What are the faults of Rich New Energy?

1 Answers
LeIvan
07/29/25 10:40pm
Rich New Energy EC35 power battery failure, over 80% of the battery power may cut off at high speed, and it cannot move at 50% at low speed. The following is the relevant introduction about Rich New Energy: 1. Appearance: The appearance of the car is more practical, with a lot of blue paint decoration to indicate its identity as a new energy model. From the interior, the car's interior is also simple and practical, with a large central control screen as the biggest highlight, but it needs to be optional. In terms of configuration, it is equipped with front/rear parking radar, multimedia system, and front fog lights. 2. Power: In terms of power, the car is driven by pure electricity, with a maximum motor power of 60kw (82 horsepower) and a peak torque of 191 Nm. The transmission system is matched with a single-speed automatic transmission, and its maximum range is 242 kilometers.
Was this review help?
11
4
Share
More Forum Discussions

How to Identify a Faulty Truck Steering Gear?

Methods to identify a faulty truck steering gear: 1. Oil leakage from the upper cover or at the dust boots on both ends of the steering gear; 2. Unusual noises when turning the steering wheel while stationary, accompanied by irregular shaking on both sides; 3. Difficulty in controlling the direction, with the steering wheel not returning to center or the vehicle pulling to one side; 4. Heavy steering wheel with no improvement even when accelerating. If any abnormality is detected in the steering gear, it is essential to promptly visit a repair shop for inspection and maintenance to prevent affecting normal vehicle operation and creating safety hazards. The steering gear, commonly known as the steering box, is a crucial component for the steering function of a vehicle and an important guarantee for driving safety. Its role is to amplify the force transmitted from the steering wheel to the steering linkage and to alter the direction of force transmission.
20
1
Share

Where is the OBD connector located in the old Jetta?

The OBD connector in the old Jetta is located above the clutch pedal. Open the cover outside the fuse box, and it is on the right side of the fuse box base. The OBD system is mainly used to diagnose the vehicle's operating conditions. It continuously monitors whether the vehicle's emissions exceed the standard. If they do, it will immediately issue a warning. The Jetta is a car brand under FAW-Volkswagen Automotive Co., Ltd., a joint venture of the German Volkswagen Group in China. The vehicle is equipped with an EA211 series engine, with body dimensions of 4501mm in length, 1704mm in width, and 1469mm in height, and a wheelbase of 2604mm.
2
2
Share

Is the Hanteng X7 New Energy a plug-in hybrid?

Hanteng X7 New Energy is a plug-in hybrid, equipped with a 1.8-liter turbocharged engine and electric motors. The 1.8-liter turbocharged engine of the Hanteng X7 New Energy delivers 170 horsepower and a maximum torque of 245 Nm, with the maximum power output achieved between 2,000 to 5,800 rpm and peak torque available from 2,000 to 4,000 rpm. The Hanteng X7 New Energy features an electric motor on the front axle and another on the rear axle: the front motor provides a maximum power of 15 kW and a maximum torque of 55 Nm, while the rear motor offers a maximum power of 53 kW and a maximum torque of 180 Nm. The dimensions of the Hanteng X7 New Energy are 4,671 mm in length, 1,902 mm in width, and 1,697 mm in height, with a wheelbase of 2,810 mm.
4
0
Share

How is Torque Generated?

Torque is generated by the explosive force produced in the engine cylinders. This explosive force drives the cylinders to perform work, and the downward motion creates a force. The force is transmitted through the connecting rod to the crankshaft, causing the crankshaft to rotate, thus forming what is commonly referred to as torque. Torque refers to the moment output from the crankshaft end of the engine. Under fixed power conditions, it has an inverse relationship with engine speed—the faster the speed, the smaller the torque, and vice versa. The unit of torque is Newton-meters (Nm). Torque reflects a vehicle's load capacity within a certain range. Comparing cars with the same type of engine, a higher torque output results in greater carrying capacity, better acceleration performance, stronger climbing ability, fewer gear shifts, and relatively reduced wear on the vehicle.
12
0
Share

Can a Class C driver's license drive a yellow-plate vehicle?

Can a Class C driver's license drive a yellow-plate vehicle? According to relevant regulations, the permitted vehicle types for Class C driver's licenses are: 1. C1 small and mini passenger vehicles, as well as light and mini cargo vehicles, and light and mini special-purpose vehicles; 2. C2 small and mini automatic transmission passenger vehicles and light and mini automatic transmission cargo vehicles; 3. C3 low-speed cargo vehicles; 4. C4 three-wheeled vehicles; 5. C5 small and mini automatic transmission passenger vehicles specially designed for disabled persons. A driver's license, also known as a driving license, is a document issued by the government transportation department to individuals who are qualified to drive, usually in the form of a card. The driver's license typically specifies the types of motor vehicles the holder is permitted to drive, such as motorcycles, passenger cars, trucks, buses, etc.
12
1
Share

How to Distinguish Between Imported and Domestic Cars?

Methods to distinguish between imported and domestic cars: 1. For the same model, check the rear of the car—domestic cars have Chinese characters, while imported ones have English. 2. Look at the Vehicle Identification Number (VIN), a 17-digit code. If the first letter is not 'L', it's an imported car. 3. Some car models from certain brands do not have domestic versions. Domestic cars refer to vehicles designed and manufactured by Chinese companies, possessing independent intellectual property rights and Chinese brand ownership. Imported cars are entirely manufactured abroad and shipped to China for sale, with no Chinese involvement in the technology or materials. Currently, there are two common types of imported cars: one is the officially authorized imports sold by 4S dealerships, known as China-spec cars. The other is vehicles imported through international channels by car dealers without official manufacturer authorization, referred to as parallel imports, which generally include U.S.-spec, Middle East-spec, Canada-spec, and Europe-spec models.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.