What are the five driving modes of the BYD Han DM?

What are the causes of unstable idle speed?

Reasons for unstable idle speed in cars: 1. Intake manifold leakage: When unauthorized air, gasoline vapor, or exhaust gases enter the intake manifold, causing the air-fuel mixture to become too rich or too lean, leading to unstable idle speed. 2. Excessive carbon buildup in the throttle body: Too much carbon deposit in the throttle body and surrounding intake passages changes the cross-sectional area of the air passage, making it impossible for the control unit to precisely regulate idle air intake. This also results in an overly rich or lean mixture, causing unstable idle speed. 3. Faulty intake system components: There are many actuators in the engine's intake system, such as throttle motor, idle speed control stepper motor, duty cycle solenoid valve, air flow meter, intake pressure sensor, etc. Malfunctions or damage to these components can cause unstable idle speed. 4. Fuel system faults: Issues like clogged fuel injectors, blocked fuel filter, obstructed fuel pump screen, faulty fuel pressure regulator, or blocked return line can all lead to incorrect fuel injection, causing the mixture to be too rich or too lean, resulting in unstable idle speed. 5. Ignition system faults: Problems such as faulty ignition module, incorrect spark plug gap, eroded or damaged spark plug electrodes, or excessive resistance in high-voltage wires can reduce ignition spark energy or cause misfires, leading to erratic idle speed fluctuations.

13

1

Share

Which country produces Mitsubishi engines?

Mitsubishi engines are produced by China Shenyang Aerospace Mitsubishi Engine Co., Ltd., established in 1997. 1. Mitsubishi is a Japanese corporate group. 2. The predecessor of the Mitsubishi Group was the Tsukumo Shokai established by Yataro Iwasaki in Tosa Domain. 3. In 1870, Yataro Iwasaki took over the Nagasaki Shipyard operated by the Japanese government and renamed it Mitsubishi Shokai. In 1996, Mitsubishi Motors began cooperating with several Chinese companies. Initially, Mitsubishi partnered with Changfeng Motors to produce the Mitsubishi Pajero series. The Chinese military's Leopard off-road vehicles were improved based on the Mitsubishi Pajero during that time. With the rapid development of China's automotive market, Changfeng hoped for deeper cooperation with Mitsubishi, but to no avail. In 2006, Mitsubishi acquired a portion of Southeast Motors Group's equity, establishing Soueast Mitsubishi. However, Soueast Mitsubishi also struggled, with consistently low sales until GAC stepped in to merge with Changfeng in 2012, saving Mitsubishi. Currently, Mitsubishi operates in the Chinese market through Soueast Mitsubishi and GAC Mitsubishi.

10

5

Share

Does the 2019 Bora have front and rear anti-collision beams?

The 2019 Volkswagen Bora is equipped with both front and rear anti-collision beams. The front and rear anti-collision beams have the following advantages: Front anti-collision beam: The front anti-collision beam can protect many important components in the front of the car, thereby reducing the owner's repair costs. Rear anti-collision beam: The rear anti-collision beam can also protect the car body, preventing damage to the body structure. The Bora is a very classic compact sedan under the Volkswagen brand, and this model enjoys good sales and reputation in China. The 2019 Volkswagen Bora is equipped with two engines: one is a 1.5-liter naturally aspirated engine, and the other is a 1.4-liter turbocharged engine. The 1.5-liter naturally aspirated engine, compliant with the China VI emission standard, has a maximum power of 83 kW, a maximum torque of 145 Nm, a maximum power speed of 6,000 rpm, and a maximum torque speed of 3,900 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a 6-speed automatic transmission.

8

5

Share

What is the size of the Magotan's wheel rims?

The wheel rim size of the Magotan is 16 inches. The wheel rim is the central part of the wheel where the axle is installed, commonly referred to as the 'rim' or 'steel rim'. Wheel rims are prone to accumulating dirt, and if not cleaned for a long time, they may corrode and deform, leading to potential safety hazards. Wheel rims are divided into steel rims and alloy rims, with the differences as follows: 1. The main advantage of steel rims is their simple manufacturing process (usually using casting techniques, whereas alloy rims are typically produced using low-pressure casting), relatively lower cost, and strong resistance to metal fatigue. 2. Steel rims are heavier (the same rim made of steel is much heavier than one made of aluminum alloy), have greater inertial resistance, poorer heat dissipation, and are prone to rust. 3. Alloy rims are lighter in weight, have smaller inertial resistance, higher manufacturing precision, and less deformation at high speeds, which helps improve the vehicle's straight-line driving performance, reduces tire rolling resistance, and consequently decreases fuel consumption. 4. The thermal conductivity of alloy materials is about three times that of steel, providing better heat dissipation, which can have a positive effect on the vehicle's braking system, tires, and the thermal attenuation of the braking system.

19

1

Share

Where is the Car Tire Pressure Monitoring Located?

Tire pressure monitoring devices can be divided into built-in tire pressure monitoring and external tire pressure monitoring based on the installation position of the sensor. The built-in type has its sensor installed inside the tire, replacing the original valve stem, while the external type adds a sensor outside the valve stem. Tire Pressure Monitoring: Tire pressure monitoring involves real-time automatic monitoring of tire pressure during vehicle operation, alerting drivers to tire leaks or low pressure to ensure driving safety. Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the pressure data for each tire. The system automatically alerts when tire pressure is too low or there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, resulting in faster rotation compared to other wheels. By comparing the rotational speed differences between tires, the system monitors tire pressure. Indirect tire pressure alert systems essentially rely on calculating the rolling radius of tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): TPMS combines the advantages of both systems mentioned above. It equips direct sensors in two diagonally opposite tires and includes a 4-wheel indirect system. Compared to a full direct system, this hybrid system reduces costs and overcomes the indirect system's inability to detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time pressure data for all four tires as effectively as a direct system.

5

0

Share

How to Reset the Tire Pressure Monitoring on Volkswagen Tayron?

Method to reset the tire pressure light on Volkswagen Tayron: First, turn on the ignition, press and hold the tire pressure monitoring reset button until you hear a "ding" sound, then release. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. There are three commonly used tire pressure monitoring methods: Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the tire pressure data for each tire. Indirect Tire Pressure Monitoring: When the air pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, resulting in a faster rotation speed compared to the other wheels. By comparing the differences in rotation speeds between the tires, the system monitors the tire pressure. Introduction to Tire Pressure Monitoring System (TPMS): It combines the advantages of both systems mentioned above. Direct sensors are installed in two diagonally opposite tires, and a 4-wheel indirect system is also equipped.

11

5

Share

What are the five driving modes of the BYD Han DM?

What are the causes of unstable idle speed?

Which country produces Mitsubishi engines?

Does the 2019 Bora have front and rear anti-collision beams?

What is the size of the Magotan's wheel rims?

Where is the Car Tire Pressure Monitoring Located?

How to Reset the Tire Pressure Monitoring on Volkswagen Tayron?

How to reset the tire pressure monitoring indicator on the Magotan?

What is the tire model used in the Volkswagen Santana?

Which is Better: Wet or Dry Dual Clutch?

How to Install an ETC Device?