What are the exterior differences between the Porsche Macan and Cayenne?

1 Answers
IsabellaFitz
07/29/25 11:48pm
The exterior differences between the Porsche Macan and Cayenne are: 1. Different body dimensions: The Porsche Macan has a body length, width, and height of 4696mm, 1923mm, and 1624mm respectively; the Cayenne has a body length, width, and height of 4918mm, 1983mm, and 1696mm respectively. 2. Different license plate positions: The rear license plate of the Porsche Macan is fixed on the rear bumper; the rear license plate of the Cayenne is fixed on the trunk lid. The Porsche Macan is positioned as a midsize SUV, equipped with 2.0t, 2.9t, and 3.0t engines, paired with a 7-speed dual-clutch transmission. The Cayenne is positioned as a mid-to-large-size SUV, equipped with 2.9t, 3.0t, and 4.0t engines, paired with an 8-speed automatic transmission.
Was this review help?
17
2
Share
More Forum Discussions

How much engine oil can be added at one time?

How much engine oil can be added at one time depends on the type of engine, with the addition amount ranging from 3.5 to 8 liters. You can check the oil dipstick scale after adding the oil. Here are the details: Oil dipstick scale: There are two marks on the oil dipstick, one is the maximum mark, and the other is the minimum mark. The normal oil level should not be higher than the maximum mark or lower than the minimum mark. The oil level between these two marks is considered normal. Method for checking the oil level: After adding the oil, start the vehicle and then check the oil level 3 minutes after turning off the engine. This is because the oil filter needs to be replaced along with the oil, and the newly replaced oil filter does not contain any oil. After starting the vehicle, the oil will flow into the oil filter. Waiting for 3 minutes after turning off the engine allows the oil to flow back into the oil pan, ensuring a more accurate reading. Remember not to check the oil level on a slope, as the vehicle's tilt will cause the oil in the oil pan to tilt as well, resulting in an inaccurate oil level reading.
10
2
Share

How early can a motor vehicle undergo its annual inspection?

Motor vehicles can undergo their annual inspection up to 3 months in advance. For example, if a vehicle's inspection validity expires in September of this year, then the annual inspection period would be from July 1st to September 30th of this year. There are several ways to check the annual inspection time. The most straightforward method is to check the vehicle registration certificate and the electronic policy for compulsory traffic insurance, which contain the motor vehicle's registration date. The registration month is the month when the motor vehicle's annual inspection is due. Additionally, you can directly observe the annual inspection sticker, which displays the validity period of the inspection. Points to note about annual inspections: Vehicles that fail the annual inspection must be repaired within a specified time limit. If they still fail after the deadline, the vehicle management office will confiscate their license plates and prohibit them from continuing to operate. Vehicles that do not undergo the annual inspection without reason or fail the inspection are not allowed to drive on the road or transfer ownership. Vehicles that meet the scrapping conditions or have exceeded the prescribed service life will not be inspected, and their license plates will be revoked, their files canceled, and they will be scrapped.
2
0
Share

What is the oil specification for the Excelle?

The most commonly used original equipment manufacturer (OEM) oil specification for the Excelle is 5W-30, specifically Mobil 1 full synthetic oil. If you wish to change the oil during later maintenance, you can choose from brands like Mobil, SRS, Shell, and Castrol. The official Excelle manual recommends oil specifications of 5W-20, 5W-30, or 5W-40. The viscosity of engine oil changes with temperature, so it's crucial to pay attention to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the vehicle. The second number represents the oil's kinematic viscosity at 100°C. A higher number means the oil can maintain its viscosity index better at high temperatures, which can also be understood as providing better lubrication performance under high-temperature conditions. The method for changing the oil in an Excelle is as follows: Wait for the engine temperature to cool down, allowing the oil to drain back into the oil pan. Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for about 30 seconds to allow the oil in the main oil passages to drain out. Use a specialized wrench to remove the oil filter. Apply a small amount of new oil to the gasket of the new oil filter and hand-tighten it clockwise. Add the new oil through the oil filler cap on the engine's valve cover. Typically, fill up to three-quarters of the oil bottle. Start the engine and let it run for 5 minutes, checking for any leaks around the oil drain plug and oil filter. If leaks are found, perform necessary repairs. After turning off the engine, pull out the oil dipstick to check that the oil level is within the standard range.
2
2
Share

How long after the voice announcement in Subject 3 must the operation be completed?

After the voice announcement, the action must be completed within five seconds. Below is relevant information about driving test Subject 3: 1. Introduction: Subject 3 includes the road driving skills test and the safe and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment and is the abbreviated name for the road driving skills and safe and civilized driving knowledge test subjects in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle being licensed. 2. Specific test content of Subject 3: The road driving skills test generally includes: preparation before getting on the car, simulated light test, starting, driving straight, gear shifting operations, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, turning around, and driving at night. The safe and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and knowledge of handling after traffic accidents.
4
2
Share

Why is the vehicle inspection label yellow?

The yellow label for vehicle inspection is only used to distinguish the year of inspection expiration. Currently, there are three colors for vehicle inspection stickers, with a three-year cycle that is standardized nationwide, making it convenient for traffic police to check. Non-commercial vehicles are exempt from on-site inspection within the first 6 years, only requiring an inspection mark application every two years. For vehicles older than 6 years but less than 10 years, inspection is required every two years, meaning private cars only need on-site inspections twice within 10 years, specifically in the 6th and 8th years. Private cars aged 10-15 years require annual inspections, while those over 15 years old require inspections every six months. Commercial passenger vehicles within 5 years require annual inspections; those over 5 years require inspections every six months. Trucks and large/medium non-commercial passenger vehicles within 10 years require annual inspections; those over 10 years require inspections every six months. Motorcycles within 4 years require inspections every two years; those over 4 years require annual inspections. Vehicle inspection mainly includes the following items: Appearance inspection: Mainly checks vehicle lights, body appearance, suspension, sunroof, and tires, ensuring lights function properly, no unlit lights, no unauthorized body color changes, and no modifications to the suspension. Emission test: Checks whether the vehicle's tailpipe emissions meet national standards during high-speed operation. On-site inspection: Primarily examines the vehicle's braking system, headlights, horn, and chassis. Violation check: Before the inspection, all traffic violations must be cleared to pass. Vehicle inspection can be done up to 90 days in advance but must not be overdue. Consequences of overdue inspection include: Vehicles not inspected on time are not allowed on the road; driving an uninspected vehicle results in a 3-point penalty and a 200 RMB fine. If an uninspected vehicle is involved in a traffic accident, the driver bears full or primary responsibility, and insurance will not cover it. Driving an uninspected vehicle is considered illegal driving and may result in vehicle impoundment.
7
5
Share

Is a Physical Examination Required for a Driver's License?

"A physical examination is required when applying for a driver's license. The examination mainly includes vision tests, height and color recognition ability, hearing, as well as checks for abnormalities in the upper limbs, lower limbs, torso, and feet. Before taking the driver's license test, a physical examination is mandatory to determine whether the applicant meets the physical requirements for driving. Driver's license physical examination process: First, go to the local People's Hospital for the examination. If the driving school has a designated hospital for physical examinations, follow the school's instructions. Bring your ID card and personal belongings, as hospitals can be crowded, so keep your items secure. The hospital will have a designated area for the examination, which you can inquire about at the front desk or volunteer service counter. After completing the examination, the staff will provide a printed report. This report needs to be stamped at the service counter, and once stamped, the physical examination form is complete. Keep the examination invoice safe, as you will need to submit it to the driving school along with other required documents. Each subject can be taken once, with one retake allowed if failed. If you do not take the retake or fail the retake, the current test session ends, and you must reschedule the test. Within the 3-year validity period of the driving skill test permit, the number of test appointments for Subject 2 (road driving skills) and Subject 3 (road driving skills) cannot exceed 5 times each, meaning there are a total of 10 test opportunities for both subjects."
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.