What are the exterior dimensions of the Highlander?

1 Answers
SanMaximus
07/28/25 5:46pm
The exterior dimensions of the Highlander are: length 4812mm, width 1913mm, height 1776mm, with a wheelbase of 2806mm. This vehicle leads in size, featuring muscular side lines that enhance its robust appearance. The explosive muscular lines make the body look more upright. The Highlander's wheel design is relatively tall, with a petal-shaped styling that gives it a youthful look. The rear incorporates numerous decorative lines, creating a rugged yet sexy effect. In the interior, the Highlander adopts a simple and elegant style with excellent expressiveness. The extensive use of silver materials and soft textures gives the cabin a very high-end feel.
Was this review help?
20
1
Share
More Forum Discussions

How to Switch Driving Modes in F7?

For the Haval F7, press the driving mode button to switch between Economy, Standard, Sport, and Snow modes. Below are the specific introductions to each driving mode: 1. Eco Mode: In this mode, the fuel injection volume and transmission control module are managed by the computer, which adjusts to the most fuel-efficient driving method. This mode offers the lowest fuel consumption but also the least power. Additionally, due to computer control over the transmission module, the throttle response becomes less sensitive, and the engine response is slower. 2. Comfort Mode: Also known as Standard Mode, it balances power and fuel efficiency. In this mode, both power output and air conditioning settings are optimized for energy saving, making it ideal for everyday driving. 3. Sport Mode: This mode is typically used in road conditions requiring higher power output. After switching to this mode, the battery's energy output increases significantly in a short time, and the traction and stability control systems reduce intervention in driving operations. This results in quicker vehicle response and more noticeable steering operations. This mode offers the highest fuel consumption but also the most powerful performance. 4. Snow Mode: This mode primarily works by limiting the vehicle's torque to reduce wheel spin and skidding when driving on snowy roads.
19
5
Share

Where is the trunk switch of Haval M6?

Haval M6's trunk switch is located at the headlight adjustment area, which is the button on the lower left side of the steering wheel. Below is the relevant introduction: 1. Haval M6: Haval M6 uses a front MacPherson and rear double-wishbone four-wheel independent suspension, which is rare in its class, along with professional SUV chassis tuning to ensure stability and comfort when the vehicle is cornering at high speed or passing over bumpy roads. The new car is equipped with a multifunctional steering wheel, an intelligent dual-mode anti-pinch electric sunroof, dual-zone automatic climate control, keyless entry + one-button start, adjustable rear seat angles, and other practical features. 2. Configuration: In terms of active/passive safety configurations, it is equipped with an ESP body stability system, intelligent tire pressure monitoring, hill start assist, hill descent control, TPMS intelligent tire pressure monitoring system, rear parking radar, rearview camera, TCS traction control system, RMI rollover mitigation system, and other functions.
5
4
Share

Where is the Car Sunroof Switch Located?

The sunroof switch is located at the position of the front row roof reading light in the car. Here is the relevant introduction: 1. Sunroof Introduction: The car sunroof is installed on the roof, which can effectively circulate the air inside the car and increase the intake of fresh air. At the same time, the car sunroof can also broaden the field of vision and meet the shooting needs of mobile photography and videography. Car sunroofs can be roughly divided into: sliding-out type, built-in type, built-in flip-out type, panoramic type, and curtain type. They are mainly installed on commercial SUVs, sedans, and other models. 2. Sunroof Advantages: Changing the traditional ventilation method, the car sunroof alters the conventional ventilation form. The wind blows in to form a stream of air that draws out the stale air inside the compartment. When the car is driving at high speed, air flows quickly around the car. When the sunroof is opened, a low-pressure area is formed outside the car. Due to the difference in air pressure inside and outside the car, the stale air inside the car can be drawn out, achieving ventilation and keeping the air inside the compartment fresh at all times.
5
1
Share

How to Use Rearview Mirrors for Reversing?

It is necessary to adjust the right rearview mirror to ensure that the top of the mirror can see the rear door handle while keeping the front door handle in the center of the mirror. Note that the car body should occupy 1/4 of the mirror area. For the left rearview mirror, ensure that the left rear wheel is visible when parking sideways, and also observe the distance between the right front of the vehicle on the left side of the parking space and the left end of your car's rear bumper through the left exterior mirror. There are three key reversing techniques: 1. Adjust the position between the car body and the corner of the parking space: Check the relationship between the car body and the corner of the parking space in advance. Observe through the rearview mirror to predict whether the car body will be too close or too far from the corner at the current angle, then steer to correct it. Ideally, maintain a distance of 30 cm between the car body and the corner. 2. Correct the car body inside the parking space: After the rear half of the car enters the parking space, steer to adjust. Observe the left and right rearview mirrors to determine which side the front of the car is tilting toward and which side the rear is tilting toward, then steer toward the tilting side to correct the car body. 3. Find the stopping point: Judge when to stop by observing the relationship between the left rearview mirror and the boundary line. When the left rearview mirror covers the boundary line, immediately press the clutch to stop.
14
1
Share

What grade of gasoline should a BMW X3 use?

BMW X3 should use 95-octane gasoline, as recommended in the vehicle's official user manual. In addition to checking the appropriate gasoline grade in the user manual, you can also find it on the fuel tank cap, which will be clearly marked. Generally, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95-octane gasoline. If the compression ratio is higher, 98-octane gasoline is recommended. However, with the application of new technologies, the gasoline grade cannot be solely determined by the compression ratio. A high compression ratio can also be adjusted to use lower-octane gasoline, as other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. If you occasionally use the wrong gasoline grade in a BMW X3, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower-octane gasoline, using higher-octane gasoline will not cause damage, but the increase in octane number will change the fuel's ignition point, leading to delayed combustion in the engine. This results in reduced engine power and thermal efficiency, with the actual feedback being poorer performance. For vehicles recommended to use higher-octane gasoline, using lower-octane gasoline can cause engine knocking. Due to the significantly lower octane number, the gasoline's ignition point decreases, causing premature ignition during the compression stroke. If combustion occurs before the spark plug ignites, resistance will arise during the upward stroke. This resistance makes the engine run very unstably. Mild knocking only increases noise without significant engine damage, but noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.
2
0
Share

Should I Buy the Geely Xingyue in Gray or Silver?

Choosing gray would be better as it is more resistant to dirt and offers better texture. Here are some details about the Geely Xingyue: 1. Introduction One: The Geely Xingyue is a compact sedan under the Geely brand. The dimensions of this car are 4785 mm in length, 1869 mm in width, and 1469 mm in height, with a wheelbase of 2800 mm. The Geely Xingyue is a four-door, five-seater sedan, and it comes standard with a 2.0-liter turbocharged four-cylinder engine. 2. Introduction Two: The 2.0-liter turbocharged engine of the Geely Xingyue delivers 190 horsepower. This engine can output maximum power at 4700 rpm, with a maximum torque of 300 Nm and a torque range of 1400 to 4000 rpm. The engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block, which reduces the engine's weight, thereby improving fuel economy and handling. The engine is paired with a 7-speed dual-clutch transmission. 3. Introduction Three: The front suspension of the Geely Xingyue uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension. The multi-link suspension enhances the wheel's grip, improving the car's handling and ride comfort. The multi-link suspension is an improvement over the double-wishbone suspension, replacing the two wishbones with separate links.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.