What are the features of the Enclave?

1 Answers
SarahFitz
07/29/25 9:59pm
Enclave features are as follows: Electronic Stability Program (ESP): Can be manually turned off in conditions like rain, snow, or muddy roads. Normally, it should be turned on to prevent skidding or fishtailing. Parking Radar/Image: The central display shows the rearview image, and the radar will sound an alarm when detecting nearby obstacles. Auto Start-Stop: At traffic lights, the engine is briefly turned off. When the driver's foot leaves the brake pedal, the vehicle will restart. Recirculation/Fresh Air Mode: Recirculation mode means the air inside the car is circulated in a closed loop, while fresh air mode exchanges air inside and outside the car. Use recirculation mode in environments with heavy exhaust, dust, or smog, such as during traffic jams. On highways, switch from recirculation to fresh air mode periodically, and avoid using recirculation mode for more than one hour at a time.
Was this review help?
5
5
Share
More Forum Discussions

How to Change a Spare Tire on a Volkswagen?

Remove the wheel by first loosening the fixing screws with a wrench, then lift the car to an appropriate height to remove the screws, and finally take the wheel off the hub. Deflate the removed wheel, remove the balancing weights on the rim, and use a tire changer to separate the tire from the rim. Use the same method to secure the installed tire on the tire changer. During the process of inflating the tire after installation, two popping sounds will be heard, indicating that the tire is in place. Adjust the tire pressure for each tire, reset the tire pressure, and finally perform a test drive.
9
3
Share

How to Flip Up the Front of a Chenglong M3 Truck?

Generally, there is a smaller handle next to the truck cab, which is the safety pin. You need to pull it first. Then press the larger handle to flip it up. However, different types of trucks may have different operation methods.
18
3
Share

How to Restore Plastic Damaged by Perfume?

Dip some Baihua oil on the stain, then gently wipe it with a soft cloth, starting lightly and gradually increasing pressure until the stain is just removed. You can also apply some toothpaste and gently scrub with a toothbrush, which will remove many of the stains.
20
3
Share

How to Adjust a Car Steering Wheel That is Off to the Right?

Adjust it from the tie rods on the steering gear—tighten one side and loosen the other to align the steering wheel. If the steering wheel is off by just one spline tooth, you can also remove the steering wheel and rotate it by one tooth to correct the angle.
1
3
Share

How to repair the power folding mirror of CX5?

Prepare the tools needed for disassembling the Bora's mirror. Follow the wiring harness to locate the connector of the tweeter, then gently unplug it by hand. Find the connector of the mirror's wiring harness and unplug it by hand as well. There are three small screws in total. Take out a Phillips screwdriver and use it to remove these three screws. Make sure to keep the removed screws safe. Simply hold the base of the mirror with your hand and gently pull it outward. This will separate the mirror from the door panel.
20
2
Share

How to perfectly solve the steering gear noise issue in the Mazda Atenza?

The cause of abnormal noise when turning the steering wheel should be determined based on the specific location from which the sound originates. If the noise occurs only after activating the turn signal switch and then turning the steering wheel, it is likely the sound from the return spring of the turn signal auto-return mechanism. If the noise is heard from beneath the steering wheel whenever the steering wheel is turned, whether stationary or while driving, the steering column dust cover should be inspected. If the noise seems to come from beneath the steering wheel during rotation, it may be due to the universal joint in the steering column.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.