimes, even when the fan is off, air still enters because the fresh air mode is set. In urban traffic jams, the car may fill with exhaust fumes due to the fresh air mode drawing in vehicle exhaust from the road.
3
3
Share

How to Know When to Replace Brake Fluid?

Brake fluid does not have a specific replacement interval. The replacement criterion is based on testing its water content. When the water content in the brake fluid exceeds 3%, it must be replaced. Here are some details about brake fluid: 1. Brake fluid is an oil: But it is not a lubricating oil. It is not used to lubricate the brakes but to transmit hydraulic pressure. Based on the usage characteristics of brake fluid, the main criterion for determining whether it needs replacement is its water content. Since brake fluid is hygroscopic, some water molecules from the air can gradually permeate into the brake fluid through various pores, causing the water content to increase. When the water content reaches a certain level and the brakes are frequently applied, the compression of the brake fluid can cause the water inside to expand due to excessive temperature, potentially leading to reduced braking performance, such as ineffective or continuous braking. 2. The most direct way to determine the water content in brake fluid: Use a test pen for measurement.
15
4
Share

Is 4 Liters of Engine Oil Enough for One Maintenance?

Generally, 4 liters of engine oil is sufficient for one maintenance. The exact amount of oil needed depends on the vehicle model, and some models may require different amounts of oil due to varying engine displacements. Here is relevant information: 1. Too much oil: This can easily increase engine load and affect performance; over time, the engine's exhaust ventilation system may also be damaged, carbon deposits may increase, and excessive oil may cause some oil to enter the combustion chamber, leading to oil burning. 2. Too little oil: This will result in insufficient lubrication of engine components, accelerating their wear. Oil also plays a crucial role in cooling and heat dissipation. If the oil level is too low, the engine's cooling and heat dissipation capacity will weaken, causing internal overheating and further leading to phenomena such as bearing seizure and cylinder scoring.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.