What are the features of the Geely Vision manual transmission?

1 Answers
DiJonathan
07/29/25 7:50pm
Currently, the Geely Vision manual transmission model has a total of five gears. First gear: Start in 1st gear, keeping the RPM below 2000 and accelerating as gently as possible. First gear is generally used only when starting or turning. Second gear: Use 2nd gear at speeds between 20-40 km/h. The engine torque is moderate, and noise is relatively low, making it suitable for normal driving. Third gear: Use 3rd gear at speeds between 40-60 km/h. At 2500-3500 RPM, the engine torque is ideal for overtaking or climbing steep slopes, but fuel consumption increases and engine noise becomes louder. Fourth gear: Use 4th gear at speeds between 60-75 km/h. In this range, maintaining RPM above 3500 for extended periods is not recommended, as it leads to extremely high fuel consumption and significant noise (except for some high-revving engines). This gear is typically used only for engine stress testing or high-speed overtaking. Fifth gear: Use 5th gear at speeds above 75 km/h.
Was this review help?
12
5
Share
More Forum Discussions

Should the brake be released quickly or slowly in an automatic transmission?

In an automatic transmission, the foot brake should be released smoothly. Here are the details: 1. When starting: Utilize the creep phenomenon (refers to the tendency or slight creeping sensation of the vehicle moving when the gear selector of an automatic transmission car is placed in D or R gear and the engine is idling, and the brake pedal is released. This is a unique phenomenon of automatic transmission cars) to start the vehicle slowly. 2. Precautions: During the process of releasing the handbrake when starting, the foot brake should still be pressed to prevent the engine speed from increasing and causing a sudden start. When releasing the foot brake, it should be done continuously and slowly, otherwise the car may lurch forward.
14
5
Share

Do car wraps need to be registered with the vehicle management office?

Transparent car wraps do not require registration. However, color-changing wraps need to be registered with the vehicle management office. According to current motor vehicle registration regulations, if the area of color change does not exceed 30% of the vehicle's surface, no registration is required. If the color change exceeds 30%, it must be registered, and the new color must be one that was originally registered when the vehicle left the factory. Steps for registering a car wrap: 1. Fill out the "Motor Vehicle Modification Registration Application Form" and submit the "Identity Proof of the Vehicle Owner and Driver," "Motor Vehicle Registration Certificate," "Motor Vehicle Driving License," and standard photos of the vehicle for which the modification is being applied. 2. Modifications such as body color, engine, fuel type, and frame number are allowed, but three colors are reserved for special vehicles and cannot be used: red for firefighting, yellow for engineering rescue, and white over blue for national administrative law enforcement. Replacing the front bumper, which alters the vehicle's shape, can be done after approval, but modifications like raising the chassis to enhance off-road performance are not permitted. If any illegal modifications are discovered during the annual inspection, they must be reverted to the original state. 3. Modifications such as widening tires, altering the intake system, or modifying the exhaust system are not allowed. According to the "Motor Vehicle Registration Measures" issued by the Ministry of Public Security, changing tire specifications, intake systems, or exhaust systems are not permitted modifications. Such modifications may alter engine power and affect driving safety. Owners of illegally modified vehicles will be fined 500–1,000 yuan and ordered to restore the vehicle to its original condition.
3
1
Share

Does Flooring the Gas Pedal Damage the Car?

Flooring the gas pedal damages the car. Introduction to Flooring the Gas Pedal: Flooring the gas pedal refers to pressing the accelerator all the way down while driving, making it seem like the pedal is stuck to the floor. This practice is generally not recommended as it poses extremely high risks and can damage the engine (especially in new cars). Flooring the gas pedal is typically used during speed tests or races, but some performance cars behave differently and may easily cause tire burnouts. Benefits of Using Flooring the Gas Pedal: Flooring the gas pedal provides lubrication and maintenance benefits for wooden floors and can also be used for the care and maintenance of wooden furniture. While driving, it makes pressing the accelerator easier.
16
5
Share

Will a Single Point of Speeding Result in a Fine for Cars?

If a car exceeds the speed limit by more than 10% at a single point, it will be fined. Below is a detailed introduction regarding vehicle violations: 1. Overview: Vehicle violations refer to actions where motor vehicles contravene the Road Traffic Safety Law and traffic management regulations. Penalties for vehicle violations include warnings, fines (vehicle impoundment), temporary suspension of the driver's license, revocation of the driver's license, cancellation of the driver's license, administrative detention, and criminal liability for actions that constitute a crime. 2. Basis for Penalties: The Road Traffic Safety Law of the People's Republic of China stipulates that traffic management departments of public security organs and their traffic police should promptly correct road traffic safety violations. Penalties for road traffic safety violations should be imposed based on facts and the relevant provisions of this law.
13
5
Share

What are the test items for Subject 2 in Shenzhen?

Subject 2 test items in Shenzhen include reversing into a garage, parallel parking, stopping and starting on a slope, etc. Below is a detailed introduction to the Subject 2 test: 1. Overview: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is referred to as the field driving skills test. The test items for small cars (C1/C2) include five mandatory items: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving along a curve. 2. Others: If the first attempt at the Subject 2 test is unsuccessful, a retake is allowed. If the retake is not taken or is still unsuccessful, the test is terminated, and the applicant must reschedule the test after ten days. Within the validity period of the driving skills test permit, the number of rescheduled tests for Subject 2 and Subject 3 (road driving skills test) must not exceed five times.
1
5
Share

What are the reasons for the backlight of the Bora dashboard not lighting up?

There are many reasons why the dashboard lights of a car may not light up, including a blown fuse in the dashboard, a dead car battery, excessively bright external lighting, or the car lights not being turned on. The specific details are as follows: 1. Blown fuse in the dashboard: If the fuse in the dashboard is blown, it will not only cause the dashboard lights not to light up but also prevent the dashboard needles from moving. In this case, a new fuse needs to be replaced to avoid unnecessary trouble caused by the dashboard not functioning properly. 2. Solution: First, check the power supply fuse of the dashboard; if it is blown, it can be replaced. Then, disassemble the dashboard; the lighting bulbs are usually located at the back of the dashboard. Replace the bulbs that are not lighting up. Generally, if individual bulbs are not lighting up, it indicates that the fuse and wiring are not the issue.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.