What are the features of the third-generation Haval H6 Max?

What is the best way to clean spark plugs?

Methods for cleaning spark plugs are as follows: 1. White vinegar cleaning: Place the spark plugs in a glass container, pour white vinegar until they are fully submerged. For mild carbon deposits, soak for 2-3 hours; for severe cases, soak for 4-5 hours. After soaking, gently scrub with a hard toothbrush to restore their original condition. Shake off the vinegar and let them air dry naturally. 2. Carburetor cleaner: Place the spark plugs head-down in a glass bottle, spray carburetor cleaner into the bottle (be careful with the angle to avoid splashing), ensuring the spark plugs are submerged, then cover the bottle. Since the cleaner is flammable, fire safety precautions are necessary. Wait for about half an hour, then remove the spark plugs from the bottle, spray carburetor cleaner while scrubbing with a toothbrush, and let them air dry or use a hair dryer. 3. Blue toilet cleaner: Soak the spark plug electrodes directly in pure toilet cleaner. You will see a lot of bubbles forming, which is a chemical reaction between the carbon deposits and the cleaner. Leave them in a ventilated area for 10 minutes until the bubbles diminish. If black carbon deposits remain, soak them again, then rinse with white vinegar (avoid water), and let them air dry. 4. Cleaning at a 4S shop or repair shop: This method is the simplest, but usually, they opt to replace rather than clean the spark plugs.

16

5

Share

Where is the ETC installation location?

The ETC installation location is in the upper middle part of the front windshield horizontally. For large vehicles such as trucks and buses, the installation location is in the lower middle part. For vehicles with built-in or later-installed explosion-proof film, which may affect the signal transmission of the microwave communication link, it should be installed on the microwave sunroof strip. For small passenger vehicles with fewer than 9 seats, it should be pasted on the windshield directly behind and slightly to the right of the rearview mirror. For medium and large buses, it should be pasted on the lower left corner of the windshield directly in front of the driver's seat. ETC Usage Notes: The ETC transaction sensing range is 8 meters, so you should maintain a distance of more than 10 meters from the vehicle in front to prevent automatic sensing and payment for the vehicle ahead. The ETC lane recognition speed is 20 kilometers per hour. Driving too fast may result in failure to read the vehicle's device information, leading to payment failure. When using a debit card linked to ETC, insufficient balance may also cause payment failure. ETC lanes are unmanned, with only an antenna hanging above the lane. No operation is required when passing through; just drive at a low speed. The device will automatically communicate with the antenna. Once the barrier gate lifts, it indicates successful communication, and the ETC device will emit a beep as a prompt. ETC Installation Notes: Do not obstruct the view. Many modern vehicles have windshields with a steep rearward tilt, which can reduce the driver's field of vision. If this is not considered during ETC installation, it may increase the driver's blind spots. Install it behind the rearview mirror on the right side to avoid obstructing the view. Do not interfere with charging. The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a built-in solar panel on the back for self-charging. Therefore, avoid installing it on the blackened areas of the windshield or in positions where the solar panel may be easily obstructed. Once installed, do not remove it arbitrarily. The button in the middle of the adhesive is an anti-tamper lever connected to a switch. After installation, the windshield will press the anti-tamper lever in. If removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. The installation height should be no less than 1.2 meters and no more than 2.5 meters. The installation angle should be between 30° and 90° (the angle between the surface of the electronic tag and the horizontal plane). Before installation, clean the front windshield to ensure the glass surface is smooth, clean, and dry.

8

0

Share

How to Check the Date on Mercedes Headlights?

The stamp is usually located at the lower left or lower right corner of the headlight, and the production date of the headlight can be directly seen from the stamp. You can consult the headlight manufacturer. If no relevant stamp is found, you should consider whether the headlight is a counterfeit product.

9

1

Share

How to Set Chinese Language in Ford Edge?

On the Ford steering wheel, select the left button and press it once. Navigate to the Settings option button in the center console menu and click to enter. Within the Settings options, locate the Vehicle-Settings button and click to proceed. On the current interface, find the option labeled Language and click to open it. After entering the language menu, select Simplified Chinese to switch the dashboard display to Chinese.

4

1

Share

How to Check if Car Insurance is Purchased?

Directly call the customer service hotline of the underwriting company, provide the policyholder and vehicle owner's identity information, and let the customer service representative assist with the inquiry. You can also use other official channels of the company, such as WeChat official accounts, mobile apps, or the official website to check. Alternatively, you can visit the insurance company's branch counter with the policyholder's valid ID card to inquire, although this method is more cumbersome.

10

2

Share

How to Adjust the Height of Honda Car Seats?

Open the car door to see the switch on the side of the seat. To adjust the seat forward or backward, first lift the horizontal lever below. To adjust the seat height, move the inner handle. To adjust the seat back angle, lift the inner handle. The back angle of the passenger seat also requires lifting the inner handle to adjust. Lift the horizontal lever below to adjust the front and rear position of the passenger seat.

8

2

Share

What are the features of the third-generation Haval H6 Max?

What is the best way to clean spark plugs?

Where is the ETC installation location?

How to Check the Date on Mercedes Headlights?

How to Set Chinese Language in Ford Edge?

How to Check if Car Insurance is Purchased?

How to Adjust the Height of Honda Car Seats?

How to Reset the Trip Mileage?

Why Does a Turbocharged Car Lack Power?

What Lights Should Be Turned On When Driving in the Rain?

How soon can I take the Subject 4 test after passing Subject 3?