What are the Five Fixations of a Rescue Vehicle?

1 Answers
JacksonDella
07/29/25 8:41pm
Here are the detailed explanations of the five fixations for a rescue vehicle: 1. Fixed-time verification: Check the quantity and quality, then sign and record. 2. Regular disinfection: Keep all items on the rescue vehicle clean, dry, and in good condition for immediate use. 3. Fixed placement: Ensure all rescue items and medications are stored in designated locations for immediate access and supply. 4. Fixed personnel in charge: The rescue vehicle must be managed by designated personnel in specific areas, with clear responsibilities assigned. Weekly inventory checks and dedicated records are required. 5. Fixed-quantity supply: Items on the rescue vehicle, especially medications, must not be supplied without limits. There must be controlled quantities and quality, ensuring fixed and customized supply, with effective records maintained before and after supply.
Was this review help?
8
2
Share
More Forum Discussions

What to Do When the Coolant Warning Light Comes On?

When the coolant warning light comes on, you should promptly add coolant. The illumination of the coolant warning light indicates that the coolant level is too low. Continuing to drive with insufficient coolant can affect the engine's heat dissipation and potentially damage the engine. Coolant needs to be replaced regularly. If not changed for a long time, the coolant's freezing point may rise and boiling point may drop, which can impair the engine's normal operation. When replacing coolant, always go to a professional shop and use specialized equipment. Inside the engine, coolant follows two circulation paths: a major cycle and a minor cycle. When the engine is first started, the coolant undergoes a minor cycle to allow the engine to warm up quickly. During the minor cycle, the coolant does not pass through the radiator for cooling. Once the engine reaches its normal operating temperature, the coolant switches to a major cycle, where it flows through the radiator to dissipate heat.
10
4
Share

What behaviors will disqualify you from the driving test?

Behaviors that will disqualify you from the driving test: 1. Exceeding the validity period: The contract signed when enrolling in a driving school has a clear study period. If the course is not completed within the specified time, the driving school can disqualify you from the driving test; 2. Cheating on the test: Cheating or engaging in other improper behavior during the driver's license test will invalidate the results of any passed subjects and disqualify you from that test. The applicant will not be allowed to apply for a motor vehicle driving permit for three years; 3. Drug use: Drugs can cause mental excitement, which is very detrimental to driving. If drug use is discovered during the driving test period, you will be directly disqualified from the driving test; 4. Failing the subject two or subject three test more than five times; 5. Driving under the influence of alcohol during the driving test period; 6. Driving without a license.
6
5
Share

What Items Are Included in a Full Vehicle Maintenance?

Full vehicle maintenance includes the following items: 1. Inspect and replenish fuel and lubricants, clean the interior and exterior of the vehicle, and the engine chassis; 2. Check the horn, lighting, wipers, steel plates, and springs for any fractures, and ensure the springs, shackles, and U-bolts are not loose. Inspect the half-shaft, tires, nuts, and rims for cracks or damage, and check if the tires have any cuts or air loss; 3. Clean the air filter, replace the filter element, drain oil-water accumulations, and check the oil levels in the engine, transmission, rear axle, and steering gear; 4. Inspect the tightness of connections in the steering gear, tie rods, and steering arms. Check and adjust the air compressor, the tension and fixation of the engine fan belt, and inspect the brake valve and brake pipes for air leaks. Check the brake fluid level in the hydraulic brake master cylinder; 5. Check and adjust the clutch pedal, inspect the battery casing, clear the vent holes on the small cover, and replenish the electrolyte; 6. For new vehicles, replace the engine oil, oil filter, and transmission oil after driving 1,000 kilometers.
7
3
Share

Should the Original Paint Be Scraped Off Before Repainting?

Repainting requires the removal of the original paint because if the old paint is not treated, the new paint will not adhere properly and may peel off when blended with the old layer. If the original paint is left untreated, even if the new paint looks perfect right after application, it can easily come off when washed with a high-pressure water jet during car cleaning. Leaving the original paint untouched will also result in the repainted area being higher than the surrounding surface, which is aesthetically unpleasing. Typically, the entire clear coat layer is sanded off before applying the base coat, followed by a new clear coat. The electrophoretic coating serves as the primary anti-corrosion layer of the car; if damaged, the steel panels may gradually corrode. For minor scratches that don't reach the primer, polishing with a rubbing compound may suffice instead of repainting. However, if the primer is exposed, the original paint must be polished off before applying a new coat.
6
1
Share

Where is the heater flap located in the new Sagitar?

The heater flap in the new Sagitar is located on the servo motor, which is inside the air conditioning system. To see the heater flap and servo motor, you need to remove the entire center console. The new Sagitar is equipped with two types of engines: a 1.2-liter turbocharged engine and a 1.4-liter turbocharged engine. The body dimensions of the new Sagitar are 4753 mm in length, 1800 mm in width, and 1462 mm in height, with a wheelbase of 2731 mm. The new Sagitar features front-wheel drive, with a MacPherson independent front suspension and a multi-link independent rear suspension, and the body structure is of a unibody design.
6
4
Share

How to Remove the Rear Seat Cushion of the Fit?

Method for removing the rear seat cushion of the Fit: There are two screws in the middle of the rear seat. Remove these two screws, then detach the two clips to take off the rear seat. The Fit is equipped with a 1.5-liter naturally aspirated engine, with the model code L15B3, delivering a maximum power of 96 kW and a maximum torque of 155 Nm. The Fit is a compact car under Honda, with body dimensions of 4109 mm in length, 1694 mm in width, and 1537 mm in height, and a wheelbase of 2530 mm. The front suspension of the Fit uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.