What are the factors affecting the technical condition of a car?

1 Answers
SanBrady
07/29/25 6:58pm
Main influencing factors are as follows: 1. Influence of road conditions; The condition of the road surface covering layer in the technical performance of road conditions has a significant impact on various assemblies of the car. Good road conditions lead to favorable operating conditions for the car; conversely, poor road conditions result in deteriorated operating conditions for the car. 2. Influence of operating conditions: Operating conditions are a factor affecting the usage of the car and its assemblies. For example, cars with the same load capacity driving in bustling urban areas versus suburban areas (road surface covering layer) experience a 50%-52% reduction in speed in urban areas compared to suburban areas; engine speed increases by 30%-36%; and the frequency of gearbox usage increases.
Was this review help?
19
5
Share
More Forum Discussions

What does the car AC switch indicate?

The car AC switch refers to the cooling switch of the onboard air conditioning system. When this button is pressed, the air conditioning compressor starts working, and the air blown out by the blower becomes cold. For example, during summer when you need to lower the temperature inside the car, press the AC button and then turn the temperature selector switch to the blue section to get cold air. If the car is equipped with automatic air conditioning, simply press the AC button followed by the AUTO button. The car air conditioning system is designed to regulate and control the temperature, humidity, air cleanliness, and airflow inside the vehicle cabin to optimal conditions, providing a comfortable environment for passengers, reducing travel fatigue, and creating favorable working conditions for the driver. It serves as a crucial ventilation device that plays an important role in ensuring safe driving.
8
4
Share

Can a car that uses 92-octane gasoline be filled with 98-octane gasoline?

A car that uses 92-octane gasoline can be filled with 98-octane gasoline, but 98-octane gasoline may cause incomplete fuel combustion, which not only consumes more fuel but also easily leads to engine carbon deposits. Strictly speaking, 92-octane and 98-octane gasoline should not be mixed, but due to its strong anti-knock properties, occasional mixing will not severely damage the car. Under normal circumstances, the gasoline octane rating should be selected according to the instructions provided in the vehicle's user manual, or the manufacturer's recommended gasoline octane rating can be found on the inside of the fuel tank cap. Using a higher-octane gasoline may not necessarily produce better results and could lead to unnecessary issues.
19
4
Share

What causes the steering wheel noise in Audi A3?

Main causes of steering wheel noise during turning: lack of lubrication in the steering column resulting in high friction, insufficient power steering fluid, universal joint failure, aging and hardening of the rubber bushings in the suspension stabilizer bar links, or damaged plain bearings. During subsequent driving, pay attention to the following points: Avoid turning the steering wheel while stationary: Avoid turning the steering wheel when the vehicle is stationary; try to steer only after the vehicle starts moving. After the vehicle comes to a complete stop, return the steering wheel to the central position to prevent the suspension system and tires from bearing unnecessary load. Avoid full-lock steering: When making a U-turn, try to avoid turning the steering wheel to its full-lock position.
16
1
Share

What to Do When the Car Windshield Is Covered with Frost?

The methods to deal with frost on the car windshield are: 1. Start the car, and when the engine coolant temperature rises, use the warm air to blow on the windshield until the frost melts; 2. Use a hard plastic scraper or a dedicated glass frost scraper to remove it; 3. Maintain the same temperature inside and outside the car; 4. Use a windshield cover to prevent frost. The methods to clean the car windshield are: 1. Wet the window glass with water, apply toothpaste evenly on the glass, gently wipe with a sponge, and rinse clean; 2. Dilute windshield washer fluid with water, pour it into a spray bottle, spray it on the glass, and wipe clean with a soft, lint-free cloth; 3. Spray a little water on the glass and wipe it back and forth with old newspapers.
20
1
Share

What model is the Audi fv71410ladcg?

Audi fv71410ladbg model is the Q2L 2018 35TFSI variant of Audi. Introduction to Audi: A German luxury car brand, recognized by its four interlocking rings logo, currently a subsidiary of Volkswagen Group. Main product lines include the A series (from 1 to 8), Q series (3, 5, 7), R series, and TT series (TT, TTS, TTRS), among others. Audi Service Philosophy: In pursuing its service philosophy, Audi not only strives to meet all customer needs but also aims for comprehensive customer satisfaction as the ultimate goal. Audi "delivers heartfelt joy through wholehearted excellence in service," embedding the core values of "professionalism, prestige, and pleasure" throughout the entire service process.
15
0
Share

How to fold down the rear seats of the Sagitar?

The rear seats of the Sagitar cannot be fully folded down, but only a 4/6 split folding is possible. They can be folded down from inside the car or by pulling the release lever in the trunk. Taking the Sagitar 2021 model as an example, its body dimensions are: length 4753 mm, width 1800 mm, height 1462 mm, wheelbase 2731 mm, fuel tank capacity 50 liters, and trunk capacity 553 liters. The Sagitar 2021 model is equipped with a 1.2T turbocharged engine, with a maximum horsepower of 116 hp, maximum power of 85 kW, maximum torque of 175 Nm, paired with a 5-speed manual transmission, and adopts MacPherson independent suspension and multi-link independent suspension.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.