···
Log in / Register

What are the exterior dimensions of the Jeep Grand Commander?

4 Answers
KarterRose
07/28/25 11:08pm
Length is 4873mm, width is 1892mm, height is 1738mm, and wheelbase is 2800mm. Here are the details of the Jeep Grand Commander: 1. It adopts Jeep's latest design language, with a front fascia resembling the newly released overseas version of the Cherokee, and the square-shaped front and body create a majestic and solid visual effect. 2. Interior layout: Offers both 5-seater and 7-seater versions, with the 7-seater version featuring a 2+3+2 seating arrangement. 3. Tire specifications: The tires are sized 235/60R18 and 235/55R19, and the large multi-spoke wheels enhance the vehicle's robust appearance. 4. Powertrain: Both the 5-seater and 7-seater models are equipped with two tuned versions of a 2.0T gasoline engine.
Was this review help?
16
5
Share
MacKhloe
08/12/25 2:29am
The Jeep Grand Commander's exterior dimensions are quite standard, with a length of approximately 4820 mm, a width of 1940 mm, a height of 1780 mm, and a wheelbase of around 2800 mm. As a family user, my household owns a Grand Commander, and its size ensures an incredibly spacious interior, easily accommodating seven people and luggage. During trips, the kids can play around in the car without feeling cramped. Its height is significantly taller than most sedans, offering an open view and a reassuringly stable ride on the highway. However, the larger size requires extra caution when parking in residential areas—I often measure the parking space before maneuvering, but the rearview camera is a huge help. On weekends, when taking the whole family out for picnics, the trunk effortlessly fits tents and stoves, striking a great balance between size and practicality.
Was this review help?
7
2
Share
Expand All
RiverRose
10/01/25 5:13am
I've been into off-roading for over a decade, and I've taken the Grand Commander out for some wild adventures. With dimensions like 4.8 meters in length, 1.95 meters in width, and 1.79 meters in height, plus a generous ground clearance of 220 mm, it easily conquers bumpy and rocky trails. The wheelbase of over 2800 mm enhances body rigidity, keeping it steady on mountain roads, and there's ample space for emergency toolkits and a spare tire. Compared to smaller vehicles, its size advantage is obvious, though fuel consumption is slightly higher. But the open view and stability during off-roading are addictive. The large size might be a hassle in crowded cities, but it truly shines in the wilderness—driving through deserts or muddy terrains feels especially thrilling.
Was this review help?
17
5
Share
Expand All
TannerFitz
11/14/25 7:01am
As a city commuter, I drive the Grand Commander to work every day, with dimensions of approximately 4820mm in length, 1940mm in width, and 1780mm in height. To be honest, it's manageable in traffic jams—the comfortable seats help relieve fatigue—but parking is a real headache. It often doesn't fit into roadside parking spots, forcing me to circle around to large mall garages. The upside is the high ride height reduces blind spots, and it feels stable on the highway without much sway. Despite its size, the steering isn't overly cumbersome, but I'd recommend installing a 360-degree camera for assistance. Driving in the city also requires picking the right days to avoid peak hours. On weekends, I occasionally take it out to the suburbs for a spin, and the spaciousness instantly feels liberating.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

Does mismatched speed and gear in Subject 3 result in point deduction or failure?

Mismatched speed and gear in Subject 3 will result in point deduction. The reason for speed-gear mismatch is that the clutch pedal isn't fully depressed during gear shifting. When shifting to a higher gear, the increased speed isn't detected by the system as a gear change signal, causing it to assume the vehicle remains in the lower gear, which naturally leads to point deduction due to speed mismatch. The key challenges in Subject 3 examination are as follows: 1. Speed-gear mismatch: Errors involving high gear at low speed or low gear at high speed must be avoided during the test. Before shifting gears, ensure the speed is adjusted to match the target gear. 2. Deviation in straight-line driving: Many candidates deliberately reduce speed due to concerns about maintaining a straight path, which is inadvisable. This actually increases the likelihood of trajectory deviation, so maintaining appropriate constant speed is crucial. 3. Parking over 30cm from curb: Subject 3 explicitly requires parking within 30cm of the curb, but this distance proves difficult for many candidates who often park too far from the roadside.
16
5
Share

What are the reasons for the squeaking noise in Volkswagen Polo's brakes?

There are several reasons for the squeaking noise in Volkswagen Polo's brakes: 1. ABS braking system producing noise: If the vehicle is equipped with an ABS braking system, the noise may originate from this system. This is because the ABS system activates under poor road conditions, making such noises normal in such scenarios. 2. Foreign objects in the braking system: It is advisable to check at a repair shop for any foreign objects that may have entered the braking system, as these can cause noise. 3. Abnormal operation of the brake caliper: The brake caliper pushes the brake pad to create friction against the brake drum for normal braking. The brake caliper is crucial to the braking system, and keeping it clean during daily driving is essential. If not cleaned regularly, accumulated debris can lead to various noises. 4. Excessive wear of brake pads: Brake pads are consumables. Under normal driving conditions, it's recommended to inspect the brake pads every 5,000 kilometers. Whether replacement is needed depends on the specific situation. Excessive wear of brake pads naturally results in noise.
7
3
Share

Must the front wheels cross the line when reversing into the left parking space?

When reversing into the left parking space, the front wheels must cross the line. Below are some key points to note for the Subject 2 driving test: 1. Reversing into the parking space: (1) Ensure you accurately observe the reference points and lines, and use the rearview mirror to monitor the distance between the car body and the line to avoid the car body crossing the line. (2) Do not stop the car before it is completely inside the parking space. Pay attention to the clutch to avoid stopping midway or not fully entering the parking space. After entering the designated area, park the car at the specified position, then proceed to reverse into the parking space. Exit in the opposite direction and reverse into the parking space again. Finally, exit towards the exit direction to complete the test. 2. Parallel parking: (1) When aligning with the parking space, be mindful of the distance between the car body and the space to avoid crossing the line. Also, be careful not to run over the corner of the parking space when exiting. (2) Remember to turn on the turn signal when exiting. After entering the designated area, align the car parallel to the parking space, drive to the front left of the parking space, and then proceed from the rear right.
3
1
Share

Where to Obtain the Vehicle and Vessel Tax Payment Certificate?

Vehicle and vessel tax generally does not issue invoices; the payment certificate for vehicle and vessel tax is the compulsory traffic insurance policy. The standards for vehicle and vessel tax have changed as follows: 1. Adjustment of tax payment time and location: The "Vehicle and Vessel Tax Law" changes the tax liability occurrence time from "the month recorded on the vehicle or vessel registration certificate or operation certificate issued by the vehicle or vessel management department" to "the month when ownership or management rights of the vehicle or vessel are obtained"; the tax payment location is changed from "designated by the provincial government" to "the registration location of the vehicle or vessel or the location of the withholding agent." 2. Improvement of tax incentives: In addition to retaining the original "Vehicle and Vessel Tax Provisional Regulations" that allow provincial, autonomous region, and municipal governments to provide periodic tax reductions or exemptions for public transport vehicles and vessels, new tax incentives for energy-saving and new energy vehicles and vessels have been added. 3. Optimization of the tax burden structure: First, the tax burden for large-displacement passenger vehicles has been increased, with higher taxes for larger displacements; second, trailers are calculated at 50% of the tax amount for trucks of the same curb weight; third, the tax burden for yachts has been significantly increased.
2
4
Share

Can the green book in the car be replaced if lost?

The green book in the car can be replaced if lost. Relevant information about the motor vehicle green book is as follows: 1. Definition: The car green book refers to the vehicle registration certificate. The vehicle registration certificate is a necessary property ownership document for the vehicle, issued by the vehicle management department of the public security bureau after completing the motor vehicle registration. It is kept by the vehicle owner and not carried with the vehicle. It is required to be presented when handling any vehicle registration procedures such as transfer or change of ownership, and records the relevant information of the vehicle, equivalent to the vehicle's household registration. 2. Notes: If the motor vehicle registration certificate is lost, missing, or damaged, it can be replaced. The vehicle must also be inspected. The vehicle management office should confirm the motor vehicle, review the submitted proofs and documents, and reissue or replace the motor vehicle registration certificate within one day from the date of acceptance. For motor vehicles registered before the implementation of the motor vehicle registration certificate that have not applied for it, the owner can apply for the motor vehicle registration certificate at the local vehicle management office. However, if the owner applies for changes, transfers, or mortgage registration, the motor vehicle registration certificate must be applied for at the vehicle management office before the application.
2
4
Share

What are the signs of a faulty clutch fork?

The manifestations of a faulty fork include bending and deformation of the fork; cracks or fractures in the fork; damage to the fork pin, or detachment of the fork from the fork shaft. A damaged fork can lead to difficulty in shifting gears or the inability to engage gears, necessitating timely inspection and replacement. Otherwise, it may affect the normal driving of the vehicle. Generally, the damage to the fork involves the enlargement of the groove at the upper end of the fork head, thinning or grooving of the contact surface at the lower end of the fork, and bending or twisting of the fork body at the lower part. Below is additional information about the clutch: 1. Clutch: The clutch is the assembly in the vehicle's transmission system that directly connects to the engine. Typically, the clutch is installed together with the engine crankshaft's flywheel group and serves as the component that cuts off and transmits power between the engine and the vehicle's transmission system. From starting the vehicle to normal driving, the driver can operate the clutch as needed to temporarily separate or gradually engage the engine and the transmission system. 2. Function of the clutch: Its role is to allow gradual engagement between the engine and the transmission, ensuring smooth vehicle starts; temporarily disconnecting the engine from the transmission to facilitate gear shifting and reduce impact during shifts; and acting as a separator during emergency braking to prevent overload in the transmission system and other drivetrain components, thereby providing a certain level of protection.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.