What are the fuel-saving methods for the 7th generation Accord?

2 Answers
TaliaDella
07/29/25 5:04am
The vehicle's load weight will increase fuel consumption, and it is also advisable to avoid sudden braking, sudden acceleration, and frequent braking. Another crucial point is the road conditions during travel. If the traffic conditions are too complex, try to choose well-maintained, open, and flat roads for driving, which should help alleviate fuel consumption. More relevant information is as follows: 1. Factors involved: Fuel consumption issues involve many factors, and increased fuel consumption is related to weather conditions, whether cold or hot. 2. Winter fuel consumption: Due to low environmental temperatures, the engine takes longer to reach normal operating temperature, and the air-fuel mixture is richer during low temperatures, resulting in higher fuel consumption in winter compared to other seasons.
Was this review help?
7
5
Share
LaylaRose
08/12/25 8:42am
I've been driving a 7th-generation Accord and found that fuel efficiency largely depends on driving habits. Gently press the accelerator when starting, avoid sudden acceleration, and maintaining a steady speed of 60-80 km/h is most economical. On highways, avoid frequent lane changes and hard braking - anticipating and decelerating early can save significant fuel. Don't carry unnecessary weight in the car; clean out the trunk to reduce load. In summer, minimize window opening to reduce air resistance, and set the AC at a moderate temperature rather than too low. Regular maintenance is also crucial - for instance, a cleaner engine naturally consumes less fuel. Lower fuel consumption means happier wallets and more relaxed driving.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

What is the speed limit on the Jingxin Expressway?

For large and medium-sized trucks, the maximum speed should not exceed 80km/h; for other vehicles, the maximum speed should not exceed 100km/h. There are three key points to note when driving on the expressway: 1. Entering the expressway: Drivers should accelerate to at least 60km/h as soon as possible. Vehicles entering from the ramp must increase their speed in the acceleration lane and should not hinder vehicles already on the main lane when merging. They should initially drive in the outer lane. 2. While driving: Vehicles should stay in their designated lanes. Small passenger vehicles should drive in the middle lane, while large buses and freight trucks should drive in the right lane. 3. Lane changes: Drivers must not change lanes arbitrarily. When changing lanes or overtaking, they must signal in advance with their turn indicators. At night, they should also switch between high and low beams to confirm safety before changing lanes. Overtaking is only permitted using adjacent lanes.
3
4
Share

What is the normal tire pressure for SUV cars?

SUV car tire pressure is normally between 2.2 to 2.5 bar. You can find the manufacturer's recommended tire pressure value on the label near the B-pillar or C-pillar of the car door. Tire pressure cannot remain accurate all the time, so it is essential to check it regularly. The tire pressure can be slightly higher but must never be too low. If you feel that the tire pressure affects driving comfort, you can release a little air. Strictly speaking, tire pressure refers to the air pressure inside the tire. Nowadays, many tires are not filled with air. For these tires, the tire pressure requirements are more stringent. Tires filled with air are affected by seasonal changes. Additionally, tire pressure is closely related to the car's performance, such as comfort and load capacity, and it also affects tire lifespan.
14
3
Share

What does the 3597+2 fault code mean?

3597+2 fault code indicates an engine malfunction. The causes of engine failure are as follows: Fuel supply system failure: The fuel supply system mainly includes the fuel tank, fuel pump, pipelines, fuel filter, carbon canister, carbon canister solenoid valve, fuel pressure regulator, fuel injectors, etc. Poor fuel quality: Fuel quality is the primary factor causing the engine warning light to illuminate. The anti-knock property of gasoline is represented by the octane number. The higher the octane number, the better the anti-knock performance. For example, 97-octane gasoline has an octane number of no less than 97. Leaded gasoline can cause lead poisoning in oxygen sensors. Therefore, poor fuel quality is the main reason for insufficient engine combustion, leading to the illumination of the engine warning light. Abnormal fuel pressure: If the fuel pump's supply pressure does not reach a certain level, it will result in poor atomization of the fuel injectors, thereby affecting the normal operation of the engine.
19
2
Share

Do Electric Sedans Require Annual Inspections?

Electric sedans do require annual inspections. For private vehicles, whether they are purely fuel-powered or electric models, they must undergo on-site testing after six years of use. Vehicles aged between 6 and 15 years require annual inspections, while those over 15 years old must be inspected every six months. The main difference lies in the inspection items between fuel-powered and pure electric models. Pure electric models are exempt from tailpipe emission testing. However, other functional tests such as lighting, exterior appearance, and chassis inspections still apply to electric vehicles. After passing the annual inspection, pure electric models must display the inspection sticker on their windshields, just like fuel-powered vehicles, to prove compliance with that year's inspection requirements.
14
4
Share

Is It Necessary to Install Door Shock Absorber Pads in a Car?

It is necessary to install door shock absorber pads in a car. The functions and materials of shock absorber pads are introduced as follows: Functions of Shock Absorber Pads: They prevent direct contact between the shock absorber and the car body. When the car turns and the center of gravity shifts to one side, causing the body to tilt and compress the springs, the pads provide support, thereby reducing the car's body roll. Materials Used for Shock Absorber Pads: The pads are made of paper, rubber sheets, or copper sheets, serving as sealing materials placed between two flat surfaces to enhance sealing. They act as sealing elements set between static sealing surfaces to prevent fluid leakage. They are installed on the car body via adhesive, and the adhesive materials are mostly mild, so they naturally do not cause damage to the car body's surface.
10
0
Share

Is Minor Underbody Scraping Serious?

Minor underbody scraping is not serious. What are the impacts of underbody scraping: Generally, minor scraping may cause scratches on the underbody, which is not a big issue, but the scratched areas are prone to rust. Severe underbody scraping requires a comprehensive inspection of the chassis, especially the front part of the vehicle, which includes components like the engine, transmission, oil pan, etc. Severe scraping can lead to oil pan leaks, transmission damage, or deformation of the drivetrain components, causing significant harm to the vehicle. Solutions: Install an engine skid plate. An engine skid plate can protect the engine from impacts by road debris and scrapes by foreign objects. However, this practical feature is not available on all vehicle models. For models without this protective plate, it is recommended that owners install one, choosing from materials like metal, resin, or plastic.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.