What are the first maintenance items for the SAIC Volkswagen Lamando?

What Causes Severe Engine Shaking During Startup?

Severe engine shaking during startup can be attributed to the following specific reasons: 1. Excessive carbon buildup in the throttle body, fuel injectors, or intake passages may be one of the causes. 2. When there is too much carbon deposit inside the engine, the gasoline sprayed by the cold-start injector can be largely absorbed by the carbon deposits, resulting in an excessively lean air-fuel mixture during cold starts and causing startup shaking. 3. Mechanical failures in components such as ignition coils, spark plugs, or fuel injectors, leading to cylinder misfires; low fuel pressure or cylinder pressure, resulting in insufficient power. 4. Oxidized or low-grade engine oil, primarily due to poor low-temperature fluidity, leading to inadequate cold-start protection for the engine.

14

2

Share

What Are Some Simple Methods to Remove Car Stickers?

Here are some simple methods to remove car stickers: 1. Use a household hairdryer set to the hot air setting. Direct the hot air at the sticker until the adhesive softens, then peel the sticker off the car body. 2. Dip a towel in some essential balm and rub it evenly over the sticker surface. Wait for a while, then peel the sticker off directly. 3. Use a specialized adhesive remover. Spray it on the sticker surface, then peel the sticker off directly. However, be cautious when using this method on glass with sun protection film. If the sticker is not carefully removed, residual adhesive may remain on the car body. To remove the adhesive, you can try the following methods: 1. Soak a towel in alcohol and wipe the residual adhesive area to remove it. 2. Using an eraser is also a simple method. Just rub the residual adhesive with the eraser to remove it. 3. Use some tar remover, but make sure to wear gloves to avoid skin contact with the cleaning agent.

16

1

Share

What Items Should Be Placed in a New Car?

New cars require the following items to be added: 1. Car floor mats: Car floor mats are highly practical, not only allowing you to decorate the car according to your preferences but, most importantly, providing protection. 2. Parking contact number plate: Parking spaces are becoming increasingly scarce these days, and sometimes you can't avoid parking on the roadside. In such cases, a parking contact number plate is essential. With this plate, others can quickly contact you to resolve any issues. 3. Steering wheel anti-theft lock: It's crucial to equip a new car with a steering wheel anti-theft lock, as it significantly increases the difficulty of theft. 4. Dash cam: A dash cam functions like the 'black box' on an airplane, continuously recording driving conditions and even capturing audio inside the car. Moreover, in cases of malicious fraud or traffic accidents, the footage recorded by the dash cam can serve as strong evidence.

17

1

Share

How to Check if a Car Compressor is Good or Bad?

Methods for checking the condition of a car compressor are as follows: 1. Checking the compressor's sealing performance. 1. Since refrigerant has strong permeability, the sealing performance of the compressor greatly affects the air conditioning system. 2. Method for checking the compressor's sealing performance: Use a manifold gauge to test. Connect the high and low-pressure hoses of the manifold gauge to the compressor's high and low-pressure service valves respectively. Start the engine and let it run at idle speed at 2000r/min. When the compressor is working normally, you can hear the metal sound of the piston movement inside the compressor. The normal working low-pressure reading is 0.15~0.20MPa, and the high-pressure reading is 1.42~1.47MPa. 2. Checking the compressor's operating condition: 1. Check if the drive belt is broken or loose. If the drive belt is too loose, it will slip, accelerate wear, and fail to transmit power. 2. Check if there is any noise inside the compressor.

7

1

Share

When to Use ECO Mode?

ECO mode is used when you want to reduce unnecessary fuel consumption, and it can be used in urban congested roads or on highways. ECO mode is the energy-saving mode of a car. When ECO mode is activated, the vehicle will make adjustments: the throttle opening corresponding to the same accelerator pedal depth will be smaller, and the transmission will shift up earlier. The purpose is to control the engine speed through reasonable gear selection, thereby reducing unnecessary fuel consumption. Below are specific details about ECO: ECO is an English abbreviation, formed from the words Ecology (environmental protection), Conservation (energy saving), and Optimization (power). ECO mode is further divided into active ECO driving mode and passive ECO driving mode. When the ECO indicator light on the dashboard lights up, it indicates that the vehicle's economy mode has been activated. ECO mode is divided into active and passive types. The difference lies in the fact that the active type has its own button, allowing the driver to choose whether to activate it. When the driver presses the ECO mode switch, the dashboard indicator light will immediately illuminate, and the vehicle will automatically start adjusting settings, such as throttle opening, transmission shift logic, and air conditioning output power. The passive ECO mode does not have a dedicated button. When the dashboard ECO indicator light comes on, it is only a reminder function. ECO will automatically assess your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the ECO indicator light.

2

Share

What does 101W tire mean?

101W tire meaning: 101 refers to a maximum load capacity of 825KG, and W indicates a speed rating of 270KM/H. More information about tires is as follows: 1. Tires are circular elastic rubber products mounted on various vehicles or machinery for ground contact and rolling. 2. When replacing tires, it is necessary to use tires with the same size, speed rating, and load capacity as the original tires. 3. Tires help prevent severe vibrations and early damage to vehicle components, adapt to the high-speed performance of the vehicle, reduce noise during driving, and ensure driving safety, handling stability, comfort, and fuel economy. 4. Tires are often used under complex and demanding conditions and must have high load-bearing, traction, and cushioning performance.

9

2

Share

What are the first maintenance items for the SAIC Volkswagen Lamando?

What Causes Severe Engine Shaking During Startup?

What Are Some Simple Methods to Remove Car Stickers?

What Items Should Be Placed in a New Car?

How to Check if a Car Compressor is Good or Bad?

When to Use ECO Mode?

What does 101W tire mean?

What lights should be used when driving under poor lighting conditions at night without street lights?

Where is the coolant temperature sensor located on the Wuling Zhiguang?

What lights should be used when passing under an arch bridge at night?

What lights should be turned on when parking at night?