What are the features of the 2021 Corolla 1.2T Elite Edition?

1 Answers
LaHarrison
07/24/25 8:36pm
In terms of interior, there are significant changes in small details, and the central control screen also differs. Below is an introduction to the Corolla: 1. Introduction: The Corolla, formerly translated as "Huaguan," is a brand of Toyota Motor. The Corolla is equipped with Michelin 215/45-R17 tires, TRD-Sportivo high-performance shock absorbers, TRD-TF4 17-inch sport rims, reinforced clutch, and high-performance brake pads, ensuring it has relatively ideal sports performance. 2. Space: The Corolla has also been lengthened in terms of body size, with its wheelbase reaching 2700mm after the extension. In terms of seating space, a tester with a height of 177cm adjusted the front seat to the lowest position, with one fist of headroom. When the tester moved to the rear seat, there was two fingers of headroom and one fist and three fingers of legroom. The floor bulge in the middle position of the Corolla's rear seat is very small.
Was this review help?
17
5
Share
More Forum Discussions

Which company produces the Arcfox car?

Arcfox is a new energy vehicle produced by Beijing Electric Vehicle Co., Ltd. (BJEV), which was initiated and controlled by Beijing Automotive Group Co., Ltd. (BAIC Group). Below are some details about Arcfox: Arcfox dimensions: Taking the Arcfox Alpha S 2021 525S as an example, its length, width, and height are 4930 mm, 1940 mm, and 1599 mm respectively, with a wheelbase of 2915 mm. The body structure is a 5-door, 5-seat hatchback. Arcfox powertrain: It is equipped with an electric motor with a total power of 160 kW and a total torque of 360 N·m, paired with a fixed gear ratio transmission. For suspension, the front suspension uses a MacPherson strut independent suspension, while the rear suspension uses a multi-link independent suspension.
16
0
Share

Is the 2022 Nissan Qashqai a three-cylinder or four-cylinder model?

2022 Nissan Qashqai models are equipped with a 2.0-liter 150 horsepower 4-cylinder naturally aspirated engine. The differences between three-cylinder and four-cylinder engines are as follows: Different number of cylinders: The biggest difference is the number of cylinders. A three-cylinder engine has one less cylinder than a four-cylinder engine, so it performs worse in terms of engine balance control, meaning it vibrates more during operation compared to a four-cylinder engine. It's like carrying a bucket of water with a wooden pole: is it more balanced with three people (1+2) lifting on both sides or with four people (2+2) lifting on both sides? Different fuel consumption: Secondly, since a three-cylinder engine has one less cylinder than a four-cylinder engine, it naturally consumes less fuel and is relatively simpler to maintain. Additionally, because the three-cylinder engine is smaller in size, the overall weight of the car is also reduced.
12
2
Share

Is Wuling Group a State-Owned Enterprise or a Central Enterprise?

Wuling Group is a state-owned enterprise, and SAIC-GM-Wuling Automobile Co., Ltd. is also a state-owned enterprise. Introduction to Wuling Automobile Company: SAIC-GM-Wuling Automobile Co., Ltd., officially established on November 18, 2002, is a large Sino-foreign joint venture automobile company jointly formed by SAIC Motor Corporation Limited, General Motors (China) Investment Co., Ltd., and Liuzhou Wuling Automobile Co., Ltd. Its origins can be traced back to the Liuzhou Power Machinery Factory established in 1958. Over the years of joint venture operation, the company has continuously expanded in scale and achieved sustained growth in production and sales, developing into an international and modern manufacturer of micro and small vehicles. Introduction to Liuzhou Wuling Company: It is a large state-owned sole proprietorship enterprise authorized by the Guangxi regional government and is one of China's top 500 manufacturing enterprises and top 500 informatization enterprises. 'Wuling' is the registered trademark and brand of Liuzhou Wuling Automobile Co., Ltd., and this logo has been fully authorized for use by SAIC-GM-Wuling.
16
4
Share

How Often Should BMW Spark Plugs Be Replaced?

BMW spark plugs generally need to be replaced every two years or 40,000 kilometers. If spark plugs are not replaced for a long time, it can cause various issues such as leakage in the vehicle's ignition system, increased fuel consumption, reduced power, and most importantly, difficulty in ignition, which affects the normal operation of the vehicle. Spark Plug Replacement Interval: Under normal maintenance conditions, spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it is recommended to follow the user manual. The following standards can be used as a reference for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for Replacing Spark Plugs: Open the hood and lift the plastic cover of the engine. Remove the high-voltage wires and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are cleaned thoroughly. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the high-voltage wires in the correct firing order and secure the cover.
16
0
Share

What does the yellow exclamation mark in Toyota C-HR mean?

When a yellow exclamation mark appears on the car dashboard, there are 4 possible scenarios: general malfunction, automatic transmission failure, abnormal tire pressure, or lighting system fault. Below is a detailed analysis of these 4 situations: General malfunction: A triangle with an exclamation mark inside indicates a malfunction in the vehicle's general performance, components, or functions. Possible causes include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor malfunction. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic transmission failure: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission malfunction or transmission lubricant level below normal range. Transmission fluid should be replaced promptly. Abnormal tire pressure: A horizontal line under parentheses with an exclamation mark in the middle represents the tire pressure monitoring warning light. This light illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting system fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the problem. There is also a red exclamation mark inside a circled parenthesis, which represents a brake system warning, mainly indicating brake system failure or low brake fluid level. The brake system should be inspected immediately to avoid accidents.
4
5
Share

What system does the highway ETC belong to?

Highway ETC (Electronic Toll Collection) translates to electronic road toll collection, which is a non-stop toll collection system. On highways, there will be one or more ETC lanes. ETC charging method: Through the dedicated short-range microwave communication between the vehicle-mounted RFID tag installed on the windshield and the microwave antenna in the ETC lane of the toll station, the system uses networking technology to conduct background settlement processing with the bank, thereby achieving the purpose of vehicles passing through bridge and road toll stations without stopping to pay tolls. Banks install this type of ETC express card with a 'pass first, charge later' approach. ETC application conditions are as follows: Provide the original and photocopies of the vehicle owner's valid ID card and vehicle license. The photocopy of the driving license must include the page with the most recent annual inspection stamp. Credit card application form, which will be used to bind the ETC card. After obtaining the credit card, swipe it twice and use the POS receipt to collect and install the ETC vehicle-mounted device for free at designated outlets. No fees are charged during this process. Applicants must be between 18 and 60 years old. The vehicle must be registered under the applicant's name. Below are the precautions for installing ETC: Do not block the view; it is best to install it behind the rearview mirror: Many car models have a large rearward tilt angle of the windshield, which reduces the driver's field of vision. If ETC installation does not consider this, it will increase the driver's blind spots. Install it on the right side behind the rearview mirror to avoid blocking the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a solar panel on the back for self-charging. Therefore, during installation, avoid the blackened areas on the windshield and positions that may block the solar panel. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After installation, the windshield will press the anti-removal lever in. If removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic sensing and paying for the vehicle ahead. The ETC lane recognition speed is 20 kilometers per hour. Driving too fast may result in failure to read the vehicle's device information, leading to failed toll deduction. When using a debit card bound to ETC, insufficient balance will also cause toll deduction to fail.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.