What are the features of the 2021 Sagitar Beyond Edition?

1 Answers
DeHarley
07/29/25 10:34pm
2021 Sagitar Beyond Edition features include engine start-stop switch, tire pressure monitoring, one-button start, safety lock, etc. Engine Start-Stop: After the vehicle starts, once the speed exceeds 3km/h (approximately 2mph) and lasts for about 4 seconds, the engine start-stop function will automatically activate. The benefit of this function is that through automatic engine start-stop, it can save fuel consumption and reduce vehicle exhaust emissions without changing the driver's driving habits. Tire Pressure Monitoring: The tire pressure monitoring system continuously monitors the tire pressure status of all four tires. If any tire pressure shows an abnormality, it will trigger an alarm. One-Button Start: The one-button start system is part of the smart car features, enabling a simplified start and shutdown process with a single button. Safety Lock: When triggered, it disables the window lift buttons on the rear doors, and the yellow indicator light in the button will illuminate.
Was this review help?
13
1
Share
More Forum Discussions

Do Suspension Noises Caused by Low Temperatures Require Replacement Parts?

Suspension noises caused by low temperatures do not necessarily require replacement parts. The need for replacement should be determined based on the actual situation. Suspension noises caused by low temperatures are usually related to transmission issues. Transmission noises are relatively complex, and the sounds produced vary depending on the cause of the fault. They are generally categorized as gear noise, bearing noise, or dry friction noise due to insufficient lubrication. Severely loose or damaged bearings should be repaired or replaced, while dry friction noise can often be resolved by applying lubricating oil. The suspension refers to all the force-transmitting connection devices between the vehicle frame and the axles. It supports the vehicle body and also reduces the transmission of vibrations when driving over bumpy roads, enhancing comfort for passengers inside the vehicle.
3
1
Share

How to use the cruise control on Audi A6?

Audi A6 cruise control usage method: Pushing the cruise control wheel backward cancels and turns it off, pulling it forward activates and resumes, lifting it up increases the set speed value, pressing it down decreases the set speed value. To check if the cruise control is on, look for the green icon on the speedometer; if it's lit, the cruise control is active. The Audi A6 has body dimensions of 4951mm in length, 1886mm in width, and 1483mm in height, with a wheelbase of 2925mm. The TFSI engine equipped in all Audi A6 models delivers greater output power and torque while further improving fuel economy and reducing exhaust emissions.
4
2
Share

What is the difference between Audi RS and S series?

Audi RS and S series differ in production: The Audi RS series is specially developed by Audi's sports department and is not produced on the same assembly line as regular models; the S series is not specially developed by the sports department and shares the same production line with standard Audi models. Taking the Audi RS7 as an example: it is a mid-to-large-sized sedan with a maximum engine power of 412 kW, equipped with an 8-speed automatic transmission. The car's dimensions are 5012mm in length, 1911mm in width, and 1414mm in height, with a wheelbase of 2920mm, a top speed of 250 km/h, and a fuel tank capacity of 75L.
17
3
Share

What are the complete steps for left reverse parking with one full turn and 90 degrees?

Depress the clutch and brake, shift into first gear, release the brake and clutch to start. Slowly exit the parking space. When the car's center pillar aligns with the left corner of the parking space, turn the steering wheel one full turn to the left plus 90 degrees. When the inner left door handle aligns with the yellow stop line, depress the clutch and brake, shift to neutral, and stop without straightening the steering wheel. Depress the clutch and brake, shift into reverse gear, turn the steering wheel approximately 15 degrees to the left again, release the brake and clutch to start. Reverse into the parking space. When the car body is parallel to the parking space lines, depress the clutch and brake, stop, and shift to neutral.
2
3
Share

What is the standard tire pressure for the Haval H6?

The standard tire pressure for the Haval H6 is 2.4-2.5bar. Below is some related knowledge about tire pressure: Factors affecting tire pressure: In winter, the standard tire pressure should be appropriately increased by about 0.2bar; in summer, follow the lower limit of the standard tire pressure. If the car is parked outdoors in summer, the pressure can generally be about 0.1bar lower than the standard to avoid tire blowouts due to high temperatures. Normal car tire pressure: The standard range is 2.4-2.5bar, reinforced tires are 2.8-2.9bar, and the maximum pressure should not exceed 3.5bar.
20
0
Share

What to Do When the Roof Lining of a Volkswagen Comes Off?

First, clean any stains or dust on the car roof lining to ensure the bonding surface is clean and dry. Any residual adhesive should also be removed. Apply adhesive evenly to both the roof lining and the car roof. It's recommended to apply adhesive to both surfaces for better bonding and higher heat resistance. After applying the adhesive, let it sit for 5-8 minutes to dry. The adhesive should be dry to the touch without sticking to your fingers before proceeding with the bonding process. Press the roof lining firmly in place and let it sit. If time permits, applying pressure for a longer duration will yield better results. After 24 hours, the adhesive will fully cure, ensuring the roof lining is securely attached.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.