What are the free maintenance items included in Lexus after-sales service?

Which is more fuel-efficient, Alto or BYD F0?

Compared to the Alto, the BYD F0 is slightly more fuel-efficient. The F0 has a fuel consumption of only 4.2 liters per 100 kilometers, while the manual transmission Alto consumes 5.0 liters per 100 kilometers, and the automatic transmission Alto consumes 5.7 liters per 100 kilometers. Therefore, the F0 is more fuel-efficient. Here is more information about the BYD F0: 1. The BYD F0 is a premium compact car launched by BYD. 2. The BYD F0 features a stylish design and is equipped with the BYD371QA high-performance eco-friendly engine independently developed by BYD. With a 1.0L displacement, it meets the National IV emission standards and has a fuel consumption of only 4.2L per 100 kilometers. In terms of safety features, the F0 comes with dual airbags, ABS, power steering, and more. 3. The BYD F0 incorporates the most popular European design elements, combining international classic trends with a compact, rounded, and sleek appearance.

15

0

Share

What Causes an Automatic Transmission Car to Stall When Shifting Gears?

Automatic transmission cars may stall when shifting gears due to battery issues, high-voltage circuit faults, or fuel line blockages in the engine. Battery Issues: When the battery reaches the end of its lifespan, its capacity and output voltage decrease. This can directly lead to abnormal starter operation, low voltage, and issues such as the engine spark plugs failing to produce sparks. In severe cases, the engine may stall and become difficult to start. Solution: Replace the battery. High-Voltage Circuit Faults: Inspect the high-voltage circuits for signs of aging, detachment, short circuits, or open circuits. Engine Fuel Line Blockages: Abnormal fuel supply can cause interruptions in the engine's stroke, or severe carbon buildup or erosion in the spark plugs may lead to unstable ignition, making the engine difficult to start. The engine may also stall abnormally when the throttle changes. Solution: Perform regular cleaning and maintenance of the engine's fuel lines (including fuel supply and lubrication lines), promptly inspect and replace spark plugs, and if necessary, conduct a carbon removal treatment inside the cylinders.

1

Share

Why does Audi always display fog light fault codes?

Audi always displaying fog light fault codes requires removing the fog light grille, taking down the fog light, and checking whether the plug and bulb are damaged. Introduction to fog lights: Fog lights (foglamp), also commonly referred to as spotlights. As the name suggests, their primary purpose is to ensure the driver's visibility in adverse weather conditions and to make sure others can see them. However, many manufacturers now install fog lights merely to enhance the aesthetic appeal of the front bumper, often using low-quality fog lights. Similar to headlights, besides replacing them with brighter fog lights, opting for a pair of HID xenon fog lights is also an excellent choice. Attention to fog light installation position: It is important to note that fog lights should only be installed below the bumper, at the lowest point of the vehicle body closest to the ground, to ensure their effectiveness. If installed too high, the light cannot penetrate rain and fog to illuminate the road conditions (fog is generally thinner below 1 meter), which can easily lead to hazards.

20

2

Share

How much engine oil should be added to the Nissan Sylphy Classic?

For the Nissan Sylphy Classic with a 1.6L engine, approximately 3L of engine oil is generally required, while the 1.8L engine model typically needs around 4L. The exact amount of oil to be added should be between the upper and lower marks on the dipstick, with the dipstick serving as the standard for the optimal oil level. Below are the steps for changing the engine oil: 1. Remove the oil filler cap. 2. Place an oil drain pan under the drain plug. 3. Use a wrench to loosen the drain plug and drain the oil. 4. After the oil has completely drained, reinstall the drain plug and tighten it to the specified torque (55±5N.m). 5. Slowly add engine oil through the filler hole until it reaches the upper mark on the dipstick. 6. Use an absorbent cloth to wipe away any spilled oil and replace the oil filler cap. 7. Start the engine and let it idle for 1 minute, then turn it off and wait for 5 minutes before checking the dipstick again.

17

4

Share

When is the Deadline for Subject 4 Exam Before the Chinese New Year?

Subject 4 exam registration at driving schools usually closes one week to half a month before the Chinese New Year. Introduction to Subject 4 Exam: Subject 4, also known as Subject 3 Safety and Civilized Driving Knowledge, or Subject 4 Theory Test, is part of the motor vehicle driver's license assessment. Subject 4 Exam Question Count: The Subject 4 exam consists of 50 questions, with a total score of 100 points (2 points per question). The exam content mainly includes safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge. Booking and Retake Policy for Subject 4 Exam: Within the validity period of the learning-to-drive certificate, candidates can book the Subject 4 exam an unlimited number of times. Each exam session offers one retake opportunity. If a candidate fails the first attempt, they can ask the examiner to rescan their ID card for a retake. However, if the retake is also failed, the exam is considered unsuccessful.

13

2

Share

Does the Volkswagen Tayron Commemorative Edition have a particulate filter?

The Volkswagen Tayron Commemorative Edition is equipped with a particulate filter. The Diesel Particulate Filter (DPF) is a ceramic filter installed in the exhaust system of diesel engines, designed to capture particulate emissions before they enter the atmosphere. Its primary function is to filter out tiny particulate matter from the exhaust gases. Once a certain accumulation level is reached, it automatically burns off the captured particles, enabling continuous operation. The diesel particulate filter effectively reduces particulate emissions by first capturing the particulate matter from the exhaust and then oxidizing the collected particles to regenerate the filter. The regeneration process refers to the periodic removal of accumulated particulate matter during long-term DPF operation. As particles gradually build up inside the filter, they increase engine backpressure, leading to reduced engine performance. Therefore, regular cleaning is necessary to restore the DPF's filtration efficiency. A clogged particulate filter can reduce vehicle power. Some vehicle models are programmed to automatically decrease the diesel engine's power output if a DPF blockage is detected. Additionally, significant exhaust backpressure can also weaken the vehicle's dynamic performance.

9

3

Share

What are the free maintenance items included in Lexus after-sales service?

Which is more fuel-efficient, Alto or BYD F0?

What Causes an Automatic Transmission Car to Stall When Shifting Gears?

Why does Audi always display fog light fault codes?

How much engine oil should be added to the Nissan Sylphy Classic?

When is the Deadline for Subject 4 Exam Before the Chinese New Year?

Does the Volkswagen Tayron Commemorative Edition have a particulate filter?

Where is the rear sunroof drain outlet of the Envision located?

What is the maintenance schedule for the Haval H9?

How to Remove the Headrest of a Skoda Octavia?

How to Coordinate the Accelerator and Clutch?