···
Log in / Register

What are the exterior dimensions of the Range Rover Evoque?

4 Answers
CalebDella
09/03/25 7:30am

The exterior dimensions of the Range Rover Evoque are 4371mm in length, 1904mm in width, and 1649mm in height, with a wheelbase of 2681mm. The Range Rover Evoque is an SUV equipped with a 2.0-liter inline 4-cylinder turbocharged engine, paired with a 9-speed automatic transmission, delivering a maximum power of 183kW, a maximum horsepower of 249PS, and a maximum torque of 365Nm. In terms of suspension, the front suspension of the Range Rover Evoque is a MacPherson strut independent suspension, and the rear suspension is a multi-link independent suspension. Externally, the front face of the Range Rover Evoque features complex lines, with an abstract grille embedded in the front face, and the engine guard gives a more crossover feel.

Was this review help?
8
3
Share
McClaire
09/16/25 2:08am

Having driven SUVs for years, I pay special attention to how dimensions affect the driving experience. The Land Rover Range Rover Evoque measures approximately 437 cm in length, 190 cm in width, 163 cm in height, with a wheelbase of 268 cm. This size proves exceptionally practical in urban settings: its moderate length makes parking effortless; the width isn't excessive, allowing easy navigation through narrow streets; and the height is just right, offering excellent visibility without compromising aerodynamics. In real-world use, the trunk accommodates several large suitcases with ease, making it more than sufficient for family trips. The well-designed wheelbase enhances stability during turns. Compared to larger SUVs, these dimensions translate to better fuel efficiency and reduced wind noise at highway speeds. If you're commuting daily in the city, the Evoque's dimensions hit a sweet spot, perfectly balancing space and maneuverability—one of the key reasons I recommend it.

Was this review help?
15
4
Share
Expand All
AubreeDella
10/30/25 2:41am

As a car enthusiast, I'm particularly passionate about discussing the significance of body dimensions on aesthetic appeal. The typical exterior dimensions of the Range Rover Evoque are 4370mm in length, 1900mm in width, and 1630mm in height, with a wheelbase of 2680mm. These proportions are fantastic: the width gives the car a stable and imposing presence, the lower height creates a sporty feel, and the length is kept within a reasonable range to avoid bulkiness. Although the dimension data seems simple, the design team utilizes it to optimize aerodynamics, reduce wind resistance, and enhance the streamlined appearance. In my opinion, when you compare these dimensions with those of similar SUVs, it's clear why the Evoque stands out—the Audi Q3 is slightly narrower, making the Evoque more visually striking and eye-catching on the road. The wheelbase length is crucial, ensuring comfortable interior passenger space, which is its secret weapon in becoming a fashion icon.

Was this review help?
12
1
Share
Expand All
DelBrody
12/13/25 2:49am

From a technical perspective, the standard exterior dimensions of the Range Rover Evoque include a length of approximately 4370mm, width of about 1900mm, height of around 1630mm, and a wheelbase of roughly 2680mm. These values are common references for most models, with minor variations possible in reality. These dimensions directly impact performance: the height provides sufficient ground clearance for light off-roading; the width influences handling stability with a smaller turning radius; a longer wheelbase increases interior legroom. The design combines urban and outdoor needs, with seemingly simple data containing profound considerations. The track width parameters ensure smooth driving, reflecting the wisdom of engineers.

Was this review help?
3
1
Share
Expand All
More Forum Discussions

What is Maybach?

Maybach is an ultra-luxury automobile brand, first established in the 1920s by Wilhelm Maybach, who was also one of the inventors of the world's first Mercedes-Benz car and one of the three main founders of Daimler-Benz. Maybach uses the Mercedes-Benz logo because it has been acquired by Mercedes-Benz and is now a high-end product under the Mercedes-Benz brand. Here is additional information about the history of the Maybach brand: 1. In 1919, Wilhelm Maybach and his son Karl Maybach created this legendary brand together. 2. In 1921, the first Maybach car, the W1, was introduced. Its exterior design can be described as a masterpiece, with exceptional craftsmanship, representing the pinnacle of German automotive engineering. 3. In 2011, due to poor market sales, Maybach ceased production entirely in 2013. 4. In November 2014, Mercedes-Benz officially launched the new sub-brand Mercedes-Maybach in Guangzhou, with the first model, the Maybach S-Class, making its debut.
17
1
Share

How to adjust the rearview mirror buttons for Subject 2?

Subject 2 rearview mirror adjustment method is: 1. Left rearview mirror adjustment: Divide the left rearview mirror into three equal parts horizontally and vertically. The door handle should be positioned at the intersection of the vertical midpoint and the one-third line closest to the car. 2. Right rearview mirror adjustment: Divide the right rearview mirror into three equal parts horizontally and two equal parts vertically. The door handle should be positioned at the intersection of the vertical midpoint and the one-third line closest to the car. Additional information: The functions of rearview mirrors are: 1. Observing rear road conditions. When driving in China, you often need to change lanes based on road conditions. Before changing lanes, first turn on the turn signal, then observe the situation of vehicles behind you through the interior rearview mirror, and change lanes only after confirming safety. 2. Checking the rearview mirror during emergency braking. When there is an urgent situation ahead requiring emergency braking, observing the center rearview mirror can inform you if there is a vehicle following too closely behind. This allows you to appropriately ease the braking based on the distance ahead to avoid a rear-end collision.
19
3
Share

What is the function of steel braided brake hoses on braking?

The function of steel braided brake hoses on braking is to effectively transmit hydraulic pressure to achieve braking performance. Below is extended information about steel braided brake hoses: 1. Concept: When a car is in motion, its four wheels continuously move up, down, left, and right. Suspension and steering movements cause the brake discs/drums and calipers enclosed within the wheel rims to move accordingly. Therefore, the entire brake hydraulic line cannot use rigid metal pipes. Instead, metal pipes are replaced with flexible rubber hoses. Although made of rubber material, these hoses are wrapped with a metal braided outer layer, hence the name "steel braided brake hoses." 2. Characteristics: They effectively improve braking performance. The construction of steel braided brake hoses consists of a rubber tube covered with high-strength steel wires, plus an additional outer layer for abrasion resistance, providing stronger resistance to expansion. Typically, original rubber hoses may expand slightly when the brake is pressed, weakening initial braking response. Replacing them with steel braided hoses can mitigate these issues.
12
5
Share

What are the symptoms of a faulty knock sensor in a car?

When the knock sensor in a car is damaged, the symptoms include: 1. Engine knocking occurs during operation. A faulty knock sensor can cause excessive ignition timing advance during engine operation, leading to engine knocking due to factors such as engine load, temperature, and fuel quality. 2. Decreased engine power, increased fuel consumption, accompanied by engine knocking. A damaged knock sensor affects the engine's load, resulting in higher fuel consumption and knocking sounds. Here is some information about the knock sensor in a car: 1. The knock sensor is an AC signal generator. It is used to detect the speed and position of the crankshaft, as well as vibrations or mechanical pressure. 2. The knock sensor is installed in various locations on the engine block or cylinders. When vibrations or knocking occur, it generates a small voltage peak; the more severe the knocking or vibration, the higher the peak produced by the knock sensor. A certain high frequency indicates knocking or pinging, and knock sensors are typically designed to measure frequencies in the range of 5 to 15 kHz.
15
2
Share

What to Do When There is Abnormal Noise During Car Ignition?

If there is abnormal noise during car ignition, the cause should be checked immediately and repairs should be carried out. The reasons for abnormal noise during car ignition and the corresponding solutions are: 1. Engine abnormal noise. The engine should be repaired promptly to prevent the fault from worsening. 2. Transmission abnormal noise. The car should be sent to a professional repair shop to identify the faulty component and replace it. 3. Wear-induced abnormal noise. Lubricant should be applied to the worn parts in time to prevent the fault from worsening. Additional Information: Methods for maintaining a car engine include: 1. Keep the crankcase well-ventilated. Regularly clean pollutants around the PCV valve. 2. Change the oil and filter regularly to avoid malfunctions. 3. Clean the crankcase periodically to maintain the cleanliness inside the engine. 4. Regularly remove rust and scale inside the engine to prevent excessive buildup that could cause engine blockage.
4
1
Share

Why Can the Driving Test Level 3 Be Taken After Just a Few Days of Practice?

Students who can take the Driving Test Level 3 have already passed the Level 2 test, so they have some driving experience. Moreover, the Level 2 test is indeed quite challenging as it assesses the students' basic skills such as clutch and brake control. Passing it indicates that the students have a solid foundation, making it easier for them to grasp the requirements of Level 3. They only need to familiarize themselves with some test items and road conditions. Here is some additional information: 1. Driving Test Level 3: It is part of the motor vehicle driver's license assessment, officially known as the Road Driving Skills and Safe & Civilized Driving Knowledge Test. 2. Test Content: The road driving skills test generally includes: preparation before starting, light simulation test, starting, driving straight, gear shifting operations, changing lanes, pulling over, going straight through intersections, turning at intersections, meeting other vehicles, overtaking, making U-turns, and night driving. The test content varies depending on the type of vehicle license being applied for.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.