What are the features of the new Teana?

How often should a major car maintenance be performed?

Major car maintenance is typically performed every three years or 60,000 kilometers. The main components of a major car maintenance include: 1. Oil change. An oil change is a mandatory part of major maintenance. Engine oil lubricates and reduces friction, aids in cooling, seals against leaks, prevents rust and corrosion, and provides shock absorption. 2. Oil filter replacement. The oil filter is replaced at the same time as the oil. The oil filter removes debris, sludge, and moisture from the oil, delivering clean oil to the lubrication points. 3. Air filter replacement. The air filter prevents dust and particles from being drawn into the engine during the intake process. If the filter is not cleaned regularly, dust can enter the engine, causing abnormal wear on the cylinder walls. 4. Cabin air filter replacement. If the cabin air filter is not cleaned or replaced for a long time, the car's air conditioning system can become contaminated, reducing the performance of the cooling system and potentially affecting the health and safety of passengers.

10

3

Share

How to reset the maintenance light on a BMW X3?

You can reset it through the central control display screen. Here are the specific operation steps: 1. First, press the ignition switch to start the vehicle. 2. Then, click the MENU button on the central control panel. 3. Vehicle information will be displayed on the central control screen. 4. Next, press and hold the cancel button on the multifunction steering wheel. 5. The vehicle maintenance information will then be reset, and you can see the maintenance reminder light on the central control turn off. Below is some relevant information about the maintenance light: 1. It records the mileage of some crucial components, similar to a timer in a sprint race. 2. It serves to remind both the car owner and vehicle maintenance personnel. If relevant parts are replaced, the corresponding vehicle maintenance light will be reset.

7

5

Share

What Causes the Steering Wheel to Be Off-Center After Tire Replacement?

The reason for the steering wheel being off-center after tire replacement: The difference in wear between new and old tires can cause the vehicle to pull to one side. Solution for the steering wheel being off-center after tire replacement: Have a four-wheel alignment performed at a 4S shop or repair facility. Additional information about four-wheel alignment is as follows: 1. Four-wheel alignment is based on the four-wheel parameters of the vehicle, with adjustments made to ensure good driving performance and a certain level of reliability. 2. For cars, the installation of the steering wheels, steering knuckles, and front axle has a specific relative position. This installation with a specific relative position is called steering wheel alignment, also known as front-wheel alignment. Similarly, the rear wheels also have a relative position in their installation with the rear axle, known as rear-wheel alignment.

11

4

Share

How to Replace the Key Battery for Nissan X-Trail?

Method for replacing the key battery of Nissan X-Trail: 1. Press the button on the back of the key to remove the mechanical key; 2. Use a plastic pry tool or a cloth-wrapped flathead screwdriver to remove the battery cover; 3. Remove the key battery for replacement. Avoid touching the internal circuits and electronic connectors, as this may cause malfunctions. Hold the battery by its edges; grabbing the battery across the contacts can significantly reduce its stored power; 4. When installing the battery, ensure the positive side faces the bottom of the casing. Then, follow steps one and two to close the cover. Finally, press the button to check if the functions are working properly. Advantages of Nissan X-Trail: 1. Spacious interior; 2. Strong power; 3. Good steering wheel control and clear visibility; 4. High comfort.

14

5

Share

Car Remote Key Matching Steps?

Car remote key matching steps are as follows: 1. Insert the key and turn the switch on. The security light will illuminate for ten minutes. Within the time frame after the security light turns off, turn the ignition switch off and then on again. The warning light will illuminate for approximately ten minutes. 2. Match the new key with the 'code' in the car. Once matched, the new key can be used, while the old key will no longer function. Additional information about car remote keys is as follows: 1. The remote key utilizes the wireless remote control function of the central locking system, allowing for remote unlocking and locking from a distance, regardless of day or night, without needing to locate the keyhole. 2. The system mainly consists of two parts: the transmitter and the receiver.

5

2

Share

The Difference Between H and V on Tires?

The differences between H and V on tires are as follows: 1. H indicates a safety speed limit of 210 kilometers per hour; V indicates a safety speed limit of 240 kilometers per hour. 2. V also represents a higher safety factor and is often used in international racing events, while H is only used in daily transportation vehicles. More information about tires is as follows: 1. The function of a tire is to support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions. 2. Tires transmit traction and braking torque, ensuring good adhesion between the wheels and the road surface to improve the car's power, braking, and passability.

8

2

Share

What are the features of the new Teana?

How often should a major car maintenance be performed?

How to reset the maintenance light on a BMW X3?

What Causes the Steering Wheel to Be Off-Center After Tire Replacement?

How to Replace the Key Battery for Nissan X-Trail?

Car Remote Key Matching Steps?

The Difference Between H and V on Tires?

How to Check for Car Air Conditioning Leaks?

How much engine oil does the Ford Edge require?

Why Must Overtaking Be Done on the Left Side?

Which is the brake and which is the accelerator in an automatic transmission?