What are the exterior dimensions of the Volkswagen Tayron?

What is the inspection method for the crankshaft position sensor?

The inspection method for the crankshaft position sensor is: unplug its wiring connector and use a multimeter to measure the resistance between each terminal on the sensor. The functions of the crankshaft position sensor are: 1. To control the engine ignition timing and confirm the signal source of the crankshaft position; 2. To detect the top dead center signal of the piston and the crankshaft angle signal; 3. To measure the signal source of the engine speed. The crankshaft position sensor is installed at the front end of the crankshaft, the front end of the camshaft, inside the distributor, or on the flywheel, and its structural forms include magnetic induction type, photoelectric type, and Hall type. The effects of a faulty crankshaft position sensor include: 1. The engine control unit cannot receive the reference signal; 2. The ignition coil cannot generate high voltage; 3. The vehicle cannot start.

2

1

Share

What is the AS button in the car?

The AS button in the car is for the automatic storage and playback function of the audio system. Relevant information is introduced as follows: 1. Car audio functions: Different car audio systems may vary in specific functions, but generally include: AS for radio automatic storage, PS for radio preset station preview, BAND for switching radio frequency bands, MODE for switching audio modes, DISP for display content switching, SCAN for radio and disc song preview, POWER for turning on/off, and DISC for disc mode. 2. Role of car audio: Car audio is a playback device installed to alleviate the boredom of drivers and passengers during travel. Nowadays, car audio systems have reached high standards in terms of sound quality, operation, shock resistance, etc., capable of handling the bumps on rough roads while ensuring stable performance and perfect sound quality.

12

1

Share

What are the symptoms of a misfiring cylinder in a 4-cylinder engine?

4-cylinder engine misfiring symptoms are as follows: 1. Abnormal shaking during engine operation. Misfiring disrupts the internal balance of the engine, leading to severe vibrations. The fewer the cylinders or the more cylinders misfiring, the more pronounced the shaking will be. 2. Reduced vehicle power and abnormal engine noise. Misfiring causes a sharp drop in engine power and, due to extremely unstable operation, is accompanied by unusual running noises. 3. Black smoke from the exhaust pipe. If the misfire is unrelated to the fuel supply system, fuel continues to be injected as usual. Unburned combustible mixture is expelled, appearing as black smoke due to incomplete combustion of carbon particles. 4. Difficulty starting and engine stalling. Misfiring can make the engine hard to start or even cause it to stall; this issue worsens with fewer cylinders or more misfiring cylinders.

3

0

Share

What is the eceed car?

eceed is the Exeed brand under Chery, and the models under Chery Exeed include the Exeed VX, Exeed TXL, Exeed LX, and Exeed TX. More related information is as follows: 1. The Exeed TXL is a mid-to-large-sized 5-door, 5-seat SUV with dimensions of 4780mm in length, 1885mm in width, and 1730mm in height, a wheelbase of 2800mm, equipped with a 7-speed dual-clutch transmission, and a top speed of 187 km/h. 2. The fuel tank capacity of the Exeed TXL is 55L, featuring front-wheel drive, tire specifications of 225/60R18, and equipped with features such as full-seatbelt reminder, tire pressure monitoring, electronic stability control, brake assist, fatigue driving alert, cruise control, and rear radar.

3

0

Share

How many liters of brake fluid should be changed at one time?

Generally, only 1~2L of brake fluid is needed for replacement. Here is some relevant information about brake fluid: 1. As one of the consumables, brake fluid naturally needs to be replaced regularly. If the water content in the brake fluid exceeds 5%, it should be replaced promptly. 2. Alternatively, brake fluid should generally be replaced every 40,000 kilometers or every 2 years. When replacing, it is essential to use brake fluid of the same grade as the original. If the original vehicle uses DOT4, only DOT4-grade brake fluid can be used. 3. When replacing brake fluid, it's important to pay attention to the replacement cycle, which varies depending on different climate conditions. Additionally, the choice of brake fluid is crucial—brake fluids from different brands should not be mixed.

16

3

Share

How to Remove Tire Bolts?

Steps to remove tire bolts are as follows: 1. First, use the onboard tools to remove the anti-theft cover, as it is difficult to remove by hand. 2. Use a socket wrench to loosen the nuts gradually in a diagonal sequence by turning counterclockwise. 3. Use a jack to align with the dedicated jack slot on the car chassis and lift the vehicle. 4. Then, remove the loosened nuts to take off the tire and replace it with a new one. Precautions for tire removal: 1. Professional tools must be used, as most vehicle models come with onboard tools. Using improper tools may lead to issues like stripped nuts. 2. Some run-flat tire models are very difficult to remove on your own. It is recommended to visit a nearby repair shop or call for roadside assistance. 3. Applying appropriate foot force can help tighten the nuts, but avoid reckless kicking to prevent direct damage to the nuts or bolts.

5

3

Share

What are the exterior dimensions of the Volkswagen Tayron?

What is the inspection method for the crankshaft position sensor?

What is the AS button in the car?

What are the symptoms of a misfiring cylinder in a 4-cylinder engine?

What is the eceed car?

How many liters of brake fluid should be changed at one time?

How to Remove Tire Bolts?

Where is the Hazard Light Fuse Located?

Which country is Wantuche tire from?

Why Can't the Clutch Pedal Be Depressed?

How Many Liters of Engine Oil Should a Volkswagen Lamando Add?